|
Extron MTPX Plus 816 8x16 MTP Twisted Pair Matrix Switcher for RGBHV,
Video, Audio, and RS-232 |
Product Code:
MTPXPLUS816
 |
The Extron MTPX Plus 816
Twisted Pair Matrix Switcher
represents the next
generation of twisted pair
integration. Local video and
audio inputs and outputs
enable direct connection of
equipment that is located
within the same rack as the
MTPX Plus 816 matrix,
greatly reducing system
complexity by eliminating
additional MTP transmitters
and receivers. The MTPX Plus
816 also provides dynamic
skew equalization on all
inputs and outputs. This
industry first innovation
ensures that MTP cable skew
is eliminate0000000000000d
�no matter which combination
of input/output cable
lengths are selected. Yet
another innovative feature,
local RS-232 insertion
ports, allows a control
system located near the MTPX
Plus to connect to and
control remote displays over
the same MTP output cable
that carries the AV signal.
When paired with Extron MTP
U R Series Universal
Receivers, MTPX Plus Series
Twisted Pair Matrix
Switchers allow composite
video, S-video, and VGA,
along with audio or RS-232
control signals, to be sent
over a single CAT 5-type
cable and output on the
appropriate connector at the
display. Using one cable for
all signal types simplifies
system wiring and uses only
a single matrix switcher
output and MTP U R Series
receiver per display.
Additional features include
switchable pre-peaking on
eight of the MTP outputs to
drive signals long
distances, audio input gain
and attenuation to balance
audio levels, output volume
control for the local
outputs, and IP Link
Ethernet connectivity. The
powerful feature set in the
MTPX Plus 816 Twisted Pair
Matrix Switcher enables
integrators to greatly
reduce installation time and
costs associated with rack
space, cabling, and
installation, when compared
to traditional twisted pair
matrix switching. |
� Dynamic skew equalization
� Adjustments are stored in
memory for each input and
output, maintaining RGB
color alignment at all
times.
� Local RS-232 insertion
ports � RS-232 input ports
eliminate the need for
control system wiring to
remote displays.
� Video level and peaking
compensation � Actively
compensates for input signal
attenuation for various
cable lengths, resulting in
a brighter and sharper
image.
� Switchable video
pre-peaking on 50% of the
outputs � Provides
additional compensation for
optimal performance on the
longest cable runs.
� Local high resolution
video inputs and outputs �
Accept input from local
video sources without the
need for additional
transmitters and receivers.
� Local audio inputs and
outputs � Support stereo
audio sources and output
unbalanced line level mono
audio for processing, or
distribution.
� Audio input gain and
attenuation � Eliminates
noticeable differences in
volume when switching
between sources.
� Local audio output volume
adjustment and muting �
Eliminates the need for
preamplifiers in many AV
systems.
� Ethernet monitoring and
control � Enables Web-based
remote management,
monitoring, and control.
� Enhanced QS-FPC� -
QuickSwitch Front Panel
Controller � A separate
button for each input and
output, enables simple,
intuitive operation.
� Tri-color, backlit buttons
accept custom window labels
� Clear plastic backlit
buttons can be
custom-labeled for easy
identification. Buttons
illuminate red, green, or
amber, depending on
function, for ease-of-use in
low-light environments.
� Compatible with Extron MTP
products � Works with all
MTP Series transmitters and
receivers, including the MTP
U R Series Universal Twisted
Pair Receivers.
� Front panel security
lockout � Restricts access
in unsecured environments.
� View I/O mode � Easily
view which inputs and
outputs are actively
connected
� Global presets � Allow you
to set up I/O configurations
and store them in memory for
future use.
� I/O grouping � Allows the
matrix switcher to be
virtually divided into
smaller sub-switchers.
� Rooming � All models can
be programmed to group
selected outputs into
specific "rooms," each with
its own set of unique
presets.
� RS-232 and RS-422 control
port � Enables switcher
control and configuration
via the Extron Windows-based
control program, or
integration into a control
system.
