|
Extron MTPX 3232 32x32 MTP Twisted Pair Matrix Switcher for RGBHV,
Video, Audio, and RS-232 |
Product Code:
MTPX3232
 |
The Extron MTPX 3232 Twisted
Pair Matrix Switcher offers
an innovative feature set
for simplifying twisted pair
AV system integration.
Local video and audio inputs
and outputs enable direct
connection of equipment
located within the same rack
as the MTPX 3232,
eliminating the need for
additional MTP transmitters
and receivers. Additional
features include switchable
pre-peaking on eight of the
MTP outputs to drive signals
long distances, audio input
gain and attenuation to
balance audio levels, and
output volume control for
the local audio outputs.
When paired with Extron MTP
U R Series Universal
Receivers, MTPX Series
Twisted Pair Matrix
Switchers allow composite
video, S-video, and VGA,
along with audio or RS-232
control signals, to be sent
over a single CAT 5-type
cable and output on the
appropriate connector at the
display. Using one cable for
all signal types simplifies
system wiring and uses only
a single matrix switcher
output and MTP U R Series
receiver per display.
The powerful feature set in
the MTPX 3232 Twisted Pair
Matrix Switcher enables
integrators to greatly
reduce installation time and
costs associated with rack
space, cabling, and
installation, when compared
to traditional twisted pair
matrix switching. MTPX
Series matrix switchers are
ideal for command and
control centers, classroom
buildings, auditoriums,
large entertainment venues,
and other video, audio, and
control signal routing
applications. |
� Input: Female RJ-45
connectors for UTP, female
15-pin HD for video, and
captive screw connectors for
audio
� Output: Female RJ-45
connectors for UTP, female
15-pin HD for video, and
captive screw connectors for
audio
� Local high resolution
video inputs and outputs �
Accept input from local
video sources without the
need for additional
transmitters and receivers.
� Local audio inputs and
outputs � Support stereo
audio sources and output
unbalanced line level mono
audio for processing, or
distribution.
� Audio input gain and
attenuation � Eliminates
noticeable differences in
volume when switching
between sources.
� Local audio output volume
adjustment and muting �
Eliminates the need for
preamplifiers in many AV
systems.
� Switchable video
pre-peaking on 25% of the
outputs � Provides
additional compensation for
optimal performance on the
longest cable runs.
� QS-FPC� - QuickSwitch
Front Panel Controller � A
separate button for each
input and output, enables
simple, intuitive operation.
� Compatible with Extron MTP
products � Works with all
MTP Series transmitters and
receivers, including the MTP
U R Series Universal Twisted
Pair Receivers.
� Front panel security
lockout � Restricts access
in unsecured environments.
� View I/O mode � Easily
view which inputs and
outputs are actively
connected.
� Global presets � Allow you
to set up I/O configurations
and store them in memory for
future use.
� RS-232 and RS-422 control
port � Enables switcher
control and configuration
via the Extron Windows-based
control program, or
integration into a control
system.
� Front panel configuration
port � For convenient
configuration access after
installation is complete.
� Rack-mountable metal
enclosure � All MTPX Series
twisted pair matrix
switchers are housed in
either 2U or 3U, full
rack-width metal enclosures.
