| Extron HDXP Plus 3232 32x32 HD-SDI Matrix Switcher |
Product Code: HDXPPLUS3232
 |
The Extron HDXP Plus 3232 matrix switcher is
capable of routing SMPTE and ITU standard serial digital video signals. In
addition, the HDXP Plus 3232 will pass embedded audio, as well as ancillary ID
and metadata information, along with the digital video signal. It is ideal for
routing HDTV and other high resolution serial digital video sources for digital
cinema projection, biomedical imaging, satellite mapping and visualization,
rental and staging environments, and other applications.
Zero-Skew Design
The HDXP Plus Series utilizes a unique, zero-skew design that's optimized for
the switching of SMPTE 372M dual-link HD-SDI digital video signals. Adjacent
pairs of input and output connectors share equal data paths, ensuring that
dual-link signals are switched without undesirable timing errors. Incoming
signals are equalized to 330 feet (100 meters) or more on Extron RG6 or
equivalent cable.
HDXP Plus matrix switchers automatically adapt to the input signal rate, and the
output is automatically reclocked to the rate of the signal routed to it. In
addition to automatic reclocking, users can also disable reclocking, on a per
output basis, or preset output reclocking to a fixed rate. This ensures
standards independence, now and in the future, with virtually any serial digital
video data rate.
Switching Modes
The HDXP Plus Series features two discrete switching modes for
ease-of-operation. Matrix Switching Mode provides for selection of any input to
any or all outputs. Preview Mode allows any selected input to be routed to a
separate, dedicated preview output. The preview output is in addition to the
available program outputs, and eliminates the possibility of preview signals
being inadvertently routed to a live program output during a presentation
Control Features
The HDXP Plus Series is engineered with a range of innovative Extron control
features designed to simplify operation in critical presentation environments.
Key features include I/O grouping, which allows SDI and HD-SDI inputs and
outputs of different data rates to be grouped together, thus eliminating the
chance that an input of one data rate will be switched to an output requiring a
different rate. The HDXP Plus 3232 expands I/O grouping by including the
appropriate sync reference signal, bi-level for SDI and tri-level for HD-SDI,
with the video I/O group.
Extron's DSVP™ - Digital Sync Validation Processing provides verification of
both input data rates and reclocked output data rates through RS-232 as well as
Ethernet. DSVP adds a level of confidence when designing a multi-rate digital
video routing system with a variety of input and output digital signal types.
Ethernet Control
The HDXP Plus Series is equipped with an integrated, high performance Web server
that provides technical support personnel with the ability to receive service
and failure messages through an e-mail-enabled cell phone, PDA, pager, or e-mail
account. Utilizing Ethernet control, the help desk can also view embedded Web
pages to manage, monitor, and troubleshoot the switcher. |
•
Inputs: Video on female BNC connectors
• Outputs: Video on female BNC connectors
• Automatically adapts to SMPTE and ITU digital video standards for HD-SDI and
SDI — Complies with SMPTE 259M, ITU-R BT.601, SMPTE 292M, ITU-R BT.1120, and
SMPTE 372M standards.
• Supports data rates from 270 Mbps to 1.485 Gbps — Supports SDI, HD-SDI, and
SMPTE 372M dual-link HD-SDI digital video signals.
• Optimized for dual-link HD-SDI — Zero-skew design pairs adjacent input and
output connectors for superb performance with very high data rate signals, even
over long distances.
• Passes embedded audio, ancillary ID and metadata information, and SD/HD-SDTI
digital video signals — Passes all data allowed within published SMPTE and ITU
digital video standards, including embedded audio, ancillary ID and metadata
information, and SDTI (SMPTE 305M) and HD-SDTI (SMPTE 348M) digital video
signals.
• Input equalization — Equalizes input signals 330 feet (100 m) or more on
Extron RG6 or equivalent cable.
• Output reclocking
• User-selectable reclocking modes — The HDXP Plus Series automatically reclocks
SMPTE and ITU standard serial digital video rates. Reclockers can also be set to
a single, predetermined SMPTE/ITU standard data rate for optimum switching
performance, or bypassed to allow for switching nonstandard data rates.
• DSVP™ - Digital Sync Validation Processing — Polls inputs and outputs to
verify data rates. DSVP then transmits the information to the user through the
serial or Ethernet ports.
• Input preview mode with dedicated output — Provides preview of any available
input signal before switching to a live output. All program outputs remain
available for signal distribution.
• Video genlock — Separate bi-level and tri-level references are provided for
correct vertical interval switch timing for SDI and HD-SDI signals.
• 32 global presets — Frequently used I/O configurations may be saved and
recalled either from the front panel, Ethernet, or serial control.
• View I/O mode — Users can easily view which inputs and outputs are actively
connected.
• I/O grouping — Allows SDI and HD-SDI I/Os to be grouped separately, along with
the appropriate sync reference signal.
• Tri-color, backlit buttons can be custom labeled for easy identification —
Buttons illuminate red, green, or amber, depending on function, for ease of use
in low-light environments.
• QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete button for
each input and output, allowing for simple, intuitive operation.
• Ethernet monitoring and control — Enables the HDXP Plus matrix switchers to be
proactively monitored and managed over a LAN, WAN, or the Internet, using
standard TCP/IP protocols. Ethernet control provides for remote selection of
input and output ties, output reclocking mode, and advanced system diagnostics.
