|
Extron DTP CrossPoint 84 IPCP 8x4 Scaling Presentation
Matrix Switchers with DTP Extension |
Product Code: DTPCP84IPCP
 |
Extron Matrix Switchers
<
Scaling Matrix Switchers
<
System Switchers |
| The Extron DTP CrossPoint®
84 is a 4K, 8x4 matrix switcher with HDMI and DTP twisted pair
inputs and outputs, scaling, an integrated audio power amplifier,
comprehensive audio DSP, and a built-in IPCP Pro 350 control
processor. The DTP CrossPoint 84 provides complete system
integration in a 2U enclosure, for applications with multiple
displays, sound reinforcement, and AV system control. It supports
local and remote sources and displays with six HDMI inputs and two
DTP inputs, plus two HDMI outputs and two DTP outputs. DTP
extension allows connection to DTP endpoints, plus XTP® matrix
switchers. Each DTP output also includes independent scaling up to
1080p and 2K. Full audio optimization is available with an
integrated Extron ProDSP™ audio digital signal processor,
which can be linked to an additional Extron DSP for AEC and I/O
expansion. |
• IAll-in-one
8x4 4K matrix switcher, scaler, audio DSP, audio power amplifier,
and control processor — The DTP CrossPoint 84 delivers all of
the core functionality of a conventional AV system. Advanced
technological capabilities from Extron allow complete system design
and integration from a single 2U device.
• Inputs: Six HDMI, two DTP twisted pair inputs on RJ-45, six
stereo balanced/unbalanced audio inputs on captive screw, four
mic/line audio inputs on captive screw
• Outputs: Two HDMI; two DTP twisted pair outputs on RJ-45;
one S/PDIF digital audio output on coaxial RCA; four variable audio
outputs on captive screw; speaker outputs on 5 mm, 4-pole captive
screw connector - DTP CrossPoint® 84 IPCP SA or on 5 mm,
2-pole captive screw connector - DTP CrossPoint 84 IPCP MA 70
• Two DTP inputs and six HDMI inputs
• Two HDMI outputs and two independently scaled DTP
outputs
• Integrated DTP inputs and outputs support transmission of
video, control, and audio up to 330 feet (100 meters) over a
shielded CATx cable — Two DTP inputs and two DTP outputs
support digital signal transmission of HDMI or DVI plus control and
analog audio up to 330 feet (100 meters) over a shielded CATx
cable, providing high reliability and maximum performance on an
easily installed cable infrastructure.
• Supports 4K signals at all inputs and on both HDMI outputs
— Incoming 4K signals are supported at all HDMI and DTP
inputs, and can be passed only to the HDMI outputs.
• Selectable scaled DTP output rates from 640x480 to
1920x1200, including HDTV 1080p/60 and 2K — The output rate
can be individually selected for each of the two scaled DTP
outputs. Available output rates include computer video up to
1920x1200, HDTV rates up to 1080p/60, and 2K.
• Compatible with DTP 230 Series and DTP 330 Series, plus
XTP® CrossPoint matrix switchers — Enables mixing and
matching with desktop and wallplate transmitters and receivers, as
well as other DTP-enabled products. The DTP CrossPoint 84 IPCP can
also be integrated with an XTP CrossPoint matrix switcher to
provide connectivity between presentation spaces and a larger,
facility-wide system.
• DTP outputs are compatible with HDBaseT-enabled devices
— The DTP outputs can be configured to send video and
embedded audio, plus bidirectional RS-232 and IR signals to
HDBaseT-enabled displays.
• Compatible with CATx shielded twisted pair cable —
The DTP CrossPoint 84 fully supports a maximum transmission
distance of 330 feet (100 meters) for all compatible resolutions
when used with CATx shielded twisted pair cable. Shielded twisted
pair cabling with solid center conductor sizes of 24 AWG or better
is recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly
recommended for optimal performance
• Remote powering of DTP transmitters and receivers —
The DTP CrossPoint 84 can provide power to two DTP transmitters and
two DTP receivers over the twisted pair connections, eliminating
the need for separate power supplies at the remote units.
