Extron MMX 32 VGA MTP
3x2 VGA and Audio Matrix Switcher with MTP Twisted Pair Output

Extron XTP Systems
Home > Extron > Twisted Pair Matrix Switchers > MMX 32 VGA MTP email uscontact us
Extron MMX 32 VGA MTP 3x2 VGA and Audio Matrix Switcher with MTP Twisted Pair Output
Extron MMX 32 VGA MTP
Product Code: MMX32VGAMTP
 Buy Sell Sales Extron MMX 32 VGA MTP
review button

The MMX 32 VGA MTP is a 3x2 VGA and stereo audio matrix switcher with a built-in Extron MTP Series twisted pair transmitter for computer-video and summed mono audio signals. The transmitter is capable of driving 1920x1200 WUXGA resolution computer-video signals 450 feet (135 meters) or more over a single CAT 5-type cable.

The MMX 32 VGA MTP is compatible with high resolution computer-video signals, as well as HDTV signals with bi-level or tri-level sync, component video, S-video, composite video, and stereo audio signals. The matrix switcher can be controlled via the front panel, through RS-232, with a third party control system, or by contact closure with the optional MMX 32 AAP and MMX 32 MAAP control modules.

Housed in a compact 1U, half rack width metal enclosure, the MMX 32 VGA MTP is designed for a variety of small system computer-video and stereo audio signal routing applications, such as classrooms and conference rooms, where a PC, document camera, and other sources often need to be switched to both local and remote displays.
� Inputs: Three female 15-pin HD connectors with 3.5 mm mini stereo jacks
� Outputs: One female 15-pin HD connector and one RJ-45 connector; audio on captive screw and 3.5 mm mini stereo jacks; summed mono audio on RJ-45 connector
� Selectable pre-peaking
� 300 MHz (-3 dB) RGB video bandwidth, fully loaded � Ensures switching of most high resolution signals without degradation.
� Optional MMX 32 AAP and MMX 32 MAAP remote control modules � Optional control modules provide remote input selection per output. The MMX 32 AAP is a single space AAP - Architectural Adapter Plate, while the MMX 32 MAAP is a single space MAAP - Mini Architectural Adapter Plate. Both include three input selection buttons with corresponding LED indicators.
� Built-in MTP transmitter
� Transmits RGBHV and audio signals over a single CAT 5-type cable
� Compatible with MTP Series receivers
� Buffered I/O � Each input and output is individually buffered to provide maximum performance with virtually no crosstalk.
� Supports HDTV component video, bi-level or tri-level sync
� Audio breakaway via RS-232 � Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio signals to be operated as a separate matrix switcher.
� RS-232 control port � Using serial commands, the MMX 32 VGA MTP can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS� - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 port also makes it easy to install firmware updates.
� Contact closure remote control with tally output status � Allows for remote selection of an input channel, while a tally output status LED provides feedback to indicate which input is currently selected.
� Front panel security lockout � Prevents unauthorized use in non-secure environments.
� Rack-mountable � 1U, half rack width metal enclosure can be rack-mounted using an optional rack shelf.
� Highly reliable, energy-efficient external universal power supply included, replacement part #70-775-01 � Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.
Video
   Routing  3 x 2 matrix
   Gain  Unity
   Bandwidth  300 MHz (-3 dB), fully loaded
0 - 10 MHz: No more than +0.1 dB to -0.1 dB
0 - 130 MHz: No more than +2 dB to -0.1 dB
   Crosstalk  -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
   Switching speed  200 ns (max.)
Video input � MMX 32 VGA A, MMX 32 VGA MTP transmitter
   Number/signal type  3 RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync), S-video, or composite video
   Connectors  3 female 15-pin HD
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: -0.5 V to 2.0 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 145 kHz
   Vertical frequency  30 Hz to 170 Hz
   Return loss  <-42 dB @ 5 MHz
   DC offset (max. allowable)  4.0 V
Video output � MMX 32 VGA A, MMX 32 VGA MTP receivers
   Number/signal type  2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync), S-video, or composite video
   Connectors   
      MMX 32 VGA A  1 female 15-pin HD
5 female BNC
      MMX 32 VGA MTP receivers  1 female 15-pin HD
1 female RJ-45 (for proprietary analog signals to be received by MTP R 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ)
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.3 V to 2.0 Vp-p
   Impedance  75 ohms
   Return loss  <-30 dB @ 5 MHz
   DC offset   
      MMX 32 VGA A  �5 mV maximum with input at 0 offset
      MMX 32 VGA MTP receivers  <�20 mV with input at 0 offset
Sync
   Input type  RGBHV, RGBS, RGsB, RsGsBs
   Output type  RGBHV, RGBS, RGsB
   Input level  TTL: 2.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  TTL: 4 V to 5 Vp-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Max. input voltage  5 Vp-p
