|
Video — wideband video
BME |
|
Routing |
16 x 8 or larger matrix
up to 32 x 32 or 64 x
64, depending on model
and configuration |
|
Gain |
Unity |
|
Bandwidth |
|
Matrix
Wideband |
430 MHz (-3 dB), fully
loaded |
|
0 - 10
MHz |
No more than +0.1 dB to
-0.1 dB |
|
0 - 130
MHz |
No more than +4 dB to
-0.25 dB |
|
Phase between
I/Os |
<1.28° at 3.58 MHz |
|
Differential
phase error |
0.1%, 3.58 MHz and 4.43
MHz |
|
Differential
gain error |
0.1°, 3.58 MHz and 4.43
MHz |
|
Max.
propagation of delay |
5 ns typical (±1 ns) |
|
Crosstalk |
-80 dB @ 1 MHz, -62 dB @
10 MHz, -52 dB @ 30 MHz |
|
Switching
speed |
200 ns (max.) |
|
Video — low resolution
video BME |
|
Routing |
16 x 8 or larger matrix
up to 32 x 32 or 64 x
64, depending on model
and configuration |
|
Gain |
Unity |
|
Bandwidth |
|
Matrix Low
Res |
150 MHz (-3 dB), fully
loaded
0 MHz to 10 MHz: no more
than +0.1 dB to -0.1 dB
0 MHz to 30 MHz: no more
than +0.5 dB to -0.5 dB |
|
Crosstalk |
80 dB @ 1 MHz, -62 dB @
10 MHz, -52 dB @ 30 MHz |
|
Switching
speed |
200 ns (max.) |
|
Video input — wideband
video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGBHV, RGBS, RGsB,
RsGsBs, component video,
S-video, composite video |
|
Connectors |
Female BNC (quantity
varies with
configuration) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
levels |
Analog: 0.5 V to 1.5
Vp-p with no offset |
|
Impedance |
75 ohms |
|
Return loss |
-30 dB @ 5 MHz |
|
Video input — low
resolution video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGsB, RsGsBs, component
video,
S-video, composite
video, HDTV |
|
Connectors |
Female BNC (quantity
varies with model) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
level |
Analog: 0.5 V to 1.5
Vp-p with no offset |
|
Impedance |
75 ohms |
|
Return loss |
-30 dB @ 5 MHz |
|
External sync
(genlock) |
0.3 V to 12 Vp-p, 75
ohms |
|
Video output — wideband
video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGBHV, RGBS, RGsB,
RsGsBs, component video,
S-video, composite video |
|
Connectors |
Female BNC (quantity
varies with
configuration) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Maximum level |
2 Vp-p |
|
Impedance |
75 ohms |
|
Return loss |
-25 dB to input section
up to 50 MHz |
|
DC offset |
±10 mV typical with
input at 0 offset |
|
Switching type |
Triple-Action™ |
|
Slew rate |
>200 V/ms |
|
Video output — low
resolution video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGsB, RsGsBs, component
video,
S-video, composite
video, HDTV |
|
Connectors |
Female BNC (quantity
varies with
configuration) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
levels |
0.5 V to 1.5 Vp-p |
|
Impedance |
75 ohms |
|
Return loss |
-40 dB to input section
at 3.58 MHz/4.43 MHz |
|
DC offset |
±10 mV maximum with
input at 0 offset |
|
Switching type |
Vertical interval |
|
Slew rate |
>200 V/ms |
|
Sync — sync BME |
|
Input and
output types |
Software configurable
for RGBHV or RGBS |
|
Sync
connectors |
Up to 64 or 32 BNC
female (quantity varies
with configuration) |
|
Input level |
0.5 V to 5 Vp-p (4 Vp-p
nominal) |
|
Output level |
5 Vp-p |
|
Gain |
AGC to TTL : 4.0 V to
5.0 Vp-p |
|
Input
impedance |
Inputs 1 - 16: 510 ohms
or 75 ohms, switchable
Inputs 17 - 64: 510 ohms |
|
Output
impedance |
75 ohms |
|
Horizontal
frequency |
15 kHz to 150 kHz |
|
Vertical
frequency |
30 Hz to 150 Hz |
|
Polarity |
Positive or negative
(follows input) |
|
Audio — audio BME |
|
Routing |
Up to 64 x 64 mono or
stereo matrix (in
increments of 8),
balanced/unbalanced |
|
Gain
(selectable per output) |
Unbalanced output: 0 dB
(as shipped), or -6 dB
(jumper-selectable)
Balanced output: +6 dB
(as shipped), or 0 dB
(jumper-selectable) |
