|
Video |
|
Routing |
3 x 2 matrix |
|
Gain |
Unity |
|
Bandwidth |
300 MHz (-3 dB), fully loaded
0 - 10 MHz: No more than +0.1 dB to -0.1 dB
0 - 130 MHz: No more than +2 dB to -0.1 dB |
|
Crosstalk |
-55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz |
|
Switching speed |
200 ns (max.) |
|
Video input — MMX 32 VGA A, MMX 32 VGA MTP
transmitter |
|
Number/signal type |
3 RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync),
S-video, or composite video |
|
Connectors |
3 female 15-pin HD |
|
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
Analog: -0.5 V to 2.0 Vp-p with no offset at unity gain |
|
Impedance |
75 ohms |
|
Horizontal frequency |
15 kHz to 145 kHz |
|
Vertical frequency |
30 Hz to 170 Hz |
|
Return loss |
<-42 dB @ 5 MHz |
|
DC offset (max. allowable) |
4.0 V |
|
Video output — MMX 32 VGA A, MMX 32 VGA MTP
receivers |
|
Number/signal type |
2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level
sync), S-video, or composite video |
|
Connectors |
|
MMX 32 VGA A |
1 female 15-pin HD
5 female BNC |
|
MMX 32 VGA MTP receivers |
1 female 15-pin HD
1 female RJ-45 (for proprietary analog signals to be received by MTP R
15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ) |
|
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
0.3 V to 2.0 Vp-p |
|
Impedance |
75 ohms |
|
Return loss |
<-30 dB @ 5 MHz |
|
DC offset |
|
MMX 32 VGA A |
±5 mV maximum with input at 0 offset |
|
MMX 32 VGA MTP receivers |
<±20 mV with input at 0 offset |
|
Sync |
|
Input type |
RGBHV, RGBS, RGsB, RsGsBs |
|
Output type |
RGBHV, RGBS, RGsB |
|
Input level |
TTL: 2.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
|
Output level |
TTL: 4 V to 5 Vp-p, unterminated |
|
Input impedance |
510 ohms |
|
Output impedance |
75 ohms |
|
Max. input voltage |
5 Vp-p |
|
Max. propagation delay |
30 ns |
|
Max. rise/fall time |
4.2 ns |
|
Polarity |
|
MMX 32 VGA A |
Positive or negative (follows input) |
|
MMX 32 VGA MTP receivers |
Positive or negative (selectable at receiver) |
|
Audio |
|
Routing |
3 x 2 stereo matrix |
|
Gain |
|
MMX 32 VGA A |
|
Output 1 |
Unbalanced output: 0 dB |
|
Output 2 |
Unbalanced output: 0 dB; balanced output: +6 dB |
|
MMX 32 VGA MTP |
|
Output 1 (local output) |
Unbalanced output: 0 dB |
|
Output 2a (CAT 5 receiver) |
Unbalanced output: +0 dB; balanced output: +6 dB |
|
Output 2b |
Unbalanced output: +0 dB; balanced output: +6 dB |
|
Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
|
THD + Noise |
|
MMX 32 VGA A |
0.03% @ 1 kHz, 0.3% @ 20 kHz nominal level |
|
MMX 32 VGA MTP |
0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
|
S/N |
>90 dB at maximum output (unweighted) |
|
Crosstalk |
|
MMX 32 VGA A |
<-80 dB @ 1 kHz, fully loaded |
|
MMX 32 VGA MTP |
<-76 dB @ 1 kHz, fully loaded |
|
Stereo channel separation |
|
MMX 32 VGA A |
>-90 dB @ 1 kHz |
|
MMX 32 VGA MTP |
>-76 dB @ 1 kHz |
|
CMRR |
>-75 dB @ 20 Hz to 20 kHz |
|
Audio input — MMX 32 VGA A, MMX 32 VGA MTP
transmitter |
|
Number/signal type |
3 stereo, PC level, unbalanced |
|
Connectors |
(3) 3.5 mm mini stereo jacks |
|
Impedance |
|
MMX 32 VGA A |
25k ohms balanced/unbalanced, DC coupled |
|
MMX 32 VGA MTP transmitter |
>3k ohms, balanced/unbalanced AC coupled |
|
Nominal level |
-10 dBV (316 mVrms) |
|
Maximum level |
+8.5 dBu, (unbalanced) at 1%THD+N |
| NOTE |
0
dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — MMX 32 VGA A, MMX 32 VGA MTP
receivers |
|
Number/signal type |
|
MMX 32 VGA A |
2 stereo, balanced/unbalanced |
|
MMX 32 VGA MTP receivers |
2 stereo, balanced/unbalanced, PC level
1 summed stereo-to-mono on RJ-45 |
|
Connectors |
|
MMX 32 VGA A |
(1) 3.5 mm mini stereo audio jack (unbalanced)
(1) 3.5 mm captive screw connector, 5 pole |
|
MMX 32 VGA MTP receivers |
(1) 3.5 mm mini-stereo audio jack (unbalanced)
(1) 3.5 mm captive screw connector, 5 pole
(1) RJ-45 |
|
Impedance |
50 ohms unbalanced, 100 ohms balanced |
|
Gain error |
±0.1 dB channel to channel |
|
Maximum level (Hi-Z) |
|
MMX 32 VGA A |
Program audio: >+21 dBu, balanced or unbalanced at 1% THD+N |
|
MMX 32 VGA MTP receivers, output
2 |
>+17 dBu, balanced or unbalanced at 1% THD+N |
|
Maximum level (600 ohm) |
|
MMX 32 VGA A |
Program audio: >+14 dBm, balanced or unbalanced at 1% THD+N |
|
MMX 32 VGA MTP receivers, output
2 |
>+14 dBm, balanced or unbalanced at 1% THD+N |
|
Control/remote — switcher |
|
Serial control port |
|
MMX 32 VGA A |
RS-232, female 9-pin D connector |
|
MMX 32 VGA MTP |
RS-232, 3.5 mm captive screw connector, 3 pole |
|
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
|
Serial control pin configurations |
|
MMX 32 VGA A |
2 = TX, 3 = RX, 5 = GND |
|
MMX 32 VGA MTP |
1 = TX, 2 = RX, 3 = GND |
|
Contact closure |
|
MMX 32 VGA A |
1 female 9-pin D connector (also used as the serial control port) |
|
MMX 32 VGA MTP |
(2) 3.5 mm captive screw connectors, 5 pole |
|
Contact closure pin configurations |
|
MMX 32 VGA A |
Output 1: 1= input 1, 4 = input 2, 6 = input 3, 5 = GND
Output 2: 7= input 1, 8 = input 2, 9 = input 3, 5 = GND |
|
MMX 32 VGA MTP |
Output 1: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
Output 2: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC |
|
Program control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
|
General |
|
External power supply |
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
|
Power input requirements |
12 VDC, 0.7 A |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Mounting |
|
Rack mount |
Yes, with optional 1U rack shelf |
|
Furniture mount |
Yes, with optional under-desk mounting kit |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
|
MMX 32 VGA A |
1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.) |
|
MMX 32 VGA MTP |
1.75" H x 8.75" W x 6.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 15.24 cm D
(Depth excludes connectors.) |
|
Product weight |
|
MMX 32 VGA A |
2.5 lbs (1.1 kg) |
|
MMX 32 VGA MTP |
2.5 lbs (1.1 kg) (The twisted pair receiver is sold and shipped
separately.) |
|
Shipping weight |
5 lbs (2.3 kg) per MMX 32 VGA A or per MMX 32 VGA MTP transmitter |
|
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
|
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Warranty |
3 years parts and labor |
