Extron DMS 3200

Extron DMS 3200

Modular DVI Matrix Switcher

Home > Extron > Modular & Expandable Switchers > DMS 3200 Extron DMS 3200Extron DMS 3200
 Extron DMS 3200 Modular DVI Matrix Switcher
Extron DMS 3200
Product Code: DMS3200
Buy Sell Sales Extron DMS 3200

review button

Extron Matrix Switchers
< DVI Matrix Switchers

The Extron DMS Series Modular DVI Matrix Switchers represent a new level of matrix switching for DVI. They combine the simplicity and reliability of a fixed I/O matrix switcher with the convenience and flexibility of a modular matrix switcher. DMS Series matrix switchers accept any combination of available DMS DVI or DMS Fiber matrix boards. Input and output boards are available in 4-port input, 4-port output, and 4x4 I/O versions, providing various I/O size combinations with sizes from 4x4 to 36x36, depending on the DMS Matrix Switcher Frame selected. The DMS Series is ideal for a wide range of applications that require routing of high-resolution DVI digital video signals without copy protection.
• Available in I/O sizes from 4x4 to 20x20 or 32x32, depending on the DMS Matrix Switcher Frame selected
• Modular and field-upgradeable design — The DMS Series Matrix Switcher Frames provide substantial flexibility, expandability, and affordability by allowing users to select the configuration required for their systems. Additional input and output boards may be added at any time for easy and quick upgradeability or expansion, from 4x4 up to 32x32, depending on the DMS Frame size selected.
• Choice of DMS DVI or Fiber Matrix I/O boards — DMS Series DVI and Fiber Matrix input and output boards are available in 4-input, 4-output, and 4x4 I/O configurations. DMS Fiber Matrix Boards are compatible with Extron DFX Series DVI extenders, and can support transmitted distances up to 300 meters (984 feet) on one multimode fiber.
• Mix and match DVI and Fiber Matrix Boards — DMS DVI and Fiber Matrix Boards can be mixed-and-matched within a single DMS Frame to support a wide variety of matrix switching system designs.
• Supports data rates to 4.95 Gbps - 1.65 Gbps per color
• Supports computer video up to 1920x1200, including HDTV 1080p/60
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• QS-FPC™ - QuickSwitch Front Panel Controller with tri-color, backlit buttons — Provides a discrete button for each input and output, allowing for simple, intuitive operation. Buttons can be custom labeled for easy identification. The buttons illuminate red, green, or amber, depending on function, for ease of use in low-light environments.
• Ethernet monitoring and control — DMS Series matrix switchers can be proactively monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of I/O ties, EDID Minder configuration, and monitoring system status.
• Global presets — Up to 32 frequently used I/O configurations may be saved and recalled either from the front panel, serial, or Ethernet control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use.
• I/O Grouping — I/O Grouping allows the matrix switcher to be virtually divided into smaller sub-switchers. Specific outputs, such as those designated for a specific area or a particular room can be grouped together for ease of installation and control.
• Rooming — Rooming allows selected outputs into grouped together into specific "rooms", each with its own set of unique presets. A total of 10 rooms, with 10 presets per room, are available.
• View I/O mode — Users can easily view which inputs and outputs are actively connected.
• Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 and RS-422 remote control.
• RS-232 and RS-422 control port — Using serial commands, the DMS Series matrix switchers can be controlled and configured via the included Windows®-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.
• Optional remote control — The optional MKP 2000 and MKP 3000 X-Y Remote Control Panels provide the flexibility to control the DMS Series matrix switcher from a remote location.
• Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel controller.
• Rack-mountable, full rack width metal enclosures
Video — DMS DVI
   Routing 
      1600 Series  From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs
      2000 Series  From 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs
      3200 Series  From 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs
      3600 Series  From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs
   Gain  Unity
   Resolution range  Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz
   Signal type  Single-link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     The DMS DVI Series boards are not HDCP compliant.
      Digital audio  Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP  Not supported
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Standards  DVI 1.0
   Switching speed  200 ns, max.
Video input — DMS 44 DVI and DMS 4i DVI input boards
   Number/signal type  4 digital RGB single link DVI-D per input board
   Connectors  4 female DVI-I (digital only) per input board
   Equalization  Automatic
   Input cable length  100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — DMS 44 DVI and DMS 4o DVI output boards
   Number/signal type  4 digital RGB single link DVI-D per output board
   Connectors  4 female DVI-I (digital only) per output board