   Max. propagation delay  30 ns
   Max. rise/fall time  4.2 ns
   Polarity   
      MMX 32 VGA A  Positive or negative (follows input)
      MMX 32 VGA MTP receivers  Positive or negative (selectable at receiver)
Audio
   Routing  3 x 2 stereo matrix
   Gain   
      MMX 32 VGA A   
         Output 1  Unbalanced output: 0 dB
         Output 2  Unbalanced output: 0 dB; balanced output: +6 dB
      MMX 32 VGA MTP   
         Output 1 (local output)  Unbalanced output: 0 dB
         Output 2a (CAT 5 receiver)  Unbalanced output: +0 dB; balanced output: +6 dB
         Output 2b  Unbalanced output: +0 dB; balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, �0.05 dB
   THD + Noise   
      MMX 32 VGA A  0.03% @ 1 kHz, 0.3% @ 20 kHz nominal level
      MMX 32 VGA MTP  0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >90 dB at maximum output (unweighted)
   Crosstalk   
      MMX 32 VGA A  <-80 dB @ 1 kHz, fully loaded
      MMX 32 VGA MTP  <-76 dB @ 1 kHz, fully loaded
   Stereo channel separation   
      MMX 32 VGA A  >-90 dB @ 1 kHz
      MMX 32 VGA MTP  >-76 dB @ 1 kHz
   CMRR  >-75 dB @ 20 Hz to 20 kHz
Audio input � MMX 32 VGA A, MMX 32 VGA MTP transmitter
   Number/signal type  3 stereo, PC level, unbalanced
   Connectors  (3) 3.5 mm mini stereo jacks
   Impedance   
      MMX 32 VGA A  25k ohms balanced/unbalanced, DC coupled
      MMX 32 VGA MTP transmitter  >3k ohms, balanced/unbalanced AC coupled
   Nominal level  -10 dBV (316 mVrms)
   Maximum level  +8.5 dBu, (unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output � MMX 32 VGA A, MMX 32 VGA MTP receivers
   Number/signal type   
      MMX 32 VGA A  2 stereo, balanced/unbalanced
      MMX 32 VGA MTP receivers  2 stereo, balanced/unbalanced, PC level
1 summed stereo-to-mono on RJ-45
   Connectors   
      MMX 32 VGA A  (1) 3.5 mm mini stereo audio jack (unbalanced)
(1) 3.5 mm captive screw connector, 5 pole
      MMX 32 VGA MTP receivers  (1) 3.5 mm mini-stereo audio jack (unbalanced)
(1) 3.5 mm captive screw connector, 5 pole
(1) RJ-45
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  �0.1 dB channel to channel
   Maximum level (Hi-Z)   
      MMX 32 VGA A  Program audio: >+21 dBu, balanced or unbalanced at 1% THD+N
      MMX 32 VGA MTP receivers, output 2  >+17 dBu, balanced or unbalanced at 1% THD+N
   Maximum level (600 ohm)   
      MMX 32 VGA A  Program audio: >+14 dBm, balanced or unbalanced at 1% THD+N
      MMX 32 VGA MTP receivers, output 2  >+14 dBm, balanced or unbalanced at 1% THD+N
Control/remote � switcher
   Serial control port   
      MMX 32 VGA A  RS-232, female 9-pin D connector
      MMX 32 VGA MTP  RS-232, 3.5 mm captive screw connector, 3 pole
   Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      MMX 32 VGA A  2 = TX, 3 = RX, 5 = GND
      MMX 32 VGA MTP  1 = TX, 2 = RX, 3 = GND
   Contact closure   
      MMX 32 VGA A  1 female 9-pin D connector (also used as the serial control port)
      MMX 32 VGA MTP  (2) 3.5 mm captive screw connectors, 5 pole
   Contact closure pin configurations
      MMX 32 VGA A  Output 1: 1= input 1, 4 = input 2, 6 = input 3, 5 = GND
Output 2: 7= input 1, 8 = input 2, 9 = input 3, 5 = GND
      MMX 32 VGA MTP  Output 1: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
Output 2: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
   Program control  Extron control/configuration program for Windows�
Extron Simple Instruction Set (SIS�)
General
   External power supply  100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
   Power input requirements  12 VDC, 0.7 A
   Temperature/humidity  Storage: -40 to +158 �F (-40 to +70 �C) / 10% to 90%, noncondensing
Operating: +32 to +122 �F (0 to +50 �C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Mounting   
      Rack mount  Yes, with optional 1U rack shelf
      Furniture mount  Yes, with optional under-desk mounting kit
   Enclosure type  Metal
   Enclosure dimensions   
      MMX 32 VGA A  1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.)
      MMX 32 VGA MTP  1.75" H x 8.75" W x 6.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 15.24 cm D
(Depth excludes connectors.)
   Product weight   
      MMX 32 VGA A  2.5 lbs (1.1 kg)
      MMX 32 VGA MTP  2.5 lbs (1.1 kg) (The twisted pair receiver is sold and shipped separately.)
   Shipping weight  5 lbs (2.3 kg) per MMX 32 VGA A or per MMX 32 VGA MTP transmitter
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   Warranty  3 years parts and labor
 
 
Products
Fiber Optic
XTP CrossPoint
Twisted Pair
MTPX 816
MTPX 168
MTPX 1616
MTPX 1632
MTPX 3216
MTPX 3232
MTPX PLUS 128
MTPX PLUS 816
MTPX PLUS 1616
MTPX PLUS 3216
MTPX PLUS 168
MTPX PLUS 1632
MTPX PLUS 3232
MTPX PLUS 6400
MMX 32 VGA MTP
Modular & Expandable
HDMI
DVI Switchers
SDI/HD-SDI
Ultra-Wideband RGB
Media Presentation
Scaling
VGA & Stereo Audio
AV Matrix Switchers

 

View our Articles on line 2023