� Highly reliable,
energy-efficient internal
universal power supply � The
100-240 VAC, 50/60 Hz,
international power supply
provides worldwide power
compatibility with high
demonstrated reliability. |
|
Video |
|
Routing |
|
|
MTPX 816 |
8 x 16 matrix, 3 x 1
local |
|
MTPX 168 |
16 x 8 matrix, 3 x 1
local |
|
MTPX 1616 |
16 x 16 matrix, 3 x 1
local |
|
MTPX 1632 |
16 x 32 matrix, 6 x 2
local |
|
MTPX 3216 |
32 x 16 matrix, 6 x 2
local |
|
MTPX 3232 |
32 x 32 matrix, 6 x 2
local |
|
Gain |
Unity |
|
Crosstalk |
|
|
816, 168,
1616 models |
-80 dB @ 1 MHz, -71 dB @
5 MHz, -55 dB @ 10 MHz,
-45 dB @ 30 MHz, -37 dB
@ 100 MHz |
|
1632, 3216,
3232 models |
-90 dB @ 1 MHz, -76 @ 5
MHz, -72 dB @ 10 MHz,
-60 dB @ 30 MHz, -50dB @
100 MHz |
|
Switching
speed |
200 ns (max.) |
|
Video input � local |
|
Number/signal
type |
3 or 6 analog RGBHV,
RGBS, RGsB, RsGsBs,
component video
(bi-level and
tri-level), S-video,
composite video |
|
Connectors |
3 or 6 female 15-pin HD |
|
Nominal level |
0.7 Vp-p for RGB |
|
Minimum/maximum
levels |
0.3 V to 1.45 Vp-p with
no offset at unity gain |
|
Impedance |
75 ohms |
|
Horizontal
frequency |
15 kHz to 130 kHz |
|
Vertical
frequency |
30 Hz to 150 Hz |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset (max.
allowable) |
250 mV |
|
Video input � main (see
transmitters' output
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Video output � local |
|
Number/signal
type |
1 or 2 analog RGBHV,
RGBS, RGsB, RsGsBs,
component video
(bi-level and tri-level
sync), S-video,
composite video |
|
Connectors |
1 or 2 female 15-pin HD |
|
Nominal level |
0.7 Vp-p for RGB |
|
Impedance |
75 ohms |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset |
<�20 mV with input at 0
offset |
|
Video output � main (see
receivers' input
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Sync � local inputs and
outputs only |
|
Input type |
RGBHV, RGBS, RGsB,
RsGsBs |
|
Output type |
See receiver
specifications (see
specifications on Web
site). |
|
Input level |
3.5 V to 5.5 Vp-p,
unterminated; 4.0 Vp-p
normal |
|
Output level |
See receiver
specifications (see
specifications on Web
site). |
|
Input
impedance |
573 ohms � 5% |
|
Output
impedance |
110 ohms |
|
Max. input
voltage |
5.0 Vp-p |
|
Max. rise/fall
time |
4 ns |
|
Polarity |
Positive or negative |
|
Audio |
|
Routing |
|
|
MTPX 816 |
8 x 16 mono matrix, 3 x
4 local |
|
MTPX 168 |
16 x 8 mono matrix, 3 x
4 local |
|
MTPX 1616 |
16 x 16 mono matrix, 3 x
4 local |
|
MTPX 1632 |
16 x 32 mono matrix, 6 x
8 local |
|
MTPX 3216 |
32 x 16 mono matrix, 6 x
8 local |
|
MTPX 3232 |
32 x 32 mono matrix, 6 x
8 local |
|
Gain (local
inputs and outputs) |
Unbalanced output: 0 dB;
balanced output: +6 dB |
|
Frequency
response |
20 Hz to 20 kHz, �1 dB |
|
THD + Noise |
0.15% @ 1 kHz at nominal
level |
|
S/N |
>70 dB at maximum output
(unweighted) |
|
CMRR |
>43 dB @ 20 Hz to 20 kHz |
|
Audio input � local |
|
Number/signal
type |
3 or 6 stereo,
balanced/unbalanced |
|
Connectors |
(3) or (6) 3.5 mm
captive screw
connectors, 5 pole |
|
Impedance |
>10k ohms unbalanced |
|
Nominal level |
