|
Extron MTPX Plus 6400 MTP Twisted Pair Matrix Switcher for RGBHV,
Video, Audio, and RS-232 |
Product Code:
MTPXPLUS6400
 |
The Extron MTPX Plus 6400
Series represents the next
level of large-scale twisted
pair matrix switching,
building on the success of
the MTPX Plus Series product
line. The MTPX Plus 6400
Series simplifies the design
and integration of complex
twisted pair matrix
switching systems by
offering advanced,
integration-friendly
features that dramatically
reduce costs associated with
rack space, cabling, and
installation. The MTPX Plus
6400 Series is available in
five different I/O sizes,
from 48x48 to 64x64. In
addition to offering all of
the same features found in
the MTPX Plus Series, the
MTPX Plus 6400 Series
provides EDID Minder� for
local inputs and outputs,
RS-232 insertion from the
Ethernet port to individual
or all MTP outputs, and
switchable video pre-peaking
on all outputs.
Dynamic Skew Equalization
Dynamic skew equalization on
all inputs and outputs
ensures that CAT 5-type
cable skew is eliminated,
regardless of the
combination of input/output
cable lengths selected. This
feature enables the
necessary skew compensation
to be configured during
installation for each
input/output combination.
These configurations are
then stored in memory and
applied automatically during
operation. Since the skew
compensation is in the
matrix switcher, skew
compensation is not required
in the receivers.
RS-232 Insertion From
Ethernet Port to All MTP
Outputs
RS-232 via the Ethernet port
allows direct insertion of
bidirectional serial control
to individual or multiple
MTP outputs.This feature
simplifies control since a
single communication port
can control multiple remote
displays. It also reduces
cabling, installation time
and cost, and control system
RS-232 communication port
requirements.
EDID Minder�
The MTPX Plus 6400 Series
features EDID Minder�, a
selectable feature that
enables automatic and
continuous management of the
EDID information between the
local input sources and the
local displays. EDID Minder�
automatically captures and
stores EDID information from
the display. It also can
generate emulated EDID data
to match the native
resolution of the display.
By maintaining continuous
EDID communication with all
local sources, EDID Minder�
ensures that the source
powers up properly and
reliably outputs content to
the display.
Switchable Video
Pre-Peaking on All Outputs
To provide additional
compensation for optimal
performance on the longest
cable runs, the MTPX Plus
6400 Series offers
switchable video pre-peaking
on all outputs. This ensures
the highest quality signal
at the display.
Local High Resolution
Video Inputs and Output
Local high resolution video
inputs and outputs enable
direct connection of
equipment located in the
same rack as the switcher,
greatly reducing system
complexity by eliminating
the need for additional
transmitters and receivers.
The result is significant
cost savings on rack space,
equipment, cabling, and
power requirements.
Hot Swappable and
Redundant Power Supplies
The MTPX Plus 6400 Series is
designed for optimum
performance and reliability
in mission-critical
applications requiring
continuous operation 24
hours a day, 7 days a week.
It is hot swappable so that
the matrix switcher can be
serviced or reconfigured
without powering down the
unit and interrupting all
signal routing. It includes
two AC power inputs for
added power reliability. |
� Available in five
different I/O sizes, from
48x48 to 64x64
� Dynamic skew equalization
� Adjustments are stored in
memory for each input and
output, maintaining RGB
color alignment at all
times.
� RS-232 insertion from the
Ethernet port to individual
or all MTP outputs � Allows
direct insertion of
bidirectional serial control
to multiple or individual
MTP outputs.
� Local RS-232 insertion
ports � RS-232 input ports
eliminate the need for
control system wiring to
remote displays.
� EDID Minder� automatically
manages EDID communication
between connected devices �
EDID Minder ensures that all
sources power up properly
and reliably output content
for display.
� Video level and peaking
compensation � Actively
compensates for input signal
attenuation for various
cable lengths, resulting in
a brighter and sharper
image.
� Local high resolution
video inputs and outputs �
Accept input from local
video sources without the
need for additional
transmitters and receivers.