• RS-232 insertion from the Ethernet control ports —
System level device control to all remote locations via the matrix
switcher's Ethernet ports, providing comprehensive control of
endpoints and attached devices without needing additional
equipment.
• Bidirectional RS-232 and IR insertion for AV device control
— Bidirectional RS-232 control and IR signals can be
transmitted alongside the video signal over DTP connections,
allowing the remote device to be controlled without the need for
additional cabling. Bidirectional control insertion eliminates the
need for control system wiring to remote devices.
• Integrated IPCP Pro 350 control processor — Built-in
IPCP Pro 350 control processor for complete AV system control.
• Supports TouchLink® Pro touchpanels
• Supports secure industry standard communications protocols
— Uses industry standard communication protocols, including
HTTP (insecure), HTTPS, SSH, SFTP, SMTP, NTP, Discovery Service,
DHCP, DNS, ICMP, and IPv4.
• Supports LinkLicense™ — Enables the use of
third party devices as primary control interfaces.
• Two bidirectional RS-232 ports with software handshaking
— Captive screw serial ports that can control two RS-232
devices.
• One bidirectional RS-232/RS-422/RS-485 port with hardware
and software handshaking — Captive screw serial port that can
communicate with one RS-232/RS-422/RS-485 serially controlled
device.
• Two IR/Serial ports for one-way control of external
devices
• Four Digital I/O ports — Allows for interfacing with
other systems in the room.
• Four relays for controlling room functions — Enables
control of lighting, screen settings, and other device
functions.
• Ethernet monitoring and control — Manage, monitor,
and control AV devices using a standard Ethernet network.
• Integrated three port network switch — Allows for
easy connection of touchpanels or other network controlled
devices.
• Supports 10/100/1000Base-T
• Supports Ethernet-controllable devices — Allows for
control of multiple Ethernet-enabled AV devices such as displays,
switchers, and sources.
• Automatic clock synchronization allows touchpanel to
display the accurate time and date
• Supports control system synchronization —
Synchronization will allow users to retain and recover the state of
their configured endpoints in case of network or power failure.
• Front panel port status indicators
• Multi-level password protection — Allows security to
be set based on user roles.
• Fully customizable using Extron control system software
— GUI Designer can be combined with Global
Configurator™ Plus or Global Configurator Professional.
• Controller groups — Allows multiple IP Link Pro
control processors to be grouped together to function as one when
configured with Global Configurator Professional.
• Library of enhanced Extron Certified device drivers —
Device drivers allow Extron products to control various display and
source devices, such as projectors, flat-panel displays, and
Blu-ray players. Extron has produced fully tested Ethernet, serial,
and IR device drivers.
• HDMI audio embedding — Two-channel audio signals can
be embedded onto the HDMI and DTP outputs.
• HDMI audio de-embedding — Embedded HDMI two-channel
PCM audio can be extracted for routing and further processing.
Embedded multi-channel bitstream formats are routed with the video
to the HDMI and DTP outputs.
• Output volume control — The DTP CrossPoint 84
provides master volume control for the variable line level and
amplified audio outputs, as well as a separate control for mic
volume.
• Audio input gain and attenuation — Gain or
attenuation can be adjusted for each two-channel audio input to
eliminate noticeable differences when switching between
sources.
• Audio breakaway — Provides the capability to break
two-channel audio away from its corresponding video signal and
route to the audio outputs, allowing the audio and video signals
from one source to be switched to different destinations.
• S/PDIF audio output — The DTP CrossPoint 84 includes
an S/PDIF output for two-channel PCM audio or encoded bitstream
audio for Dolby® or DTS® multi-channel surround
sound.
• Integrated audio digital signal processor with
ProDSP™ 32/64-bit processing — The DTP CrossPoint 84
features 32/64-bit floating point audio DSP processing, which
maintains very wide dynamic range and audio signal transparency, to
simplify management of gain staging while reducing the possibility
of DSP signal clipping.
• Digital audio expansion port provides interfacing to an
Extron DMP 128 processor for AEC and audio system scalability
— An expansion port allows the DTP CrossPoint 84 and any DMP
128 model to be linked together via a single shielded CAT 6 cable
for an 8x16 I/O channel transport between devices. This allows for
audio system scalability with expanded audio processing and signal
routing capabilities.