+4 dBu (1.23 Vrms), -10
dBV (316 mVrms) |
|
Maximum level |
+18 dBu, balanced or
unbalanced at 1% THD+N |
|
NOTE |
0 dBu = 0.775
Vrms, 0 dBV = 1
Vrms, 0 dBV ≈ 2
dBu
|
|
|
Audio input � main (see
transmitters' output
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Audio output � local |
|
Number/signal
type |
4 or 8 dual mono,
balanced/unbalanced |
|
Connectors |
(4) or (8) 3.5 mm
captive screw
connectors, 5 pole |
|
Impedance |
50 ohms unbalanced, 100
ohms balanced |
|
Gain error |
�1 dB channel to channel |
|
Maximum level
(Hi-Z) |
+18 dBu, balanced or
unbalanced at 1% THD+N |
|
Maximum level
(600 ohm) |
+15 dBm, balanced or
unbalanced at 1% THD+N |
|
Audio output � main (see
receivers' input
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Control/remote �
switcher host control
|
|
Serial host
control ports |
1 RS-232 or RS-422, rear
panel 9-pin female D
connector
1 RS-232 front panel 2.5
mm mini stereo jack |
|
Baud rate and
protocol |
9600 baud (default),
19200, 38400, and115200
(adjustable); 8 data
bits; 1 stop bit; no
parity |
|
Serial control pin
configurations |
|
9-pin female
D connector |
RS-232: 2 = Tx, 3 = Rx,
5 = GND
RS-422: 2 = Tx-, 3 =
Rx-, 5 = GND, 7 = Rx+, 8
= Tx+ |
|
Mini stereo
jack |
Tip = Tx, ring = Rx,
sleeve = GND |
|
Program
control |
Extron
control/configuration
program for Windows�
Extron Simple
Instruction Set (SIS�) |
|
General |
|
Recommended
cable type |
CAT 5/5e/6/7 (shielded
or unshielded) |
|
Power |
100 VAC to 240 VAC,
50-60 Hz, internal |
|
1632, 3216,
3232 models |
220 watts |
|
816, 168,
1616 models |
120 watts |
|
Temperature/humidity |
Storage: -40 to +158 �F
(-40 to +70 �C) / 10% to
90%, noncondensing
Operating: +32 to +122
�F (0 to +50 �C) / 10%
to 90%, noncondensing |
|
Cooling |
Fan, left to right (as
viewed from the front
panel) |
|
Thermal
dissipation |
|
|
1616 model |
|
|
115 VAC,
60 Hz |
211.7 BTU/hr |
|
240 VAC,
50 Hz |
218.7 BTU/hr |
|
3232 model |
|
|
115 VAC,
60 Hz |
333.6 BTU/hr |
|
240 VAC,
50 Hz |
355.9 BTU/hr |
|
Mounting |
Rack mountable |
|
Enclosure type |
Metal |
|
Enclosure
dimensions |
|
|
1632, 3216,
3232 models |
5.25" H x 17.0" W x 9.4"
D (3U high, full rack
wide)
(13.3 cm H x 43.1 cm W x
23.9 cm D)
(Depth excludes
connectors. Width
excludes rack ears.) |
|
816, 168,
1616 models |
3.5" H x 17.0" W x 9.4"
D (2U high, full rack
wide)
(8.9 cm H x 43.1 cm W x
23.9 cm D)
(Depth excludes
connectors. Width
excludes rack ears.) |
|
Product weight |
|
|
1632, 3216,
3232 models |
16 lbs (7.3 kg) |
|
816, 168,
1616 models |
8.5 lbs (3.9 kg) |
|
Shipping
weight |
|
|
1632, 3216,
3232 models |
26 lbs (ll.8 kg) |
|
816, 168,
1616 models |
18 lbs (9 kg) |
|
DIM weight
(International) |
|
|
1632, 3216,
3232 models |
26 lbs (11.8 kg) |
|
816, 168,
1616 models |
18 lbs (8 kg) |
|
Vibration |
ISTA 1A in carton
(International Safe
Transit Association) |
|
Regulatory compliance |
|
Safety |
CE, CUL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A,
ICES, VCCI |
|
Environmental |
Complies with the
appropriate requirements
of WEEE. |
|
Warranty |
3 years parts and labor |
|
| |
|
|
| |
|
|
