Extron SMX HDMI Series HDMI Matrix Switchers |
Product Code: SMXHDMI
 |
| The SMX HDMI Series Matrix Switcher Boards are designed for routing HDMI video signals with HDCP - High-bandwidth Digital Content Protection. They support computer video to 1920x1200 and HDTV to 1080p
as well as embedded audio and control signals, and enable the routing of content from Blu-ray Disc players and other content-protected sources to one or more displays. SMX HDMI matrix boards provide +5 VDC, 250 mA of power on
each output for external peripheral devices. They are available in four I/O sizes: 4x4, 4x8, 8x4, and 8x8. |
• Available in 4x4, 4x8, 8x4, and 8x8 I/O sizes
• Supported HDMI specification features include data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, and HD lossless
audio formats
• Supports computer video up to 1920x1200, including HDTV 1080p/60
• HDCP compliant
• SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content
• Key Minder® continuously verifies HDCP compliance for quick, reliable switching — Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching
in professional AV environments, while enabling simultaneous distribution of a single source signal to one or more displays.
• HDCP Visual Confirmation provides a green signal when encrypted content is sent to
a non-compliant display — A full-screen green signal is sent when HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing immediate visual confirmation that protected content cannot be viewed on
the display.
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Supports DDC transmission
— DDC channels are actively buffered, allowing continuous communication between source and display.
• Automatic color bit depth management — The switcher automatically adjusts color bit depth based on the
display EDID, preventing color compatibility conflicts between source and display.
• HDMI to DVI Interface Format Correction — Automatically reformats HDMI source signals for output to a connected DVI display.
• Automatic cable equalization for each input to 100 feet (30 meters) at 1920x1200/8-bit color when used with Extron HDMI Pro cables
• Automatic output reclocking — Reshapes and restores timing of HDMI
signals at each output, enabling transmission over long HDMI cables.
• Provides +5 VDC, 250 mA power on each output for external peripheral devices
• Audio breakaway — Provides the capability to separate
an embedded audio signal from its corresponding video signal within the matrix switcher board, allowing the audio and video signals from one source to be switched to different destinations.
• Includes LockIt® HDMI
cable lacing brackets |
| Video — composite video (SMX 84/88/1616 V) |
| Routing |
| SMX 84 V |
8 x 4 matrix |
| SMX 88 V |
8 x 8 matrix |
| SMX 1616 V |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-60 dB @ 5 MHz |
| Switching speed |
100 ms (max.) |
| Video input — composite video (SMX 84/88/1616 V) |
| Number/signal type |
8 or 16 composite video, S/PDIF digital audio (not reclocked) |
| Connectors |
8 or 16 female BNC |
| Nominal level |
1 Vp-p for composite video |
| Minimum/maximum levels |
Analog: 0.1 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
| Video output — composite video (SMX 84/88/1616 V) |
| Number/signal type |
4, 8, or 16 composite video, S/PDIF digital audio (not reclocked) |
| Connectors |
4, 8, or 16 female BNC |
| Nominal level |
1 Vp-p for composite video |
| Minimum/maximum levels |
0.1 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Sync — composite video (SMX 84/88/1616 V) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Routing |
| SMX 84 SV/YC |
8 x 4 matrix |
| SMX 88 SV/YC |
8 x 8 matrix |
| SMX 1616 SV/YC |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-60 dB @ 5 MHz |
| Switching speed |
100 ms (max.) |
| Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Number/signal type |
8 or 16 S-video, composite video |
| Connectors |
| SMX 84/88/1616 SV |
8 or 16 female 4-pin mini DIN |
| SMX 84/88/1616 YC |
8 or 16 x 2 female BNC |
| Nominal level |
1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.1 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
| Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Number/signal type |
4, 8, or 16 S-video, composite video |
| Connectors |
| SMX 84/88/1616 SV |
4, 8, or 16 female 4-pin mini DIN |
| SMX 84/88/1616 YC |
4, 8, or 16 x 2 female BNC |
| Nominal level |
1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.1 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Video — wideband (SMX 84/88/1616 WB) |
| Routing |
| SMX 84 WB |
8 x 4 matrix |
| SMX 88 WB |
8 x 8 matrix |
| SMX 1616 WB |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
400 MHz (-3 dB), fully loaded |
| Crosstalk |
| 8x8 |
-82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz |
| 16x16 |
-74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz |
| Switching speed |
200 ms (max.) |
| Video input — wideband (SMX 84/88/1616 WB) |
| Number/signal type |
8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked) |
| Connectors |
8 or 16 female BNC |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
| Video output — wideband (SMX 84/88/1616 WB) |
| Number/signal type |
4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked) |
| Connectors |
4, 8, or 16 female BNC |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Switching type |
Triple-Action |
| Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC |
| Input type |
| SMX 88 SYNC, SMX 1616 SYNC |
Composite sync (S) |
| SMX 88 H+V |
Separate H and V sync |
| Output type (follows input) |
| SMX 88 SYNC, SMX 1616 SYNC |
Composite sync (S) |
| SMX 88 H+V |
Separate H and V sync |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Max. propagation delay |
35 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
| Video — VGA (SMX 84/88/1616 VGA) |
| Routing |
| SMX 84 VGA |
8 x 4 matrix |
| SMX 88 VGA |
8 x 8 matrix |
| SMX 1616 VGA |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
350 MHz (-3 dB), fully loaded |
| Crosstalk |
| 8x8 |
-82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz |
| 16x16 |
-74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz |
| Switching speed |
200 ms (max.) |
| Video input — VGA (SMX 84/88/1616 VGA) |
| Number/signal type |
8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors |
8 or 16 female 15-pin HD |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-36 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
| Video output — VGA (SMX 84/88/1616 VGA) |
| Number/signal type |
4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors |
4, 8, or 16 female 15-pin HD |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-36 dB @ 5 MHz |
| DC offset |
±6 mV with input at 0 offset |
| Switching type |
Triple-Action |
| Sync — VGA (SMX 84/88/1616 VGA) |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Max. propagation delay |
40 ns |
| Max. rise/fall time |
18 ns |
| Polarity |
Positive or negative (follows input) |
| Digital video — SMX 44/84/88/1616 SDI |
| Routing |
| SMX 44 HD SDI |
4 x 4 matrix |
| SMX 84 HD SDI |
8 x 4 matrix |
| SMX 88 HD SDI |
8 x 8 matrix |
| SMX 1616 HD SDI |
16 x 16 matrix |
| Gain |
Unity |
| Maximum data rate |
2.97 Gbps |
| Data types |
8 or 10 bit |
| Operation standards |
SMPTE 292M, SMPTE 259M, ITU-RBT.601, ITU-RBT.1120 |
| Digital video input — SMX 44/84/88/1616 SDI |
| Number/signal type |
4, 8, or 16 single-link SDI, HD-SDI; or dual-link HD-SDI |
| Connectors |
4, 8, or 16 female BNC |
| Nominal level |
0.80 Vp-p ± 10% |
| Impedance |
75 ohms |
| Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
| Equalization |
Automatic |
| Input cable equalization distance |
| HD-SDI |
| Extron SHR, Belden 1694A cable |
500' (152 m) |
| Extron HR, Belden 1505A cable |
400' (122 m) |
| SDI |
| Extron SHR, Belden 1694A cable |
750' (229 m) |
| Extron HR, Belden 1505A cable |
550' (168 m) |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
|
|
| |
|
l
|
