|
Video |
|
Routing |
|
RGB/VGA |
8
x 6 matrix |
|
S-video/composite video |
6
x 6 matrix |
|
Gain |
Unity |
|
Bandwidth |
|
RGB/VGA |
300 MHz (-3 dB), fully loaded |
|
S-video/composite video |
150 MHz (-3 dB), fully loaded |
|
0 - 10 MHz |
No more than +0.1 dB to -0.1 dB |
|
0 - 30 MHz |
No more than +0.1 dB to -0.5 dB |
|
Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
|
Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
|
Crosstalk |
|
RGB/VGA |
<-50 dB @ 10 MHz, <-30 dB @ 100 MHz |
|
S-video/composite video |
-50 dB @ 5 MHz |
|
Switching speed |
100 ms (max.) |
|
Video input |
|
Number/signal type |
|
RGB/VGA |
8
VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level or
tri-level sync), S-video, or composite video |
|
S-video/composite video |
Up to 4 S-video and 2 composite video
or
6 composite video |
|
Connectors |
|
RGB/VGA |
8
female 15-pin HD |
|
S-video/composite video |
4
x 2 female BNC for S-video or composite video (inputs 11 to 14) and
2 x 1 female BNC for composite video or genlock only (inputs 9 and 10) |
|
Nominal level |
1
Vp-p for Y of S-video and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
|
RGB/VGA |
Analog: 0.3 V to 1.5 Vp-p with no offset |
|
S-video/composite video |
Analog: 0.5 V to 2.0 Vp-p with no offset |
|
Impedance |
75 ohms |
|
Horizontal frequency (RGB) |
15 kHz to 145 kHz |
|
Vertical frequency (RGB) |
30 Hz to 170 Hz |
|
Return loss |
|
RGB/VGA |
<-40 dB @ 5 MHz |
|
S-video/composite video |
<-30 dB @ 5 MHz |
|
DC offset (max. allowable, S-video or
composite video) |
|
|
1.5 V |
|
External sync (genlock, S-video or
composite video) |
|
|
0.3 V to 0.4 Vp-p |
|
Video output |
|
Number/signal type |
|
RGB/VGA |
6
VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, component video (b-level or
tri-level sync), S-video, or composite video (follows input type) |
|
S-video/composite video |
2
S-video, 2 S-video or composite video, and 2 composite video |
|
Connectors |
|
RGB/VGA |
6
female 15-pin HD |
|
S-video/composite video |
2
x 2 female BNC for S-video only (outputs 9 and 10)
2 x 2 female BNC for S-video or composite video pass-through (outputs 11
and 12)
2 x 1 female BNC for composite video only (outputs 7 and 8) |
|
Nominal level |
1
Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
|
RGB/VGA |
Analog: 0.3 V to 1.5 Vp-p with no offset (follows input) |
|
S-video/composite video |
Analog: 0.0 V to 2.0 Vp-p with no offset |
|
Impedance |
75 ohms |
|
Return loss |
|
RGB/VGA |
-40 dB @ 5 MHz |
|
S-video/composite video |
-30 dB @ 5 MHz |
|
DC offset |
|
S-video/composite video |
±5 mV with input at 0 offset |
|
VGA |
±10 mV with input at 0 offset |
|
Switching type |
|
RGB/VGA |
Triple-Action |
|
S-video/composite video |
Vertical interval |
|
Sync |
|
Input type (VGA group) |
RGBHV, RGBS, RGsB, RsGsBs |
|
Output type (VGA group) |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
|
Genlock connector |
1
female BNC (video input 9) |
|
Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
Input level |
1.9 V to 5.0 Vp-p |
|
Output level |
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS |
|
Input impedance |
510 ohms |
|
Output impedance |
75 ohms |
|
Max. input voltage |
5.0 Vp-p |
|
Max. propagation delay |
30 ns |
|
Max. rise/fall time |
4
ns |
|
Polarity |
Positive or negative (follows input) |
|
Audio |
|
Routing |
14 x 6 stereo matrix |
|
Gain |
Unbalanced output: -6 dB; balanced output: 0 dB |
|
Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
|
THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
|
S/N |
>85 dB, balanced, at maximum output (21 dBu) (unweighted) |
|
Crosstalk |
<-120 dB @ 1 kHz, fully loaded |
|
Stereo channel separation |
>80 dB @ 1 kHz |
|
CMRR |
>75 dB @ 20 Hz to 20 kHz |
|
Volume range |
-76 dB to 0 dB (volume numbers 0 to 64 in 1.0 dB steps) |
| NOTE |
Full attenuation is volume level 0, -98 dB. The default is -0
dB, volume level 64. |
|
|
Audio input |
|
Number/signal type |
14 stereo, balanced/unbalanced |
|
Connectors |
(14) 3.5 mm captive screw connectors, 5 pole |
|
Impedance |
>25k ohms unbalanced, 50k ohms balanced, DC coupled |
|
Nominal level |
-10 dBV (316 mVrms) |
|
Maximum level |
+20 dBu, (balanced or unbalanced) at 1% THD+N |
|
Input gain adjustment |
–18 dB to +24 dB, adjustable per input by RS-232, Ethernet, or front
panel |
| NOTE |
0
dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output |
|
Number/signal type |
6
stereo, balanced/unbalanced |
|
Connectors |
(6) 3.5 mm captive screw connectors, 5 pole |
|
Impedance |
50 ohms unbalanced, 100 ohms balanced |
|
Gain error |
±0.1 dB channel to channel |
|
Maximum level (Hi-Z) |
>+20 dBu, balanced or unbalanced at 1% THD+N |
|
Control/remote — switcher |
|
Serial host control port |
(2) RS-232: 2 rear panel 3.5 mm captive screw connectors, 3 pole;
1 front panel 2.5mm stereo mini jack (in parallel with the rear panel
secondary port) |
|
Baud rate and protocol |
9600 baud; 8 data bits, 1 stop bit, no parity |
|
Serial control pin configurations |
Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND |
|
Ethernet host control port |
1
female RJ-45 connector |
|
Ethernet data rate |
10/100Base-T, half/full duplex with autodetect |
|
Ethernet protocol |
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet |
|
Default settings |
Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
|
Web server |
Up to 200 simultaneous sessions
1 MB nonvolatile user memory |
|
Program control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer ver. 6 or higher, Telnet |
|
General |
|
Power |
100 VAC to 240 VAC, 50-60 Hz, 15 watts, internal |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, vents on left and right |
|
Mounting |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
3.5" H x 17.0" W x 9.4" D (2U high, full rack wide)
8.9 cm H x 43.2 cm W x 23.9 cm D
(Depth excludes connectors. Width excludes rack ears.) |
|
Product weight |
15 lbs (6.8 kg) |
|
Shipping weight |
25 lbs (12 kg) |
|
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
|
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
|
Compliances |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Warranty |
3
years parts and labor |