• Four mic/line inputs with 48 volt phantom power —
Four mic or line level audio sources can be independently mixed
with program audio. Selectable 48 volt phantom power allows the use
of condenser microphones.
• Mic ducking — Automatically reduces program audio
when a microphone or other incoming audio signal is detected,
replacing the need for a separate audio ducking processor.
• Studio grade 24-bit/48 kHz analog-to-digital and
digital-to-analog converters — Professional converters fully
preserve the integrity of the original audio signal.
• Fixed, low latency DSP processing — Input to output
latency is a constant 4.5 ms within the DTP CrossPoint 84,
regardless of the number of active channels or processes. Fixed,
low latency processing keeps audio in sync with video, and prevents
distractions to the presenter resulting from delayed live
audio.
• DSP Configurator™ Software — A powerful yet
user-friendly PC-based software tool for managing all audio
operations of the DTP CrossPoint 84. It enables complete setup and
configuration of digital audio processing tools on the ProDSP
platform, as well as routing and mixing.
• Group masters — The DTP CrossPoint 84 provides the
capability to consolidate gain or mute control throughout the
system. Gain or mute controls can be selected and added to a group
master, which can then be controlled by a single master fader or
mute control. Up to 32 group masters can be created.
• Soft limits provide optimal group master adjustment range
— The group master volume range can be limited using soft
limits to maintain optimal minimum and maximum levels when using
external volume control. This prevents operators from over or
under-adjusting levels when using Ethernet, USB, or RS-232 control.
The DSP Configurator Software provides quick drag-and-drop
adjustment of soft limits from the Group Controls screen.
• 32 DSP Configurator presets — Using the DSP
Configurator Software, any or all parameters for DSP processing,
levels, AV matrix switching ties, and audio matrix mixing can be
saved as presets.
• Flexible matrix design provides output, virtual, and
expansion routing options — The DSP architecture of the DTP
CrossPoint 84 employs an intuitive matrix design that offers
substantial flexibility in routing, mixing, and processing audio
input sources. An output matrix allows any of the four microphone
inputs to be matrix mixed to any or all of the four stereo outputs
of the AV switcher block. If desired, any of the microphone inputs
or AV switcher outputs can first be directed into a virtual matrix,
which routes the inputs to eight virtual buses, before being mixed
back into the output matrix. Virtual buses allow inputs to be
processed together as a group. The expansion matrix provides signal
routing between the DTP CrossPoint 84 and a DMP 128 processor
linked via the expansion port.
• Building Blocks processor settings — A collection of
pre-designed processor settings optimized for a specific type of
input or output device, such as microphones and Extron speakers,
with preset levels, filters, dynamics, and more. Flexible Building
Blocks are available on each I/O strip and allow system designers
to fully customize and save their own Building Blocks, further
streamlining audio system design and integration.
• Energy efficient Class D stereo or mono amplifier:
2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
1 x 100 watts @ 70 volts — The DTP CrossPoint 84 offers a
stereo power amplifier with 50 watts per channel into 4 ohms and 25
watts per channel into 8 ohms, or a mono 70 volt power amplifier
with 100 watts rms output. The integrated amplifier features an
Extron exclusive, highly efficient, advanced Class D amplifier
design with CDRS - Class D Ripple Suppression, an Extron patented
technology that provides a smooth, clean audio waveform and an
improvement in signal fidelity over conventional Class D amplifier
designs. CDRS eliminates the high frequency switching ripple
characteristic of Class D amplifiers, a source of RF emissions
which can interfere with sensitive AV equipment such as wireless
microphones.
• Supported HDMI specification features include data rates up
to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio
formats
• HDCP compliant — Fully supports HDCP-encrypted
sources, with selectable authorization for unencrypted content.
• Key Minder® continuously verifies HDCP compliance for
quick, reliable switching — Key Minder authenticates and
maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single
source signal to one or more displays.
• EDID Minder® automatically manages EDID communication
between connected devices — EDID Minder ensures that all
sources power up properly and reliably output content for
display.
