| The Extron IN1608 is an
HDCP-compliant scaling presentation switcher with four HDMI inputs,
two universal analog video inputs, and two Extron DTP inputs. It
provides dual HDMI outputs and one DTP output. The DTP inputs and
output work with DTP endpoints to extend HDMI, audio, and
bidirectional control signals. Each DTP transmitter/receiver link
requires just a single shielded CATx cable. The IN1608 provides the
convenience of supporting local and remote sources and displays,
with fast and reliable source switching, and a high performance
scaling engine for HDMI and analog sources. The IN1608 also
includes a host of audio switching and processing features. It is
available with a built-in Class D audio power amplifier, and an
IPCP Pro 350 control processor for complete AV system control. |
• Integrates
HDMI, analog video, and audio sources into presentation systems
— The IN1608 provides centralized switching for a wide range
of AV sources.
• Inputs: Four HDMI; two universal 15-pin HD inputs for RGB,
component video, S-video, or composite video; two DTP twisted pair
inputs on RJ-45; six stereo balanced/unbalanced audio inputs on
captive screw; two mic/line audio inputs on captive screw
• Outputs: Three simultaneous video outputs – two HDMI
outputs, one DTP twisted pair output on RJ-45; one variable stereo
audio output on captive screw; one variable stereo audio output
configurable as dual mono on captive screw; speaker outputs on 5
mm, 4-pole captive screw connector – IN1608 SA Models or on 5
mm, 2-pole captive screw connector – IN1608 MA Models
• Two DTP inputs, four HDMI inputs, and two universal analog
video inputs — The IN1608 allows for switching between HDMI
and analog video sources. Two universal analog inputs accept all
standard analog video formats, including RGB, HD component video,
S-video, and composite video.
• Three simultaneous video outputs — One DTP twisted
pair output and two HDMI outputs are available for driving three
displays.
• Integrated DTP inputs and output support transmission of
HDMI, control, and analog audio over a shielded CATx cable —
Two DTP inputs and one DTP output support digital signal
transmission of HDMI plus control and analog audio over a shielded
CATx cable, providing high reliability and maximum performance on
an easily installed cable infrastructure. IN1608 IPCP models
support a maximum transmission distance of 330 feet (100 meters).
Standard IN1608, IN1608 MA, and IN1608 SA models support a maximum
transmission distance of 230 feet (70 meters).
• Compatible with CATx shielded twisted pair cable —
The IN1608 fully supports the maximum specified transmission
distance for all compatible resolutions when used with CATx
shielded twisted pair cable. Shielded twisted pair cabling with
solid center conductor sizes of 24 AWG or better is recommended for
optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly
recommended for optimal performance
• Bidirectional RS-232 and IR pass-through for AV device
control — Bidirectional RS-232 control and IR signals can be
transmitted alongside the video signal over DTP connections,
allowing the remote device to be controlled without the need for
additional cabling. Bidirectional control extension eliminates the
need for control system wiring to remote devices.
• Remote powering of DTP transmitters and receiver —
The IN1608 can provide power to two DTP transmitters and a DTP
receiver over the twisted pair connections, eliminating the need
for separate power supplies at the remote units.
• Compatible with all DTP Series models and DTP-enabled
products — Enables mixing and matching with desktop and
wallplate transmitters and receivers, as well as other DTP-enabled
products to meet application requirements.
• Available with integrated IPCP Pro 350 control processor
— IN1608 IPCP models include a built-in IPCP Pro 350 control
processor for complete AV system control.
◦ Supports TouchLink® Pro touchpanels
◦ Supports secure industry standard communications protocols
— Uses industry standard communication protocols, including
HTTP (insecure), HTTPS, SSH, SFTP, SMTP, NTP, Discovery Service,
DHCP, DNS, ICMP, and IPv4.
◦ Supports LinkLicense™ — Enables the use of
third party devices as primary control interfaces.
◦ Two bidirectional RS-232 ports with software handshaking
— Captive screw serial ports that can control two RS-232
devices.
◦ One bidirectional RS-232/RS-422/RS-485 port with hardware
and software handshaking — Captive screw serial port that can
communicate with one RS-232/RS-422/RS-485 serially controlled
device.
◦ Two IR/Serial ports for one-way control of external
devices
◦ Four Digital I/O ports — Allows for interfacing with
other systems in the room.