� Front panel configuration
port � For convenient
configuration access after
installation is complete.
� Rack-mountable metal
enclosure � All MTPX Plus
Series twisted pair matrix
switchers are housed in
either 2U or 3U, full
rack-width metal enclosures.
� Highly reliable,
energy-efficient internal
universal power supply � The
100-240 VAC, 50/60 Hz,
international power supply
provides worldwide power
compatibility with high
demonstrated reliability.
� Includes MTP Signal
Generator, 70-729-01 � Used
for automatic set-up of
level and peaking to ensure
optimal system performance |
|
Video |
|
Routing |
|
|
MTPX Plus
816 |
8 x 16 matrix, 3 x 1
local |
|
MTPX Plus
128 |
12 x 8 matrix, 4 x 2
local |
|
MTPX Plus
168 |
16 x 8 matrix, 3 x 1
local |
|
MTPX Plus
1616 |
16 x 16 matrix, 3 x 1
local |
|
MTPX Plus
1632 |
16 x 32 matrix, 6 x 2
local |
|
MTPX Plus
3216 |
32 x 16 matrix, 6 x 2
local |
|
MTPX Plus
3232 |
32 x 32 matrix, 6 x 2
local |
|
Gain |
Unity �1 dB |
|
Crosstalk |
|
|
128 models |
-76 dB @ 1 MHz, -55 dB @
10 MHz, -45 dB @ 30 MHz,
-30 dB @ 100 MHz |
|
816, 168,
1616 models |
-80 dB @ 1 MHz, -71 dB @
5 MHz, -55 dB @ 10 MHz,
-45 dB @ 30 MHz, -37 dB
@ 100 MHz |
|
1632, 3216,
3232 models |
-90 dB @ 1 MHz, -76 @ 5
MHz, -72 dB @ 10 MHz,
-60 dB @ 30 MHz, -50 dB
@ 100 MHz |
|
Switching
speed |
200 ms (max.) |
|
Video input � local |
|
Number/signal
type |
3, 4, or 6 analog RGBHV,
RGBS, RGsB, RsGsBs,
component video
(bi-level and
tri-level), S-video,
composite video |
|
Connectors |
3, 4, or 6 female 15-pin
HD |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Impedance |
75 ohms �5% |
|
Horizontal
frequency |
15 kHz to 130 kHz |
|
Vertical
frequency |
30 Hz to 150 Hz |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset (max.
allowable) |
250 mV |
|
Video input � main (see
transmitters' output
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Video output � local |
|
Number/signal
type |
1 or 2 analog RGBHV,
RGBS, RGsB, RsGsBs,
component video
(bi-level and tri-level
sync), S-video,
composite video |
|
Connectors |
1 or 2 female 15-pin HD |
|
Nominal level |
0.7 Vp-p for RGB |
|
Impedance |
75 ohms �10% |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset |
<�40 mV with input at 0
offset |
|
Video output � main (see
receivers' input
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Sync � local inputs and
outputs only |
|
Input type |
RGBHV, RGBS, RGsB,
RsGsBs |
|
Output type |
See receiver
specifications (on Web
site). |
|
Standards |
NTSC 3.58, NTSC 4.43,
PAL, SECAM |
|
Input level |
3.5 V to 5.0 Vp-p, DC |
|
Output level |
See receiver
specifications (on Web
site). |
|
Input
impedance |
611 ohms �5% |
|
Output
impedance |
105 ohms �30 ohms |
|
Max. output
voltage |
≤4.0 VDC with a 2k ohm
load |
|
Max. rise/fall
time |
4 ns |
|
Polarity |
Positive or negative |
|
Audio |
|
Routing |
|
|
MTPX Plus
816 |
8 x 16 mono matrix, 3 x
4 local |
|
MTPX Plus
128 |
12 x 8 mono matrix, 4 x
2 local |
|
MTPX Plus
168 |
16 x 8 mono matrix, 3 x
4 local |
|
MTPX Plus
1616 |
16 x 16 mono matrix, 3 x
4 local |
|
MTPX Plus
1632 |
16 x 32 mono matrix, 6 x
8 local |
|
MTPX Plus
3216 |
32 x 16 mono matrix, 6 x
8 local |
|
MTPX Plus
3232 |
32 x 32 mono matrix, 6 x
8 local |
|
Gain (local
inputs and outputs) |
Unbalanced output: 0 dB
�2 dB with a 600 ohm