• SpeedSwitch® Technology provides exceptional switching
speed for HDCP-encrypted content
• HDCP authentication and signal presence confirmation
— Provides real-time verification of HDCP status for each
digital video input and output. This allows for simple, quick, and
easy signal and HDCP verification through RS-232, USB, or Ethernet,
providing valuable feedback to a system operator or helpdesk
support staff.
• HDCP Visual Confirmation provides a green signal when
encrypted content is sent to a non-compliant display — A
full-screen green signal is sent when HDCP-encrypted content is
transmitted to a non-HDCP compliant display, providing immediate
visual confirmation that protected content cannot be viewed on the
display.
• HDMI to DVI Interface Format Correction —
Automatically enables or disables embedded audio and InfoFrames,
and sets the correct color space for proper connection to HDMI and
DVI displays.
• QS-FPC™ - QuickSwitch Front Panel Controller with
tri-color backlit buttons — Provides a discrete button for
each input and output, allowing for simple, intuitive operation.
Buttons can be custom labeled for easy identification. The buttons
illuminate red, green, or amber depending on function, for ease of
use in low-light environments.
• View I/O mode — Users can easily view which inputs
and outputs are actively connected.
• Global presets — Frequently used I/O configurations
may be recalled either from the QuickSwitch Front Panel Controller,
Ethernet, USB, or RS-232 serial control.
• Output muting control — Provides the capability to
mute one or all outputs at any time. This allows, for example,
content to be viewed on a local monitor prior to appearing on the
main presentation display.
• Aspect ratio control — For the scaled DTP outputs,
the aspect ratio of the video can be controlled by selecting a FILL
mode, which provides a full screen output, or a FOLLOW mode, which
preserves the original aspect ratio of the input signal.
• Auto Input Memory — When activated for the scaled DTP
outputs, the unit automatically stores size, position, and picture
settings based on the incoming signal. When the same signal is
detected again, these image settings are automatically recalled
from memory.
• Output Standby Mode — The unit can be set to
automatically mute video and sync output to the display device when
no active input signal is detected. This allows the projector or
flat-panel display to automatically enter into standby mode to save
energy and enhance lamp or panel life.
• Picture controls for brightness, contrast, color, tint,
detail, as well as horizontal and vertical positioning, and sizing
– DTP outputs
• User presets — Memory presets are available for each
input to store and recall optimized image settings.
• Internal video test patterns for calibration and setup
— The unit offers several video test patterns for the scaled
DTP outputs, to facilitate proper system setup and calibration of
display devices.
• Automatic cable equalization for each HDMI input to 100
feet (30 m) when used with Extron HDMI/DVI Pro cables — Cable
input equalization optimizes signal performance for all HDMI
signals, helping to ensure pristine image quality throughout DTP
Systems.
• Automatic HDMI output reclocking — Reshapes and
restores timing of digital video signals at each HDMI output,
eliminating high frequency jitter to ensure reliable transmission
over long cables.
• Provides +5 VDC, 250 mA power on each HDMI output for
powering external peripheral devices — Power provided via an
HDMI output eliminates the need of a separate power supply for the
connected peripheral device.
• Front panel security lockout — Prevents unauthorized
use in non-secure environments. In lockout mode, a special button
combination is required to operate the matrix switcher from the
front panel controller.
• Ethernet monitoring and control — Enables control and
proactive monitoring over a LAN, WAN, or the Internet.
• Built-in Web pages — Enables the use of a standard
browser for device monitoring and troubleshooting over an intuitive
Web interface.
• RS-232 control port — Enables the use of serial
commands for integration into a control system. Extron products use
the SIS™ - Simple Instruction Set command protocol, a set of
basic ASCII commands that allow for quick and easy programming.
• Front panel USB configuration port — Enables easy
configuration without having to access the rear panel.
• RJ-45 signal and link LED indicators for DTP ports —
Provides a means for validating signal flow and operation, allowing
quick identification of connectivity issues.
• Easy setup and commissioning with Extron's PCS - Product
Configuration Software — Conveniently configure multiple
products using a single software application.