◦ Four relays for controlling room functions — Enables
control of lighting, screen settings, and other device
functions.
◦ Ethernet monitoring and control — Manage, monitor,
and control AV devices using a standard Ethernet network.
◦ Integrated three port network switch — Allows for
easy connection of touchpanels or other network controlled
devices.
◦ Supports 10/100/1000Base-T
◦ Supports Ethernet-controllable devices — Allows for
control of multiple Ethernet-enabled AV devices such as displays,
switchers, and sources.
◦ Automatic clock synchronization allows touchpanel to
display the accurate time and date
◦ Supports control system synchronization —
Synchronization will allow users to retain and recover the state of
their configured endpoints in case of network or power failure.
◦ Front panel port status indicators
◦ Multi-level password protection — Allows security to
be set based on user roles.
◦ Fully customizable using Extron control system software
— GUI Designer can be combined with Global
Configurator™ Plus or Global Configurator Professional.
◦ Controller groups — Allows multiple IP Link Pro
control processors to be grouped together to function as one when
configured with Global Configurator Professional.
◦ Library of enhanced Extron Certified device drivers —
Device drivers allow Extron products to control various display and
source devices, such as projectors, flat-panel displays, and
Blu-ray players. Extron has produced fully tested, Ethernet,
serial, and IR device drivers.
• Two mic/line inputs with 48 volt phantom power — Two
mic or line level audio sources can be independently mixed with
program audio and embedded onto the HDMI output. Selectable 48 volt
phantom power allows the use of condenser microphones.
• Mic ducking — Automatically reduces program audio
when a microphone signal is detected, replacing the need for a
separate audio ducking processor.
• Auto-switching between inputs — Auto-switching allows
for simple, unmanaged installation in locations such as in a
lectern or under a conference table. When multiple inputs are
active, the switching priority is configurable.
• HDMI audio embedding — Analog input audio signals can
be embedded onto the HDMI output signal.
• HDMI audio de-embedding — Embedded HDMI two-channel
PCM audio can be extracted to the analog outputs, or multi-channel
bitstream formats can be passed to the HDMI outputs.
• Selectable output rates from 640x480 to 1920x1200,
including HDTV 1080p/60 and 2K — Available output rates
include computer-video up to 1920x1200, HDTV rates up to 1080p/60,
and 2K.
• Advanced scaling engine with 30-bit processing and 1080i
deinterlacing — Image scaling and video format conversion are
performed at 30-bit precision for enhanced color accuracy and
picture detail. High performance deinterlacing for 1080i signals
from HD sources delivers optimized image quality.
• Available with energy efficient Class D stereo or mono
amplifier:
2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
1 x 100 watts @ 70 volts — All IN1608 power amplifier options
feature an Extron exclusive, highly efficient, advanced Class D
amplifier design with CDRS™ - Class D Ripple Suppression, an
Extron patented technology that provides a smooth, clean audio
waveform and an improvement in signal fidelity over conventional
Class D amplifier designs. CDRS eliminates the high frequency
switching ripple characteristic of Class D amplifiers, a source of
RF emissions which can interfere with sensitive AV equipment such
as wireless microphones.
• Automatic clip limiter — Detects onset of clipping,
automatically reducing gain to eliminate clipping and thereby
protecting speakers and amplifiers from distortion.
• HDCP compliant — Fully supports HDCP-encrypted
sources, with selectable authorization for unencrypted content.
• Supported HDMI specification features include data rates up
to 6.75 Gbps, Deep Color, and HD lossless audio formats
• Key Minder® continuously verifies HDCP compliance for
quick, reliable switching — Key Minder authenticates and
maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single
source signal to one or more displays.
• EDID Minder® automatically manages EDID communication
between connected devices — EDID Minder ensures that all
sources power up properly and reliably output content for
display.
• SpeedSwitch® Technology provides exceptional switching
speed for HDCP-encrypted content
• Output muting control — Provides the capability to
mute one or all outputs at any time. This allows, for example,
content to be viewed on a local monitor prior to appearing on the
main presentation display.
• Aspect ratio control — The aspect ratio of the video
output can be controlled by selecting a FILL mode, which provides a
full screen output, or a FOLLOW mode, which preserves the original
aspect ratio of the input signal.