   Re-clocking  Automatic
   Output cable length  50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
   Peripheral device power  250 mA per output
Optical specifications — fiber optic boards
    NOTE     The I/O boards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
   Number/type  4 multimode fiber optic inputs and outputs (4 Tx and 4 Rx) per I/O board
   Connectors  4 or 8 LC connectors per I/O board
   Operating distance  300 m (985')
    NOTE     Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength  850 nm for multimode (MM)
   Transmission power  -5 dBm, typical
   Maximum receiver sensitivity  -12 dBm, typical
   Optical loss budget  8 dB, maximum
   Maximum channel data rate  6.25 Gbps
Video — fiber optic (DMS 44, DMS 4i, and DMI 4o fiber boards)
   Routing 
      1600 Series  4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs
      2000 Series  4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs
      3200 Series  4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs
      3600 Series  4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs
Video input — DMS 44 fiber and DMS 4i fiber input boards
    NOTE     The fiber optic input boards require connection to a DFX 100 Tx transmitter.
   Number/signal type  4 fiber optic, multimode (OM3 or OM4 fiber recommended)
   Connectors  4 LC connectors
   Input cable length  300 m (985')
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — DMS 44 fiber and DMS 4o fiber output boards
    NOTE     The fiber optic output boards require connection to a DFX 100 Rx receiver.
   Number/signal type  4 fiber optic, multimode (OM3 or OM 4 recommended)
   Connectors  4 LC connectors per board
   Output cable length  300 m (985')
Communications — switcher host ports
   Serial host control port  1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector
   Baud rate and protocol  9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin female D connector 
         RS-232  2 = Tx, 3 = Rx, 5 = Gnd
         RS-422  2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+
   USB control ports  1 front panel female mini USB B
   USB standards  USB 2.0, low speed
   Ethernet control port  1 RJ-45 female
   Ethernet data rate (for network communication)  10/100Base-T, half/full duplex with autodetect
   Ethernet protocol  ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
   Ethernet default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server  Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory
   Program control  Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet
General
   Power supply 
      DMS 1600  Internal: 1 or 2* (positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is optional.
      DMS 2000  Internal: 1
Input: 100-240 VAC, 50-60 Hz
      DMS 3200  Internal: 1
Input: 100-240 VAC, 50-60 Hz
      DMS 3600  Internal, 2*(positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is standard.
   Power consumption 
      DMS 1600  Primary power supply: 97 watts
Primary and redundant supplies: 107 watts
Measured fully loaded with (4) 4x4 I/O boards
      DMS 2000  116 watts
Measured fully loaded with (5) 4x4 I/O boards
      DMS 3200  174 watts
Measured fully loaded with (8) 4x4 I/O boards
      DMS 3600  212 watts
Measured fully loaded with (9) 4x4 I/O boards
      I/O boards 
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Fan, right to left (as viewed from front panel)
   Thermal dissipation, full load 
      DMS 1600  Primary power supply: 332 BTU/hr
Primary and redundant supplies: 366 BTU/hr
Measured fully loaded with (4) 4x4 I/O boards
      DMS 2000  398 BTU/hr
Measured fully loaded with (5) 4x4 I/O boards
      DMS 3200  596 BTU/hr
Measured fully loaded with (8) 4x4 I/O boards
      DMS 3600  724 BTU/hr
Measured fully loaded with (9) 4x4 I/O boards
   Rack mount  Yes
   Enclosure type  Metal
   Enclosure dimensions 
      DMS 1600  7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)
      DMS 2000  5.2" H x 17.0" W x 12.2" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)
      DMS 3200  8.7" H x 17.0" W x 12.2" D (5U high, full rack wide)
(22.1 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)
      DMS 3600  14.0" H x 17.0" W x 12.25" D (8U high, full rack wide)
(35.6 cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.)
   Product weight with boards installed 
      DMS 1600 
         With primary power supply only  26.9 lbs (12.2 kg)
 With both primary and redundant power supplies  27.9 lbs (12.6 kg)
      DMS 2000  16.4 lbs (7.5 kg)
      DMS 3200  27.1 lbs (12.3 kg)
      DMS 3600  38.5 lbs (17.5 kg)
   Shipping weight with boards installed 
      DMS 1600  32 lbs (15 kg)
      DMS 2000  21 lbs (10 kg)
      DMS 3200  33 lbs (15 kg)
      DMS 3600  48 lbs (22 kg)
   DIM weight with boards installed 
      USA/Canada 
         DMS 2000  23 lbs (11 kg)
         DMS 3200  39 lbs (18 kg)
      International 
         DMS 2000  28 lbs (13 kg)
         DMS 3200  47 lbs (22 kg)
         DMS 3600  52 lbs (24 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety  CE, c-UL, UL
      EMI/EMC 
         DMS 1600 and DMS 3600  CE, C-tick, FCC Class A, ICES, KCC, VCCI
         DMS 2000 and DMS 3200  CE, C-tick, FCC Class A, ICES, VCCI
      Environmental  Complies with the appropriate requirements of RoHS, WEEE
   Warranty  3 years parts and labor
 