• Rack-mountable 2U, full rack width metal enclosure
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient internal universal power
supply — The 100-240 VAC, 50/60 Hz, international power
supply provides worldwide power compatibility with high
demonstrated reliability.
|
| Video |
|
Routing |
8 x 4 matrix |
|
Maximum data
rate |
10.2 Gbps (3.4 Gbps per
color) |
|
Maximum pixel
clock |
300 Mhz |
|
Resolution |
1920x1200 or 1080p @ 60 Hz; 8, 10,
or 12 bit color depth
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30
Hz |
|
Formats |
RGB and YCbCr digital
video |
|
Standards |
DVI 1.0, HDMI, HDCP 1.1,
CEA-861E |
| Video input |
|
Number/signal
type |
6 HDMI digital video (HDCP
compliant)
2 DTP or XTP (configurable) |
|
Connectors |
6 female HDMI type A
2 female RJ-45 |
| Matrix video outputs (non
scaled) |
|
Number/signal
type |
2 HDMI digital video (HDCP
compliant) |
|
Connectors |
2 female HDMI |
| Scaled TP outputs |
|
Number/signal
type |
2 DTP, XTP, or HDBaseT
(configurable) |
|
Connectors |
2 female RJ-45 |
|
Video
processing |
|
Digital
pixel data bit depth |
8, 10, or 12 bits per channel; 165
MHz pixel clock (HDMI) |
|
Colors |
1.07 billion (10-bit
processing) |
|
Video
input |
|
Horizontal
frequency |
15 kHz to 100 kHz |
|
Vertical
frequency |
24 Hz to 75 Hz |
|
Resolution
range |
640x480 to 1600x1200 and 1920x1200*
480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K
*reduced blanking |
|
Scaled
resolutions |
640x4808,
800x6008, 852x4808, 1024x7688,
1024x8528, 1024x10248,1280x7688,
1280x8008, 1280x10248, 1360x7658,
1360x7688, 1365x7688, 1366x7688,
1365x10248, 1400x10508, 1440x9008,
1600x9008, 1600x12008, 1680x10508,
1920x12008
HDTV 480p7,8,
576p6, 720p3,4,5,6,7,8,
1080i6,7,8, 1080p1,2,3,4,5,6,7,8,
2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz,
3 = at 25 Hz,4 = at 29.97 Hz,
5 = at 30 Hz, 6 = at 50 Hz,
7 = at 59.94 Hz, 8 = at
60 Hz
|
| Shielded twisted pair
interconnection |
|
Connectors |
Female RJ-45 |
|
Termination
standard |
TIA/EIA T568B |
|
Signal transmission
distance |
|
Resolutions
up to 1080p |
|
DTP
330 |
Up to 330' (100 m) using shielded
twisted pair cable or XTP DTP 24 TP cable |
|
DTP
230 |
Up to 230' (70 m) using shielded
twisted pair cable or XTP DTP 24 TP cable |
|
4K @ 30
Hz |
|
DTP
330 |
Up to 330' (100 m) using shielded
twisted pair cable or XTP DTP 24 TP cable |
|
DTP
230 |
Up to 130' (40 m) using shielded
twisted pair cable or XTP DTP 24 TP cable |
|
Cable
requirements |
Solid conductor, 24 AWG or
better |
|
Cable
recommendations |
400 MHz bandwidth, STP (shielded
twisted pair) |
| NOTE |
Extron XTP DTP 24 shielded twisted pair
cable is strongly recommended for optimal
performance. |
|
| NOTE |
Input and output mode signaling:
DTP:
HDMI with embedded audio, analog audio, RS-232 and IR,
and remote power
XTP:
HDMI with embedded audio plus RS-232 and
IR
HDBT: HDMI with
embedded audio plus RS-232 and IR |
|
| Audio system (mic/line input to line
output) |
|
Gain |
Unbalanced output: -6 dB; balanced
output: 0 dB |
|
Frequency
response |
20 Hz to 20 kHz, ±0.2
dB |
|
Input
impedance |
>10k ohms unbalanced, >20k
ohms balanced |
|
THD +
Noise |
0.01% at 1 kHz nominal
level |
|
S/N |
>105 dB at maximum balanced
output (unweighted) |
|
Crosstalk |
<-90 dB @ 20 Hz to 20 kHz, fully
loaded |
|
Stereo channel
separation |
>80 dB @ 20 Hz to 20
kHz |
|
Digital
conversion |
24-bit, 48 kHz |