• HDCP authentication and signal presence confirmation
— Provides real-time verification of HDCP status for each
digital video input and output. This allows for simple, quick, and
easy signal and HDCP verification through front panel LEDs, RS-232,
USB, or Ethernet, providing valuable feedback to a system operator
or helpdesk support staff.
• HDCP Visual Confirmation provides a green signal when
encrypted content is sent to a non-compliant display — A
full-screen green signal is sent when HDCP-encrypted content is
transmitted to a non-HDCP compliant display, providing immediate
visual confirmation that protected content cannot be viewed on the
display.
• HDMI to DVI Interface Format Correction —
Automatically enables or disables embedded audio and InfoFrames,
and sets the correct color space for proper connection to HDMI and
DVI displays.
• Seamless switching — Seamless cut through black and
fade through black transition effects are available to enhance
presentations by eliminating distractions during switching.
• Auto-Image™ setup — When activated, the unit
automatically optimizes the image by analyzing and adjusting to the
video input signal. This can save time and effort in setting up a
newly connected source, particularly in presentation environments
where different guest presenter laptops with various output
resolutions will be connected.
• Auto Input Memory — When activated, the unit
automatically stores size, position, and picture settings based on
the incoming signal. When the same signal is detected again, these
image settings are automatically recalled from memory.
• On-screen menus — Intuitive on-screen menus allow for
easy system setup using the front panel controls. Key parameters
such as input and output video formats and resolutions are
conveniently grouped on the initial Quick Setup screen, while
additional screens provide full control over the unit's other
functions and settings.
• Output Standby Mode — The unit can be set to
automatically mute video and sync output to the display device when
no active input signal is detected. This allows the projector or
flat-panel display to automatically enter into standby mode to save
energy and enhance lamp or panel life.
• Power Save Mode — The unit can be placed in a low
power standby state to conserve energy when not in use.
• Image freeze control — A live image can be frozen
using RS-232 serial control, USB, or Ethernet control.
• Picture controls for brightness, contrast, color, tint,
detail, as well as horizontal and vertical positioning, and
sizing
• User presets — Memory presets are available for each
input to store and recall optimized image settings.
• Automatic 3:2 and 2:2 pulldown detection — Advanced
film mode processing techniques that help maximize image detail and
sharpness for NTSC, PAL, and HDTV 1080i sources that originated
from film.
• Quad standard video decoding — A temporal, 3D
adaptive comb filter provides advanced decoding of composite NTSC
3.58, NTSC 4.43, PAL, and SECAM for integration into systems
worldwide.
• Internal video test patterns and pink noise generator for
calibration and setup — The unit offers several video test
patterns and audio pink noise to facilitate proper system setup and
calibration of display devices.
• Output volume control — Provides master volume
control for the variable line level and amplified audio
outputs.
• Audio input gain and attenuation — Gain or
attenuation can be adjusted for each audio input to eliminate
noticeable differences when switching between sources.
• Audio breakaway — Provides the capability to break an
analog audio signal away from its corresponding video signal and
route to the audio outputs, allowing the analog audio channels to
be operated as a separate switcher.
• Audio switching transitions — The audio output level
automatically ramps down and then ramps up to match the video
during switching transitions.
• Integrated audio delay — The audio output is
automatically delayed to compensate for latency introduced by the
video processing.
• Advanced audio configuration — The IN1608 offers
complete control of audio input and output gain, attenuation,
mixing, and ducking parameters via a user-friendly GUI.
• Input audio muting — The analog stereo or HDMI audio
inputs can be individually muted.
• Front panel security lockout — This feature locks out
all front panel functions except for input selection; all functions
however, are available through Ethernet, USB, or RS-232
control.
• Ethernet monitoring and control — Enables control and
proactive monitoring over a LAN, WAN, or the Internet. An intuitive
Web interface is included for full configuration of the unit.
• Built-in Web pages — Enables the use of a standard
browser for full control and troubleshooting over an intuitive Web
interface.
• RS-232 control port — Enables the use of serial
commands for integration into a control system. Extron products use
the SIS™ - Simple Instruction Set command protocol, a set of
basic ASCII commands that allow for quick and easy programming.
• Front panel USB configuration port — Enables easy
configuration without having to access the rear panel.
• RJ-45 signal and link LED indicators for DTP ports —
Provides a means for validating signal flow and operation, allowing
quick identification of connectivity issues.