|
Frequency
response |
20 Hz to 20 kHz, ±0.05
dB |
|
THD + Noise |
0.03% @ 20 Hz to 20 kHz,
+15 dBu input, +21 dBu
output nominal level |
|
S/N |
>85 dB, balanced, at
rated maximum output |
|
Crosstalk |
<-70 dB @ 20 Hz to 20
kHz, fully loaded |
|
Stereo channel
separation |
>70 dB @ 20 Hz to 20 kHz |
|
CMRR |
>+75 dB, 20 Hz to 20 kHz |
|
Audio input — audio BME |
|
Number/signal
type |
(8 to 64) (in increments
of 8) mono or stereo,
balanced/unbalanced |
|
Connectors |
(8 to 64) 3.5 mm captive
screw connector, 5 pole
(stereo) or 3 pole
(mono) |
|
Impedance |
>10k ohms
unbalanced/balanced, DC
coupled |
|
Nominal level |
-10 dBV (316 mV) |
|
Maximum level |
+21.5 dBu, (balanced or
unbalanced) at 1%THD+N |
|
Input gain
adjustment |
-15 dB to +9 dB,
adjustable per input via
RS-232 control or front
panel |
|
NOTE |
0 dBu = 0.775
Vrms, 0 dBV = 1
Vrms, 0 dBV ≈ 2
dBu
|
|
|
Audio output — audio BME |
|
Number/signal
type |
Up to 64 (in increments
of 8) mono or stereo,
balanced/unbalanced |
|
Connectors |
3.5 mm captive screw
connectors, 5 pole
(stereo) or 3 pole
(mono) (quantity varies
with configuration) |
|
Impedance |
50 ohms unbalanced, 100
ohms balanced |
|
Gain error |
±0.1 dB channel to
channel |
|
Maximum level
(Hi-Z) |
>+26.0 dBu, balanced at
1%THD+N |
|
Maximum level
(600 ohm) |
>+24.0 dBm, balanced at
1%THD+N |
|
Control/remote —
switcher |
|
Serial control
port |
RS-232 or RS-422, Female
9-pin D connector |
|
Baud rate and
protocol |
9600 baud, 8 data bits,
1 stop bit, no parity |
|
Serial control
pin configurations |
2 = TX, 3 = RX, 5 = GND |
|
System
intercommunications |
2 RJ-11 connectors |
|
Remote key pad
control |
(2) 5 mm, 5-pole captive
screw connectors |
|
Program
control |
Extron
control/configuration
program for Windows®
Extron Simple
Instruction Set (SIS™) |
|
General |
|
Power* |
100 VAC to 240 VAC,
50-60 Hz; internal
Matrix 6400
wideband............ 110
watts at 115 VAC, 60 Hz
Matrix 3200
wideband............ 50
watts at 115 VAC, 60 Hz
Matrix 6400
video....................
90 watts at 115 VAC, 60
Hz
Matrix 3200
video....................
40 watts at 115 VAC, 60
Hz
Matrix 6400
sync......................
65 watts at 115 VAC, 60
Hz
Matrix 3200
sync......................
35 watts at 115 VAC, 60
Hz
Matrix 6400
audio....................
195 watts at 115 VAC, 60
Hz
*A redundant power
supply is available. |
|
Temperature/humidity |
Storage: -40 to +158 °F
(-40 to +70 °C) / 10% to
90%, noncondensing
Operating: +32 to +122
°F (0 to +50 °C) / 10%
to 90%, noncondensing |
|
Cooling |
Fan, left to right as
viewed from front panel |
|
Mounting |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
5U dimensions |
8.75" H x 17.0" W x
14.1" D (5U high, full
rack wide)
22.2 cm H x 43.2 cm W x
35.8 cm D
(Depth excludes
connectors. Width
excludes rack ears.) |
|
7U dimensions |
12.25" H x 17.0" W x
14.1" D (7U high, full
rack wide)
31.1 cm H x 43.2 cm W x
35.8 cm D
(Depth excludes
connectors. Width
excludes rack ears.) |
|
Shipping/product
weight, rack height |
Matrix 6400 wideband...
42 lbs (20 kg)/29.1 lbs
(13.2 kg), 7U
Matrix 3200 wideband...
30 lbs (14 kg)/22.2 lbs
(10.1 kg), 5U
Matrix 6400
video.......... 33 lbs
(15 kg)/25.3 lbs (11.5
kg), 5U
Matrix 3200
video.......... 30 lbs
(14 kg)/22.4 lbs (10.2
kg), 5U
Matrix 6400
sync........... 44 lbs
(20 kg)/31.4 lbs (14.2
kg), 7U
Matrix 3200
sync........... 29 lbs
(14 kg)/21.0 lbs (9.5
kg), 5U
Matrix 6400
audio......... 38 lbs
(18 kg)/28.4 lbs (12.9
kg), 5U |
|
DIM weight,
international |
44 lbs (20 kg) |
|
Vibration |
ISTA 1A in carton
(International Safe
Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, FCC Class A |
|
Warranty |
3 years parts and labor |