load, single ended
Balanced output: +6 dB
�2 dB with a 600 ohm
load, single ended |
|
Frequency
response |
20 Hz to 20 kHz, �1 dB |
|
THD + Noise |
≤0.15% @ 1 kHz at
nominal level |
|
S/N |
>70 dB at maximum output
(unweighted) |
|
CMRR |
>43 dB @ 20 Hz to 20 kHz |
|
|
|
Audio input � local |
|
Number/signal
type |
3, 4, or 6 stereo,
balanced/unbalanced |
|
Connectors |
(3, 4, or 6) 3.5 mm
captive screw
connectors, 5 pole |
|
Impedance |
>10k ohms unbalanced |
|
Nominal level |
+4 dBu (1.23 Vrms), -10
dBV (316 mVrms) |
|
Maximum level |
+18 dBu, (unbalanced) at
1% THD+N |
|
NOTE |
0 dBu = 0.775
Vrms, 0 dBV = 1
Vrms, 0 dBV ≈ 2
dBu
|
|
|
Audio input � main (see
transmitters' output
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Audio output � local |
|
Number/signal
type |
2, 4, or 8 dual mono,
balanced/unbalanced |
|
Connectors |
(2, 4, or 8) 3.5 mm
captive screw
connectors, 5 pole |
|
Impedance |
50 ohms unbalanced, 100
ohms balanced �10% |
|
Gain error |
�2 dB channel to channel |
|
Maximum level
(=10k ohms) |
+16 dBu, balanced or
unbalanced at 1% THD+N |
|
Maximum level
(600 ohm) |
+15 dBm, balanced or
unbalanced at 1% THD+N |
|
Audio output � main (see
receivers' input
specifications) |
|
Number/signal
type |
8, 16, or 32 proprietary
analog signals |
|
Connectors |
8, 16, or 32 (depending
on configuration) female
RJ-45 connectors |
|
Control/remote �
switcher host control
|
|
Serial host
control ports |
|
|
MTPX Plus
128 |
1 RS-232, rear panel 3.5
mm captive screw
connector, 3 pole |
|
All other
models |
1 RS-232 or RS-422, rear
panel female 9-pin D
connector
1 RS-232 front panel 2.5
mm mini stereo jack |
|
Baud rate and
protocol |
9600 baud (default),
19200, 38400, and 115200
(adjustable); 8 data
bits; 1 stop bit; no
parity |
|
Serial control pin
configurations |
|
9-pin female
D connector |
RS-232: 2 = Tx, 3 = Rx,
5 = GND
RS-422: 2 = Tx-, 3 =
Rx-, 5 = GND, 7 = Rx+, 8
= Tx+ |
|
Mini stereo
jack |
Tip = Tx, ring = Rx,
sleeve = GND |
|
Captive
screw connector |
RS-232: 1 = Tx, 2 = Rx,
3 = GND |
|
USB control
ports |
|
|
MTPX Plus
128 |
1 front panel female
mini USB B |
|
USB standards |
|
|
MTPX Plus
128 |
USB 2.0, low speed |
|
Ethernet
control port |
1 RJ-45 female connector |
|
Ethernet data
rate |
10/100Base-T, half/full
duplex with autodetect |
|
Ethernet
protocol |
ARP, ICMP (ping), IP,
TCP, UDP, DHCP, HTTP,
SMTP, Telnet |
|
Default
settings |
Link speed and duplex
level = autodetected
IP address =
192.168.254.254
Subnet mask =
255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
|
Web server |
Up to 200 simultaneous
sessions
16 MB nonvolatile user
memory |
|
Program
control |
Extron
control/configuration
program for Windows�
Extron Simple
Instruction Set�
(SIS�)
Microsoft�
Internet Explorer�
version 6 or higher,
Telnet |
|
Control/remote �
external device
(pass-through,
unidirectional, or
bidirectional) |
|
Serial control
ports |
RS-232, 3.5 mm captive
screw connectors, 3 pole |
|
3232 and
1632 models |
16 connectors |
|
3216, 1616,
128, and 816 models |
8 connectors |
|
168 models |
4 connectors |
|
Baud rate and
protocol |
Up to 38400 baud, 9600
baud (default); 5-8 data
bits; 1 or 2 stop bits;
odd, even, or no parity;
XON, XOFF, or no flow
control |
|
NOTE |
Protocol is
mirrored between
the switcher and
the receiver.