� Switchable video
pre-peaking on all outputs �
Provides additional
compensation for optimal
performance on the longest
cable runs.
� Compatible with Extron MTP
Series twisted pair products
� Works with all MTP Series
transmitters and receivers,
including the MTP U T A D
Universal Transmitter and
MTP U R Series Universal
Twisted Pair Receivers.
� Local audio output volume
adjustment and muting �
Eliminates the need for
preamplifiers in many AV
systems.
� Hot-swappable primary and
redundant power supplies �
Ensure reliable system
operation and maximizes
system operating time.
� Two AC power inputs � For
added power reliability,
some 24-hour environments
require two separate AC
power sources, one as the
primary source and the
second for redundancy. The
MTPX Plus 6400 Series
provides two AC power inputs
for continuous connection to
both power sources.
� Enhanced QS-FPC� -
QuickSwitch Front Panel
Controller � A separate
button for each input and
output, enables simple,
intuitive operation.
� Front panel configuration
port � For convenient
configuration access after
installation is complete.
� Ethernet monitoring and
control � Enables Web-based
remote management,
monitoring, and control.
� Tri-color, backlit buttons
accept custom window labels
� Clear plastic backlit
buttons can be
custom-labeled for easy
identification. Buttons
illuminate red, green, or
amber, depending on
function, for ease-of-use in
low-light environments.
� Front panel security
lockout � Restricts access
in unsecured environments.
� Local audio inputs and
outputs � Support stereo
audio sources and output
unbalanced line level mono
audio for processing or
distribution.
� Audio input gain and
attenuation � Eliminates
noticeable differences in
volume when switching
between sources.
� View I/O mode � Easily
view which inputs and
outputs are actively
connected.
� Global presets �
Frequently used I/O
configurations may be saved
and recalled either from the
front panel, Ethernet, or
serial control. This
time-saving feature allows
I/O configurations to be set
up and stored in memory for
future use.
� I/O grouping � Allows the
matrix switcher to be
virtually divided into
smaller sub-switchers.
� Rooming � All models can
be programmed to group
selected outputs into
specific "rooms," each with
its own set of unique
presets.
� RS-232 and RS-422 control
port � Enables switcher
control and configuration
via the Extron Windows-based
control program, or
integration into a control
system.
� Rack-mountable metal
enclosure � All MTPX Plus
6400 Series twisted pair
matrix switchers are in a
10U, full rack-width metal
enclosure.