| Audio |
|
Routing |
8 x 4 stereo switching matrix
4 x 4 microphone mixing matrix |
|
Supported formats —
Pass through |
|
HDMI
connectors |
LPCM up to 7.1/24-bit/192kHz, Dolby
TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1,
Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio,
DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital
Surround 5.1, DTS 2 Channel |
|
Analog
conectors |
Analog stereo audio |
|
DTP
connectors |
De-embedded from HDMI [PCM only] or
remote balanced/unbalanced analog |
| Audio input |
|
Number/signal
type |
6 stereo, analog line level,
balanced or unbalanced
6 stereo, de-embedded from HDMI (PCM only)
2 DTP (de-embedded from HDMI [PCM only] and remote
balanced/unbalanced analog), or XTP (embedded
digital) |
|
Connectors |
(6) 3.5 mm captive screw connectors,
5 pole for analog line level inputs
6 female HDMI type A
2 female RJ-45 |
|
Analog
audio |
|
Nominal
level |
+4 dBu, -10 dBV adjustable via input
gain |
|
Maximum
level |
+21 dBu balanced, +15 dBu
unbalanced |
|
Input
gain adjustment |
-18 dB to +24 dB, 0.1 dB steps,
adjustable per input |
| NOTE |
Unbalanced analog inputs at a DTP Tx input have
+12 dB of gain applied to bring the signal to a nominal level for
balanced operation. |
|
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈
2 dBu |
|
| Mic/line input |
|
Number/signal
type |
4 mono, mic/line,
balanced/unbalanced (with phantom power) |
|
Connectors |
(4) 3.5 mm captive screw connectors,
3 pole |
|
Impedance |
10k ohms unbalanced, 20k ohms
balanced |
|
Nominal
level |
-60 dBV, +4 dBu, -10 dBV, adjustable
via input gain |
|
Maximum
level |
>+21 dBu at rated THD+N when mic
gain is set to 0 dB |
|
Equivalent input
noise |
<-120 dBV (1.0 µVrms)
at +40 dB input gain |
|
CMRR |
>70 dB typical |
|
Input gain
adjustment |
-18 dB to +80 dB, in 0.1 dB steps,
adjustable per input |
|
Microphone volume
range |
-100 dB to +12 dB |
|
DC phantom
power |
+48 VDC, ±10% (inputs 1-4)
switched on or off |
| Audio output |
|
Number/signal
type |
2 HDMI embedded
2 DTP (embedded digital and remote balanced/unbalanced
analog), XTP (embedded digital), or HDBaseT (embedded
digital)
4 stereo balanced/unbalanced analog (variable) |
|
Connectors |
2 female HDMI
2 RJ-45
(4) 3.5 mm captive screw, 5 pole |
|
Impedance |
|
Stereo
audio |
50 ohms unbalanced, 100 ohms
balanced |
|
S/PDIF |
75 ohms |
|
Gain
error |
±0.1 dB channel to
channel |
|
Maximum level
(Hi-Z) |
>+21 dBu, balanced or +15 dBu
unbalanced |
|
Output volume
range |
0 to -100 dB in 0.1 dB
steps |
| EXP port |
|
Transmission
type |
Proprietary |
|
Connectors |
1 RJ-45 |
|
Inputs |
8 channels Rx |
|
Outputs |
16 channels Tx |
|
Audio
format |
24 bit, 48 kHz sampling,
uncompressed |
|
EXP
cable |
Shielded CAT 6 up to 10
meters |
| Audio output — power
amplifier |
|
Number/signal
type |
|
|
SA
models |
1 stereo or mono (2 channels
total) |
|
MA
models |
1 mono, 70 V |
|
Connector |
|
| NOTE |
This connector accepts wires of 22 AWG to 12
AWG. |
|
|
SA
models |
(1) 5 mm screw lock captive screw
connector, 4 pole |
|
MA
models |
(1) 5 mm screw lock captive screw
connector, 2 pole |
|
Load
impedance |
|
SA
models |
4 ohms minimum |
|
MA
models |
50 ohms minimum |
|
High pass filter (MA
models) |
80 Hz, 12 dB/octave roll
off |
|
Amplifier
type |
Class D |
|
Output
power |
|
SA
models |
25 watts (rms) per channel, 8 ohms,