• Easy setup and commissioning with Extron's PCS - Product
Configuration Software — Conveniently configure multiple
products using a single software application.
• Rack-mountable metal enclosure — The standard IN1608
model features a 1U, full rack width metal enclosure. Models with a
built-in power amplifier or control processor are housed in a 2U,
full rack width metal enclosure.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient internal universal power
supply — The 100-240 VAC, 50/60 Hz, international power
supply provides worldwide power compatibility with high
demonstrated reliability. |
| Video input |
| Number/signal
type |
|
| IN1608,
IN1608 SA, IN1608 MA |
2 RGB, RGBcvS, component video (YUVi or YUVp/HDTV),
S-video, composite video
4 HDMI digital video (HDCP compliant)
2 DTP 230 (HDCP compliant) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
2 RGB, RGBcvS, component video (YUVi or YUVp/HDTV),
S-video, composite video
4 HDMI digital video (HDCP compliant)
2 DTP 330 (HDCP compliant) |
| Connectors |
2 female 15-pin HD
4 female HDMI type A
2 female RJ-45 connectors |
| Nominal
level |
1 Vp-p for Y of component video and S-video, and for
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum
levels |
Analog: 0.0 V to 1.0 Vp-p with no offset at unity
gain |
| Impedance |
75 ohms |
| Horizontal
frequency |
15 kHz to 100 kHz |
| Vertical
frequency |
24 Hz to 75 Hz |
| Resolution
range |
640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM,
480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K
*reduced blanking |
| Return
loss |
>30 dB @ 5 MHz |
| DC offset (max.
allowable) |
1.5 V |
| Video processing |
| Decoder |
12 bit digital (3D-adaptive comb filter) |
| Analog
sampling |
12 bits per color; 13.5 MHz standard (video) 170 MHz
standard (RGB) |
| Digital pixel data
bit depth |
8, 10, or 12 bits per channel; 165 MHz pixel clock
(HDMI) |
| Colors |
1 billion (10 bit processing) |
| Video output |
| Number/signal
type |
|
| IN1608,
IN1608 SA, IN1608 MA |
2 HDMI digital video (HDCP compliant)
1 DTP 230 (HDCP compliant) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
2 HDMI digital video (HDCP compliant)
1 DTP 330 (HDCP compliant) |
| Connectors |
2 female HDMI
1 female RJ-45 connector |
| Scaled
resolution |
640x4806,8,9, 800x6006,8,9,
852x4806,8,9, 1024x7686,8,9,
1024x8526,8,9, 1024x10246,8,9,
1280x7686,8,9, 1280x8006,8,9,
1280x10246,8,9, 1360x7656,8,9,
1360x7686,8,9, 1365x7686,8,9,
1365x10246,8,9, 1366x7686,8,9,
1400x10506,8, 1440x9006,8,9,
1600x9006,8, 1600x12006,8,
1680x10506,8, 1920x12006,8
HDTV 480p7,8, 576p6,
720p3,4,5,6,7,8, 1080i6,7,8,
1080p1,2,3,4,5,6,7,8,
2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz,
3 = at 25 Hz,4 = at 29.97 Hz,
5 = at 30 Hz, 6 = at 50 Hz,
7 = at 59.94 Hz, 8 = at 60 Hz,
9 = at 75 Hz |
| Sync |
| Input
type |
RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component
video |
| Input
standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input
level |
2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video with tri-level sync
0.3 Vp-p for component video with bi-level sync or
RGsB |
| Input
impedance |
Horizontal: 510 ohms
Vertical: 510 ohms |
| Max. input
voltage |
5.0 Vp-p |
| Interconnection between IN1608 and DTP
transmitter/receiver |
| Connectors |
3 female RJ-45 |
| Termination
standard |
TIA/EIA-T568B |
| Signal transmission
distance |
|
| IN1608,
IN1608 SA, IN1608 MA |
Up to 230' (70 m) using shielded twisted pair cable or XTP
DTP 24 STP cable |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
Up to 330' (100 m) using shielded twisted pair cable or
XTP DTP 24 STP cable |
| Cable
requirements |
Solid conductor, 24 AWG or better |
| Cable
recommendations |
400 MHz bandwidth, STP (shielded twisted
pair) |
| NOTE |
Extron XTP DTP 24 shielded twisted pair cable is