� Includes MTP Signal
Generator, part # 70-729-01
� Used for automatic set-up
of input level/peaking and
skew adjustments to ensure
optimal system performance. |
|
Video |
|
Routing |
|
|
MTPX Plus
4848 |
48 x 48 matrix, 8 x 4
local |
|
MTPX Plus
4864 |
48 x 64 matrix, 8 x 4
local |
|
MTPX Plus
6432 |
64 x 32 matrix, 8 x 4
local |
|
MTPX Plus
6448 |
64 x 48 matrix, 8 x 4
local |
|
MTPX Plus
6464 |
64 x 64 matrix, 8 x 4
local |
|
Gain |
Unity �1 dB |
|
Crosstalk |
-80 dB @ 1 MHz, -70 dB @
10 MHz, -60 dB @ 30 MHz,
-50 dB @ 100 MHz |
|
Switching
speed |
200 ms (max.) |
|
Video input � local |
|
Number/signal
type |
8 analog RGBHV, RGBS,
RGsB, RsGsBs, component
video (bi-level and
tri-level), S-video,
composite video |
|
Connectors |
8 female 15-pin HD |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
levels |
Analog: 0.3 V to 1.45 Vp-p
with no offset at unity
gain |
|
Impedance |
75 ohms �5% |
|
Horizontal
frequency |
15 kHz to 130 kHz |
|
Vertical
frequency |
30 Hz to 150 Hz |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset (max.
allowable) |
250 mV |
|
Video input � main (see
transmitters' output
specifications) |
|
Number/signal
type |
48 or 64 proprietary
analog signals |
|
Connectors |
48 or 64 female RJ-45
connectors |
|
Video output � local |
|
Number/signal
type |
4 analog RGBHV, RGBS,
RGsB, RsGsBs, component
video (bi-level and
tri-level sync),
S-video, composite video |
|
Connectors |
4 female 15-pin HD |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Impedance |
75 ohms �10% |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset |
≤40 mV with input at 0
offset |
|
Video output � main (see
receivers' input
specifications) |
|
Number/signal
type |
32, 48, or 64
proprietary analog
signals |
|
Connectors |
32, 48, or 64 female
RJ-45 connectors |
|
Sync � local inputs and
outputs only |
|
Input type |
RGBHV, RGBS, RGsB,
RsGsBs |
|
Output type |
See receiver
specifications (on Web
site). |
|
Standards |
NTSC 3.58, NTSC 4.43,
PAL, SECAM |
|
Input level |
2.5 V to 5.5 VDC |
|
Output level |
See receiver
specifications (on Web
site). |
|
Input
impedance |
611 ohms �5% |
|
Output
impedance |
75 ohms �20 ohms |
|
Max. output
voltage |
≤4 VDC with a 2k ohm
load |
|
Max.
propagation delay |
60 ns |
|
Max. rise/fall
time |
4 ns |
|
Polarity |
Positive or negative
(selectable) |
|
Audio |
|
Routing |
|
|
MTPX Plus
4848 |
48 x 48 mono matrix, 8 x
8 local |
|
MTPX Plus
4864 |
48 x 64 mono matrix, 8 x
8 local |
|
MTPX Plus
6432 |
64 x 32 mono matrix, 8 x
8 local |
|
MTPX Plus
6448 |
64 x 48 mono matrix, 8 x
8 local |
|
MTPX Plus
6464 |
64 x 64 mono matrix, 8 x
8 local |
|
Gain |
Unity: 0 dB �2 dB with a
600 ohm load, single
ended |
|
Frequency
response |
20 Hz to 20 kHz, �1 dB |
|
THD + Noise |
=0.05% @ 1 kHz at
nominal level |
|
S/N |
>90 dB at 20 Hz to 20
kHz |
|
CMRR |
>80 dB @ 20 Hz to 20 kHz |
|
Audio input � local |
|
Number/signal
type |
8 stereo,
balanced/unbalanced |
|
Connectors |
(8) 3.5 mm captive screw
connectors, 5 pole |
|
Impedance |
>10k ohms
balanced/unbalanced, DC
coupled |
|
Nominal level |
+4 dBu (1.23 Vrms) |
|
Maximum level |
>+18 dBu,
(balanced/unbalanced) at
1% THD+N |
|
NOTE |
0 dBu = 0.775
Vrms, 0 dBV = 1
Vrms, 0 dBV ≈ 2
dBu
|
|
|
Audio input � main (see
transmitters' output
specifications) |
|
Number/signal
type |
48 or 64 proprietary
analog signals |
|
Connectors |
48 or 64 female RJ-45
connectors |
|
Audio output � local |
|
Number/signal
type |
8 dual mono,
balanced/unbalanced |
|
Connectors |
(8) 3.5 mm captive screw
connectors, 5 pole |
|
Impedance |
50 ohms unbalanced, 100
ohms balanced �10% |
|
Gain error |
�1 dB channel to channel |
|
Maximum level
(=10k ohms) |
>+16 dBu, balanced or