 
Products
Fiber Optic
XTP CrossPoint
Twisted Pair
Modular & Expandable
ISM 824
SMX System MultiMatrix
DMS 1600
DMS 3600
DMS 2000
DMS 3200
FOX Matrix 3200
FOX Matrix 7200
FOX Matrix 14400
FOX Matrix 320x
Matrix 1K
Matrix 12800 Series
Matrix 3200 Series
Matrix 6400 Audio
Matrix 6400 Series
HDMI
DVI Switchers
SDI/HD-SDI
Ultra-Wideband RGB
Media Presentation
Scaling
VGA & Stereo Audio
AV Matrix Switchers

l

 

Extron 151214 Link  Link1  Link2 Singapore Dealer | distributor | reseller | where to buy in Singapore

Fiber Optic Matrix Switchers - FOB I/O 88 HD-SDI | SMX FOX Series | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 | SMX System MultiMatrix | FOX Matrix 320x | Matrix 1K |
XTP CrossPoint Matrix Switchers -
XTP CP 4i VGA Board | XTP CP 4o SA Board | XTP CP DVI PRO I/O Board | XTP CP HDMI I/O Boards | XTP CP I/O Boards | XTP CP 1600 Series |
XTP CP 3200 Series |
XTP Matrix Blank Plate |
Twisted Pair Matrrix Switchers -
MTPX 816 | MTPX 168 | MTPX 1616 | MTPX 1632 | MTPX 3216 | MTPX 3232 | MTPX PLUS 128 | MTPX PLUS 816 | MTPX PLUS 1616 | MTPX PLUS 3216 |
MTPX PLUS 168 | MTPX PLUS 1632 | MTPX PLUS 3232 | MTPX PLUS 6400 | MMX 32 VGA MTP |

Modular & Expandable Matrix Switchers -
ISM 824 | SMX System MultiMatrix | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 |
FOX Matrix 320x |
Matrix 1K | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series |
HDMI Switchers -
DTP CrossPoint 84 IPCP |
DXP HDMI Series | XTP CP 1600 Series | XTP CP 3200 Series | SMX System MulitMatrix | SMX HDMI Series |
DVI SWitchers -
DXP DVI Pro Series |
XTP CP 1600 Series | XTP CP 3200 Series | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | SMX DVI Series | SMX DVI Pro Series |
SDI/HD-SDI Switchers - HDXP Plus 3232 |
FOB I/O 88 HD-SDI | SMX Multi-Rate SDI Series | FOX Matrix 3200 | FOX Matrix 7200 | SMX System MultiMatrix |
Ultra-Wideband RGB Switchers - CrossPoint Ultra 84 | CrossPoint Ultra 88 | CrossPoint Ultra 128 |
CrossPoint Ultra 1212 | CrossPoint Ultra 168 | CrossPoint Ultra 1616 | CrossPoint 450Plus 2412 |
CrossPoint 450Plus 2424 | CrossPoint 450Plus 3216 | CrossPoint 450Plus 3232 | CrossPoint 450Plus 3248 | CrossPoint 450Plus 3264 | CrossPoint 450Plus 4832 | CrossPoint 450Plus 4848 |
CrossPoint 450Plus 4864 | CrossPoint 450Plus 6432 | CrossPoint 450Plus 6448 | CrossPoint 450Plus 6464 | ISM 824 | Matrix 12800 | Matrix 6400 Audio | Matrix 6400 Series | Matrix 3200 |
SMX Wideband Series | SMX Sync Series | SMX System MultiMatrix |
Media Presentation Matrix Switchers -
MPX 423 A | MPX 866 A | MPX Plus 866 A |
Scaling Matrix Switchers -
DTP CrossPoint 84 IPCP |
ISM 824 | ISM 482 |
VGA & Stereo Audio Matrix Switchers -
MMX 32 VGA A |
MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MVX 128 VGA A | MVX 168 VGA A | MVX 1212 VGA A |
SMX VGA Series | SMX System MultiMatrix |
AV Matrix Switchers  -
Composite Video  | MAV AV Series | MAV AV RCA Series | MAV 88 V | MAV Plus 88 AV | MAV Plus 816 AV | MAV Plus 128 AV | MAV Plus 168 AV | MAV Plus 1616 AV |
MAV Plus 2412 AV | MAV Plus 3232 AV |
MAV Plus 3248 AV | MAV Plus 3264 AV | MAV Plus 4832 AV | MAV Plus 4848 AV | MAV Plus 4864 AV | MAV Plus 6432 AV | MAV Plus 6448 AV |
MAV Plus 6464 AV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX System MultiMatrix |
S-Video - MAV SVA Series | MAV SVA RCA Series | MAV Plus 88 SV | MAV Plus 816 SV | MAV Plus 128 SV | MAV Plus 168 SV | MAV Plus 1616 SV | MAV Plus 2412 SV |
MAV Plus 2424 SV | MAV Plus 3216 SV | MAV Plus 3232 SV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX S-Video (2 BNC) Series |
SMX S-Video (4-pin DIN) Series) | SMX System MultiMatrix |
HDTV/Component - MMX 32 VGA A | MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MAV Plus 88 HD | MAV Plus 816 HD | MAV Plus 128 HD | MAV Plus 168 HD |
MAV Plus 1616 HD | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX Wideband Series | SMX System MultiMatrix |
Audio - MAV Plus 88 A | MAV Plus 164 A | MAV Plus 1616 A | MAV Plus 2424 A | MAV Plus 3248 A | MAV Plus 3264 A | MAV Plus 4832 A | MAV Plus 4848 A | MAV Plus 4864 A |
MAV Plus 6432 A | MAV Plus 6448 A | MAV Plus 6464 A | Matrix 12800 Series | Matrix 6400 Audio |
SMX Stereo Audio Series | SMX System MultiMatrix |

Portable air conditioner