strongly recommended for optimal performance. |
|
| Audio |
| Gain |
Unbalanced output: -6 dB; balanced output: 0
dB |
| Frequency
response |
20 Hz to 20k Hz, ±0.5 dB |
| THD +
Noise |
<0.1%, 20 Hz to 20k Hz at nominal level |
| S/N |
>90 dB at maximum balanced output
(unweighted) |
| Crosstalk |
≤-80 dB @ 1 kHz, fully loaded |
| Stereo channel
separation |
>80 dB @ 1 kHz |
| Bass |
+12 dB to -24 dB @ 100 Hz |
| Treble |
+12 dB to -24 dB @ 8 kHz |
| Audio input |
| Number/signal
type |
|
| IN1608,
IN1608 SA, IN1608 MA |
8 stereo line level balanced or unbalanced
2 mono mic/line level balanced or unbalanced (with available
phantom power)
4 stereo, de-embedded from HDMI (PCM only)
2 DTP 230 (de-embedded from HDMI [PCM only], or remote
balanced/unbalanced, analog) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
8 stereo line level balanced or unbalanced
2 mono mic/line level balanced or unbalanced (with available
phantom power)
4 stereo, de-embedded from HDMI (PCM only)
2 DTP 330 (de-embedded from HDMI [PCM only], or remote
balanced/unbalanced, analog) |
| Connectors |
(6) 3.5 mm captive screw connectors, 5 pole for line
(2) 3.5 mm captive screw connectors, 3 pole for mic/line
4 female HDMI type A
2 female RJ-45 connectors |
| Impedance |
>10k ohms unbalanced, >20k ohms
balanced |
| Nominal
level |
Line inputs: +4 dBu, -10 dBV, adjustable
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV,
adjustable |
| Maximum
level |
+21 dBu at rated THD+N when input gain is set to 0
dB |
| CMRR |
>80 dB @ 1 kHz |
| Input gain
adjustment |
Line inputs: -18 dB to +24 dB, 1 dB steps, adjustable per
input
Mic/line inputs: -18 dB to +60 dB, 1 dB steps, adjustable per
input |
| NOTE |
Unbalanced analog inputs applied at a DTP Tx input
have +12 dB of gain applied to bring the signal to a nominal level
for balanced operation. |
|
| DC phantom
power |
+48 VDC ±10% (can be switched on or off per mic/line
input) |
| Audio output |
| Number/signal
type |
|
| IN1608,
IN1608 SA, IN1608 MA |
1 balanced or unbalanced stereo (variable)
1 balanced or unbalanced stereo; can be configured as stereo or two
independently mixed mono channels
2 HDMI embedded
1 DTP 230 (embedded digital, and remote balanced/unbalanced
analog) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
1 balanced or unbalanced stereo (variable)
1 balanced or unbalanced stereo; can be configured as stereo or two
independently mixed mono channels
2 HDMI embedded
1 DTP 330 (embedded digital, and remote balanced/unbalanced
analog) |
| Connectors |
(2) 3.5 mm captive screw connectors, 5 pole
2 female HDMI
1 RJ-45 connector |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain
error |
±0.5 dB channel to channel |
| Maximum level
(Hi-Z) |
>+21 dBu, balanced; >+15 dBu,
unbalanced |
| Output volume
range |
0 to -100 dB in 1 dB steps |
| NOTE |
System gain for the analog DTP Rx output is rated
at -12 dB (unbalanced) and -6 dB (balanced). |
|
| Audio output — power amplifier (MA and
SA models only) |
| Number/signal
type |
|
| IN1608
SA, IN1608 IPCP SA |
1 stereo (default) or 2 mono (2 channels
total) |
| IN1608
MA, IN1608 IPCP MA 70 |
1 mono, 70 V line |
| Connectors |
|
| NOTE |
This connector accepts wires of 22 AWG to 12
AWG. |
|
| IN1608
SA, IN1608 IPCP SA |
(1) 5 mm screw lock captive screw connector, 4
pole |
| IN1608
MA, IN1608 IPCP MA 70 |
(1) 5 mm screw lock captive screw connector, 2
pole |
| Load
impedance |
|
| IN1608
SA, IN1608 IPCP SA |
4 ohms minimum |
| IN1608
MA, IN1608 IPCP MA 70 |
50 ohms minimum |
| High pass filter
— IN1608 MA, IN1608 IPCP MA 70 |
100 Hz, 12 dB/octave roll off |
| Frequency
response |
|
| IN1608
SA, IN1608 IPCP SA |
20 Hz to 20 kHz, -3 dB to +1 dB @ 1
W |
| IN1608
MA, IN1608 IPCP MA 70 |
100 Hz to 20 kHz, -3 dB to +1 dB @ 1 W |
| THD +
Noise |
<0.1% @ 1 kHz, 3 dB below clipping |
| S/N |