unbalanced at 1% THD+N |
|
Maximum level
(600 ohm) |
>+20 dBm, balanced or
unbalanced at 1% THD+N |
|
Audio output � main (see
receivers' input
specifications) |
|
Number/signal
type |
32, 48, or 64
proprietary analog
signals |
|
Connectors |
32, 48, or 64 female
RJ-45 connectors |
|
Control/remote �
switcher host control
|
|
Serial host
control port |
1 bidirectional RS-232
or RS-422, rear panel
9-pin female D connector |
|
Baud rate and
protocol |
9600 (default), 19200,
38400, 115200 baud,
adjustable; 8 data bits,
1 stop bit, no parity |
|
Serial control pin
configurations |
|
9-pin female
D connector |
|
|
RS-232 |
2 = Tx, 3 = Rx, 5 = GND |
|
RS-422 |
2 = Tx-, 3 = Rx-, 5 =
GND, 7 = Rx+, 8 = Tx+ |
|
USB control
ports |
1 front panel female
mini USB B |
|
USB standards |
USB 2.0, USB 1.1, USB
1.0 compatible |
|
USB data rates |
Low speed (1.5 Mbps),
full speed (12 Mbps),
high speed (480 Mbps) |
|
Ethernet
control port |
1 RJ-45 female |
|
Ethernet data
rate (for network
communication) |
10/100Base-T, half/full
duplex with autodetect |
|
Ethernet
protocol |
ARP, ICMP (ping), IP,
TCP, DHCP, HTTP, SMTP,
Telnet |
|
Ethernet
default settings |
Link speed and duplex
level = autodetected
IP address =
192.168.254.254
Subnet mask =
255.255.0.0
Default gateway =
0.0.0.0
DHCP = off |
|
Web server |
Up to 200 simultaneous
sessions
3.0 MB nonvolatile user
memory |
|
Program
control |
Extron
control/configuration
program for Windows�
Extron Simple
Instruction Set (SIS�)
Microsoft�
Internet Explorer�
ver. 6 or higher, Telnet |
|
Control/remote �
external device
(pass-through,
unidirectional, or
bidirectional) |
|
Serial control
ports |
16 RS-232, 3.5 mm
captive screw
connectors, 3 pole |
|
Baud rate and
protocol |
Up to 38400 baud, 9600
baud (default); 5-8 data
bits; 1 or 2 stop bits;
odd, even, or no parity;
XON, XOFF, or no flow
control |
|
NOTE |
Protocol is
mirrored between
the switcher and
the receiver.
|
|
|
Serial control
pin configurations |
1 = Tx, 2 = Rx, 3 = GND |
|
Control/remote � RS-232
insertion from Ethernet
port |
|
Serial control
ports |
UART, uni- or
bi-directional, on
female RJ-45 connectors
shared with twisted pair
output |
|
6464, 4864
models |
64 ports |
|
6448, 4848
models |
48 ports |
|
6432 model |
32 ports |
|
Baud rate and
protocol |
Up to 38400 baud, 9600
baud (default); 5-8 data
bits; 1 or 2 stop bits;
odd, even, or no parity;
XON, XOFF, or no flow
control |
|
General |
|
Recommended
cable type |
Shielded or unshielded
CAT 5/5e/6/7 or Extron
Enhanced Skew-Free�
A/V UTP |
|
Power |
2 or 4*, 100 VAC to 240
VAC, 50-60 Hz; internal
power supplies, 400
watts each
*A redundant power
supply is standard. |
|
6464 model |
420 watts at 115 VAC, 60
Hz
410 watts at 240 VAC, 50
Hz |
|
Temperature/humidity |
Storage: -40 to +158 �F
(-40 to +70 �C) / 10% to
90%, noncondensing
Operating: +32 to +122
�F (0 to +50 �C) / 10%
to 90%, noncondensing |
|
Cooling |
Fan, right to left (as
viewed from the front
panel) |
|
Thermal
dissipation |
|
|
6464 model |
|
|
115 VAC,
60 Hz |
1433.0 BTU/hr |
|
240 VAC,
50 Hz |
1398.9 BTU/hr |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
Enclosure
dimensions |
17.5" H x 17.0" W x
16.2" D (10U high, full
rack wide)
(44.5 cm H x 43.2 cm W x
41.1 cm D)
(Depth excludes
connectors and handles.) |
|
Product weight |
70 lbs (31.8 kg) |
|
Shipping
weight |
80 lbs (37 kg) |
|
DIM weight,
international |
89 lbs (41 kg) |
|
Vibration |
ISTA 1A in carton
(International Safe
Transit Association) |
|
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A,
ICES, VCCI Class A |
|
Environmental |
Complies with the
appropriate requirements
of RoHS, WEEE. |
|
Warranty |
3 years parts and labor |
|
| |
|
|
| |
|
|