|
|
|
Serial control
pin configurations |
1 = Tx, 2 = Rx, 3 = GND |
|
General |
|
Recommended
cable type |
Shielded or unshielded
CAT 5/5e/6/7 or Extron
Enhanced Skew-Free�
A/V UTP |
|
Power |
100 VAC to 240 VAC,
50-60 Hz, internal |
|
1632, 3216,
3232 models |
220 watts |
|
816, 168,
1616 models |
120 watts |
|
128 model |
73 watts |
|
Temperature/humidity |
Storage: -40 to +158 �F
(-40 to +70 �C) / 10% to
90%, noncondensing
Operating: +32 to +122
�F (0 to +50 �C) / 10%
to 90%, noncondensing |
|
Cooling |
Fan, left to right (as
viewed from the front
panel) |
|
Thermal
dissipation |
|
|
128 model |
|
|
115 VAC,
60 Hz |
231.1 BTU/hr |
|
240 VAC,
50 Hz |
223.8 BTU/hr |
|
1616 model |
|
|
115 VAC,
60 Hz |
348.3 BTU/hr |
|
240 VAC,
50 Hz |
353.0 BTU/hr |
|
3232 model |
|
|
115 VAC,
60 Hz |
607.1 BTU/hr |
|
240 VAC,
50 Hz |
595.3 BTU/hr |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
Enclosure
dimensions |
Depth excludes
connectors, width
excludes rack ears. |
|
1632, 3216,
3232 models |
5.25" H x 17.0" W x 9.4"
D (3U high, full rack
wide)
(13.3 cm H x 43.1 cm W x
23.9 cm D) |
|
816, 168,
1616 models |
3.5" H x 17.0" W x 9.4"
D (2U high, full rack
wide)
(8.9 cm H x 43.1 cm W x
23.9 cm D) |
|
128 model |
1.7" H x 17.4" W x 12.0"
D (1U high, full rack
wide)
(4.3 cm H x 44.2 cm W x
30.5 cm D) |
|
Product weight |
|
|
1632, 3216,
3232 models |
16.0 lbs (7.3 kg) |
|
816, 168,
1616 models |
8.5 lbs (3.9 kg) |
|
128 model |
3.7 lbs (1.6 kg) |
|
Shipping
weight |
|
|
1632, 3216,
3232 models |
26 lbs (ll.8 kg) |
|
816, 168,
1616 models |
18 lbs (9 kg) |
|
128 model |
7 lbs (4 kg) |
|
DIM weight
(International) |
|
|
1632, 3216,
3232 models |
26 lbs (11.8 kg) |
|
816, 168,
1616 models |
18 lbs (9 kg) |
|
128 model |
7 lbs (4 kg) |
|
Vibration |
ISTA 1A in carton
(International Safe
Transit Association) |
|
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A,
ICES, VCCI Class A |
|
Environmental |
Complies with the
appropriate requirements
of WEEE. |
|
Warranty |
3 years parts and labor |
|
| |
|
|
| |
|
|