>90 dB, 20 Hz to 20 kHz, unweighted |
| Amplifier
type |
Class D |
| Output
power |
|
| IN1608
SA, IN1608 IPCP SA |
25 watts per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THD |
| IN1608
MA, IN1608 IPCP MA 70 |
100 watts (rms) @ 70 V, 1 kHz, 0.1% THD |
| Protection |
Clip limiting, thermal, short circuit, DC
output |
| Communications — scaling presentation
switcher |
| Serial control
port |
1 bidirectional RS-232, 3.5 mm captive screw connector, 3
pole (rear panel) |
| Baud rate and
protocol |
9600, 8 data bits, 1 stop bit, no parity
(default) |
| Serial control pin
configuration |
1 = Tx, 2 = Rx, 3 = Gnd |
| USB control
port |
1 front panel female mini USB B |
| USB
standards |
USB 2.0, high speed |
| IN1608, IN1608 MA,
IN1608 SA only |
|
| Ethernet
control port |
1 female RJ-45 connector |
| Ethernet
data rate |
10/100Base-T, half/full duplex with
autodetect |
| Ethernet
protocol |
ARP, ICMP (ping), IP, TCP, DHCP, HTTP,
Telnet |
| Ethernet
default settings |
Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
| Program
control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® |
| Communications — external device
(pass-through, unidirectional or bidirectional) (RS-232/IR over
DTP) |
| NOTE |
Protocol is mirrored between the connected
DTP endpoints and the "Over DTP" ports on the IN1608. Signals
from a control device pass into each IN1608 "Over DTP" port, are
embedded with the DTP signal, and sent to individual DTP Tx or Rx
endpoints for control of remote sink or source devices.
The "Over DTP" ports are simply pass-through connections to DTP
endpoints. There is no RS-232 or IR insertion from any IN1608
control port to the “Over DTP” ports. |
|
| Serial control
pass-through ports |
|
| "Over
DTP" input |
RS-232 via (2) 3.5 mm, 5 pole captive screw connectors
(shared with IR ports) |
| "Over
DTP" output |
RS-232 via (1) 3.5 mm, 5 pole captive screw connector
(shared with IR port) |
| Baud
rates |
Up to 115200 baud |
| Protocol |
6 - 8 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
flow control = XON, XOFF, none |
| Serial control pin
configuration |
1 = Tx, 2 = Rx, 3 = Gnd |
| IR pass-through
control ports |
TTL level (0 to 5 V) modulated infrared control from 30
kHz up to 60 kHz |
| IN1608
input/DTP Tx |
(2) 3.5 mm captive screw connectors, 5 pole (shared with
RS-232 ports) |
| IN1608
output/DTP Rx |
(1) 3.5 mm captive screw connector, 5 pole (shared with
RS-232 port) |
| IR control pin
configuration |
3 = Gnd, 4 = IR Tx, 5 = IR Rx |
| Communications — IPCP Pro 350 control
processor — IN1608 IPCP SA, IN1608 IPCP MA models
only |
| Memory |
|
| SDRAM |
512 MB |
| Flash |
4.5 GB |
| Software and control
options |
|
| Software |
Extron Global Configurator Plus and Professional for
Windows® |
| Control
options |
GlobalViewer®, TouchLink® for Web, TouchLink for
iPad®, or TouchLink Pro touchpanels |
| Ethernet
control |
|
| Network
interface controllers (NICs) |
1 |
| Network
switch |
1 unmanaged 3 port switch |
| Connectors |
3 female RJ-45 connectors |
| Data
rate |
10/100/1000Base-T, half/full duplex with
autodetect |
| Protocols |
DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH,
TCP/IP, UDP/IP |
| Default
settings |
Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1 |
| Serial
control |
|
| Quantity/type |
1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3) |
| Connectors |
(1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 pole |
| Baud
rate and protocol |
300 to 115200 baud (9600 baud = default); 8 (default) or 7
data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space
parity |
| NOTE |
The 5-pole ports support both hardware and
software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow
control. |
|
|
Pin
configurations, serial, 5-pole captive screw |
| RS-232
(default) |
Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 =