• RS-232 and RS-422 control port — Using serial commands, the HDXP Plus Series
can be controlled and configured via the included Windows-based control
software, or integrated into a control system. Extron products use the SIS™ -
Simple Instruction Set command protocol, a set of basic ASCII code commands that
allow for quick and easy programming. The RS-232 and RS-422 port also makes it
easy to install firmware updates.
• Optional control panels and keypads — Provide the flexibility to control a
HDXP Plus Series matrix switcher from a remote location.
• Internal universal power supply — For worldwide compatibility, the HDXP Plus
Series is equipped with a highly reliable, international power supply rated at
500,000 hours MTBF. |
|
Video |
|
Routing |
|
1616 Series |
16 x 17 matrix |
|
3232 Series |
32 x 33 matrix |
|
Gain |
Unity |
|
Data rates |
19 Mbps to 1.485 Gbps |
|
Auto data rate lock |
Yes |
|
Standard |
SMPTE 259M, SMPTE 292M, SMPTE 372M, ITU-R
BT.601, ITU-R BT.1120 |
|
Data types |
8 bit or 10 bit |
|
Video input |
|
Number/signal type |
16 or 32 SDI or HDSDI digital component
video |
|
Connectors |
16 or 32 female BNC |
|
Input cable equalization |
Automatic |
|
HD-SDI |
150 m using Extron RG6 or Belden 1694A cable
or equivalent
100 m using Extron RG59 or Belden 1505A cable or equivalent |
|
SDI |
200 m using Extron RG6 or Belden 1694A cable
or equivalent
150 m using Extron RG59 or Belden 1505A cable or equivalent |
|
Nominal level |
800 mV ±10% |
|
Impedance |
75 ohms |
|
Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
External sync (genlock), 3232
Series only |
-0.4V to +5.0 Vp-p; 1 bi-level, 1 tri-level |
|
Video output |
|
Number/signal type |
|
1616 Series |
16 SDI or HDSDI digital component video (8-
or 10-bit SMPTE 259M, SMPTE 292M) (Output 17 is a preview output.)
1 SDI or HDSDI digital component video (for preview output) |
|
3232 Series |
32 SDI or HDSDI digital component video (8-
or 10-bit SMPTE 259M, SMPTE 292M) (Output 33 is a preview output.)
1 SDI or HDSDI digital component video (for preview output) |
|
Connectors |
|
1616 Series |
16 female BNC
1 female BNC for preview output (labeled as output 17) |
|
3232 Series |
32 female BNC
1 female BNC for preview output (labeled as output 33) |
|
Nominal level |
800 mV ±10% |
|
Impedance |
75 ohms |
|
Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
|
DC offset (termin. @ 75 ohms) |
±500 mV with input at 0 offset |
|
Jitter |
<0.2 UI |
|
Rise and fall time (20-80%) |
SDI = 700 ps ± 100 ps
HD-SDI = 250 ps ± 100 ps |
|
Re-clocking |
Automatic, or bypass mode for nonstandard
rates, or fixed |
|
Control/remote — switcher |
|
Serial control ports |
1 RS-232 or RS-422, female 9-pin D connector
1 RS-232 front panel 2.5 mm mini stereo jack |
|
Baud rate and protocol |
9600 (default), 19200, 38400, 115200 baud
(adjustable); 8 data bits, 1 stop bit, no parity |
|
Serial control pin configurations |
|
9-pin D connector |
RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ |
|
Mini stereo jack |
RS-232: tip = Tx, ring = Rx, sleeve = GND |
|
Ethernet control port |
1 female RJ-45 connector |
|
Ethernet data rate |
10/100Base-T, half/full duplex with
autodetect |
|
Ethernet protocol |
ARP, ICMP (ping), IP, TCP, DHCP, HTTP,
Telnet |
|
Program control |
Extron control/configuration program for
Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet |
|
General |
|
Power supply |
Internal
Input: 100-240 VAC, 50-60 Hz |
|
Power consumption |
|
HDXP Plus 1616 |
23 watts |
|
HDXP Plus 3232 |
36 watts |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal dissipation |
|
HDXP Plus 1616 |
80 BTU/hr |
|
HDXP Plus 3232 |
125 BTU/hr |
|
Mounting |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
|
HDXP Plus 1616 |
3.5" H x 17.0" W x 9.4" D (2U high, full
rack wide)
(8.9 cm H x 43.2 cm W x 23.9 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
|
HDXP Plus 3232 |
5.25" H x 17.0" W x 9.4" D (3U high, full
rack wide)
(13.3 cm H x 43.2 cm W x 23.9 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
|
Product weight |
|
HDXP Plus 1616 |
8.9 lbs (4.1 kg) |
|
HDXP Plus 3232 |
11.9 lbs (5.4 kg) |
|
Shipping weight |
|
HDXP Plus 1616 |
15 lbs (7 kg) |
|
HDXP Plus 3232 |
18 lbs (9 kg) |
|
DIM weight, international |
25 lbs (12 kg) |
|
Vibration |
ISTA 1A in carton (International Safe
Transit Association) |
|
Compliances |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Warranty |
3 years parts and labor |
|
| |
|
|
| |
|
l
|