1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THD |
|
MA
models |
100 watts (rms) @ 70 V, 1 kHz, 0.1%
THD |
|
Protection |
Clip limiting, thermal, short
circuit, DC output |
|
Frequency
response |
|
SA
models |
20 Hz to 20 kHz, +1/-3 dB @ 1
watt |
|
MA
models |
80 Hz to 20 kHz, +1/-3 dB @ 1
watt |
|
THD +
Noise |
<0.1%, 1 kHz, 3 dB below
clipping |
|
S/N |
>90 dB, 20 Hz to 20 kHz,
unweighted |
| Control/remote — switcher |
|
Serial control
port |
1 bidirectional RS-232, 3.5 mm
captive screw connector, 3 pole (rear panel) |
|
Baud rate and
protocol |
9600 (default) to 115200 baud, 8
data bits, 1 stop bit, no parity (default) |
|
Serial control pin
configuration |
1 = Tx, 2 = Rx, 3 =
Gnd |
|
USB control
port |
1 front panel female USB
mini-B |
|
USB
standards |
USB 2.0, low speed |
|
Ethernet control
port |
1 female RJ-45
connector |
|
Ethernet data
rate |
10/100Base-T, half/full duplex with
autodetect |
|
Ethernet
protocol |
ARP, ICMP (ping), IP, TCP, DHCP,
HTTP, SMTP, Telnet |
|
Ethernet default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off |
|
Web
server |
Up to 200 simultaneous sessions
40.0 MB nonvolatile user memory |
|
Program
control |
Extron control/configuration program
for Windows®
Extron Simple Instruction Set
(SIS™)
Microsoft® Internet Explorer®,
Telnet |
|
| Control/remote — external device
(pass-through, unidirectional or bidirectional) (RS-232/IR over
TP) |
| NOTE |
Protocol is mirrored between the connected
TP endpoints and the "Over TP" ports on the DTP CrossPoint 84.
Signals from a control device pass into each DTP CrossPoint
84 "Over TP" port, are embedded with the TP signal, and sent
to individual TP Tx or Rx endpoints for control of remote sink or
source devices.
The "Over TP" ports are simply pass-through connections to TP
endpoints. There is no IR insertion from any DTP CrossPoint
84 control port to the “Over TP” ports. RS-232 can
be inserted from the Ethernet connection. |
|
|
Serial control
pass-through ports |
|
DTP
CrossPoint 84 input/TP Tx |
RS-232 via (2) 3.5 mm, 5 pole
captive screw connectors (shared with IR ports) |
|
DTP
CrossPoint 84 output/TP Rx |
RS-232 via (2) 3.5 mm, 5 pole
captive screw connectors (shared with IR ports) |
|
Baud
rates |
300 to 115200 baud |
|
Protocol |
8 or 7 data bits
1 or 2 stop bits
no parity (default), even or odd parity |
|
Serial control pin
configuration |
1 = Tx, 2 = Rx, 3 =
Gnd |
|
IR pass-through control
ports |
TTL level (0 to 5 V) modulated
infrared control from 30 kHz up to 60 kHz |
|
DTP
CrossPoint 84 input/TP Tx |
(2) 3.5 mm captive screw connectors,
5 pole (shared with RS-232 ports) |
|
DTP
CrossPoint 84 output/TP Rx |
(2) 3.5 mm captive screw connectors,
5 pole (shared with RS-232 ports) |
|
IR control pin
configuration |
3 = Gnd, 4 = IR Tx, 5 = IR
Rx |
| Control/remote — IPCP Pro 350 control
processor |
|
Memory |
|
|
SDRAM |
512 MB |
|
Flash |
4.5 GB |
|
Software and control
options |
|
Software |
Extron Global Configurator Plus and
Professional for Windows® |
|
Control
options |
GlobalViewer®,
TouchLink® for Web, TouchLink for
iPad®, or TouchLink Pro touchpanels |
|
Ethernet
control |
|
Network
interface controllers (NICs) |
1 |
|
Network
switch |
1 unmanaged 3 port
switch |
|
Connectors |
3 female RJ-45
connectors |
|
Data
rate |
10/100/1000Base-T, half/full duplex
with autodetect |
|
Protocols |
DHCP, DNS, HTTP, HTTPS, ICMP, NTP,
SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP |
|
Default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1 |
|
Serial
control |
|
Quantity/type |
1 bidirectional RS-232, RS-422,
RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3) |
|
Connectors |
(1) 3.5 mm captive screw connector,
5 pole
(2) 3.5 mm captive screw connectors, 3 pole |
|
Baud
rate and protocol |
300 to 115200 baud (9600 baud =
default); 8 (default) or 7 data bits; 1 (default) or 2 stop
bits;
no parity (default), even, odd, mark, or space
parity |
| NOTE |
The 5-pole ports support both hardware and
software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow
control. |
|
|
Pin
configurations, serial, 5-pole captive screw |
|
RS-232
(default) |
Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 =
RTS, 5 = CTS |
|
RS-422 |
Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 =
Tx+, 5 = Rx+ |
|
RS-485 |
Pins 1 and 2 (tied together) =
data-, 3 = Gnd, 4 and 5 (tied together) = data+ |
|
Pin
configurations, serial, 3-pole captive screw
|
Pin 1 = Tx, 2 = Rx, 3 =
Gnd |
|
Digital I/O
control |
|
Quantity/type |
4 digital input/output
(configurable) |
|
Connectors |
(1) 3.5 mm captive screw connector,
5 pole |
|
Digital
inputs |
|
Input
voltage range |
0 to 24 VDC, clamped at +30
VDC |
|
Input
impedance |
29k ohms |
|
Programmable
pullup |
1k ohms to +5 VDC |
|
Threshold
low to high |
>2.8 VDC |
|
Threshold
high to low |
<2.0 VDC |
|
Digital
outputs |
250 mA sink from 24 VDC
max. |
|
Pin
configurations |
1, 2, 3, 4 = digital I/Os 1, 2, 3,
4; 5 = Gnd |
|
IR/serial
control |
|
Quantity/type |
2 programmable: unidirectional
RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and
non-carrier) up to 300 kHz |
|
Connector |
(1) 3.5 mm captive screw connector,
5-pole |
|
Baud
rate and protocol (RS-232) |
300 to 115200 baud (9600 baud =
default); 8 (default) or 7 data bits; 1 (default) or 2 stop
bits;
no parity (default), even, odd, mark, or space
parity |
|
Pin
configurations |
For each port, pin 1 = signal,
2 = Gnd |
|
IR
output carrier frequency |
30 kHz to 300 kHz |
|
Relay
control |
|
Quantity/type |
4 normally open
relays |
|
Relay
control connectors |
(1) 3.5 mm captive screw connector,
6 pole |
|
Relay
control contact rating |
24 VDC, 1 A |
| General |
|
Power
supply |
Internal
Input: 100-240 VAC, 50-60 Hz |
|
Power
consumption |
111 watts |
|
Remote power
capability |
Supports up to four endpoints (two
DTP Tx, two DTP Rx) (remote power not available in XTP and HDBaseT
modes) |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to
+70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
|
Cooling |
Fans, air flows from left to right
(as viewed from front panel) |
|
Thermal
dissipation |
265 BTU/hr |
|
Mounting |
|
Rack
mount |
Yes |
|
Enclosure
type |
Metal |
|
Enclosure
dimensions |
3.5" H x 17.4" W x 15.3" D (2U high,
full rack wide)
(8.9 cm H x 43.2 cm W x 38.9 cm D)
(Depth excludes connectors and knobs. Width excludes rack
ears.) |
|
Product
weight |
11.4 lbs (5.2 kg) |
|
Shipping
weight |
14 lbs (6.0 kg) |
|
DIM
weight |
22 lbs (10 kg) |
|
Vibration |
ISTA 1A in carton (International
Safe Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES,
VCCI |
|
Environmental |
Complies with the appropriate
requirements of RoHS, WEEE. |
|
Warranty |
3 years parts and
labor |
| NOTE |
All nominal levels are at
±10%. |
|
|
| |
|
|
| |
|
l
|