CTS |
| RS-422 |
Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 =
Rx+ |
| RS-485 |
Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5
(tied together) = data+ |
| Pin configurations, serial,
3-pole captive screw |
Pin 1 = Tx, 2 = Rx, 3 = Gnd |
| Digital I/O
control |
|
| Quantity/type |
4 digital input/output (configurable) |
| Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
| Digital
inputs |
|
| Input
voltage range |
0 to 24 VDC, clamped at +30 VDC |
| Input
impedance |
29k ohms |
| Programmable
pullup |
1k ohms to +5 VDC |
| Threshold
low to high |
>2.8 VDC |
| Threshold
high to low |
<2.0 VDC |
| Digital
outputs |
250 mA sink from 24 VDC max. |
| Pin
configurations |
1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 =
Gnd |
| IR/serial
control |
|
| Quantity/type |
2 programmable: unidirectional RS-232 (±5 V), or TTL
level (0 to 5 V) infrared (carrier and non-carrier) up to 300
kHz |
| Connector |
(1) 3.5 mm captive screw connector, 5-pole |
| Baud
rate and protocol (RS-232) |
300 to 115200 baud (9600 baud = default); 8 (default) or 7
data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space
parity |
| Pin
configurations |
For each port, pin 1 = signal, 2 =
Gnd |
| IR
output carrier frequency |
30 kHz to 300 kHz |
| Relay
control |
|
| Quantity/type |
4 normally open relays |
| Relay
control connectors |
(1) 3.5 mm captive screw connector, 6 pole |
| Relay
control contact rating |
24 VDC, 1 A |
| General |
| Power
supply |
Internal
Input: 100-240 VAC, 50-60 Hz |
|
Power
consumption |
| Full
load (amp output at 1/8 power) |
|
| IN1608 |
45 watts |
| IN1608
SA, IN1608 MA |
66 watts |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
77 watts |
| Power
save mode |
|
| IN1608 |
<33 watts |
| IN1608
SA, IN1608 MA |
<43 watts |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
<55 watts |
| Remote power
capability |
Supports up to three endpoints (two DTP Tx, one DTP
Rx) |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to
90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
| Cooling |
Fans, air flows right to left (as viewed from front
panel) |
|
Thermal
dissipation |
| Full
load (amp output at 1/8 power) |
|
| IN1608 |
85 BTU/hr |
| IN1608
SA, IN1608 MA |
120 BTU/hr |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
161 BTU/hr |
| Power
save mode |
|
| IN1608 |
75 BTU |
| IN1608
SA, IN1608 MA |
110 BTU |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
129 BTU |
| Mounting |
|
| Rack
mount |
Yes, with included, pre-installed brackets |
| Enclosure
type |
Metal |
|
Enclosure
dimensions |
| IN1608 |
1.75" H x 17.5" W x 9.5" D (1U high, full rack wide)
(4.4 cm H x 44.5 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack
ears.) |
| IN1608
SA, IN1608 MA |
3.5" H x 17.5" W x 9.5" D (2U high, full rack wide)
(8.9 cm H x 44.5 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack
ears.) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
3.5" H x 17.5" W x 9.5" D (2U high, full rack wide)
(8.9 cm H x 44.5 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack
ears.) |
|
Product
weight |
| IN1608 |
5.0 lbs (2.3 kg) |
| IN1608
SA, IN1608 MA |
7.4 lbs (3.4 kg) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
7.9 lbs (3.6 kg) |
|
Shipping
weight |
| IN1608 |
7 lbs (4 kg) |
| IN1608
SA, IN1608 MA |
11 lbs (5 kg) |
| IN1608
IPCP SA, IN1608 IPCP MA 70 |
12 lbs (6 kg) |
| DIM
weight |
|
| IN1608 |
8 lbs (4 kg) |
| IN1608
SA, IN1608 MA |
22 lbs (10 kg) |
| IN1608
IPCP SA, IN1608 IPCP MA |
22 lbs (10 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit
Association) |
|
Regulatory
compliance |
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental |
Complies with the appropriate requirements of RoHS,
WEEE. |
| Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at
±10%. |
|
|
| |
|
|
