The CrossPoint Ultra 128 is a 12x8
ultra-wideband matrix switcher designed to deliver exceptional performance in
the most demanding, very high resolution computer-video and stereo audio routing
systems. CrossPoint® Ultra sets a new standard for engineering excellence in all
critical measures of matrix switcher performance, including bandwidth, frequency
response, efficiency, reliability, power consumption, and control. CrossPoint
Ultra is ideal for complex AV routing applications that require efficient,
reliable operation at the highest computer-video resolutions without signal loss
or degradation.
Ultra-wideband performance
High demand applications require high performance signal routing. CrossPoint
Ultra 128 matrix switchers provide a minimum of 600 MHz (-3dB) RGB bandwidth,
fully loaded.
CrossPoint Ultra combines this exceptional, ultra-wideband performance with
Ultra-flat frequency response of ±0.5 dB or less, through the critical portion
of the bandwidth curve, from 0 to 130 MHz. This means that the matrix switcher
is virtually transparent to the AV signal path supporting the most demanding,
high resolution system designs with multiple levels of signal processing.
Ultra-low crosstalk
Crosstalk interference occurs when electrical signals "leak" from one component
or circuit board signal line to another due to improper shielding or isolation.
CrossPoint Ultra matrix switchers are engineered to achieve superb
channel-to-channel isolation of -56 dB or better at 100 MHz. This minimizes
signal leakage across video channels, and eliminates signal bleed-through that
can compromise critical imaging or high-security presentation environments.
Ultra-efficient power supply
Temperature has the highest impact on component life. Efficient enclosure design
and, in particular, the power supply, can drastically cut down on heat
generation and power consumption. CrossPoint Ultra matrix switchers use a
single, highly-efficient, cool-running power supply, allowing the utilization of
a fan-free enclosure. Whether you're considering thermal management in the
equipment rack, or silent operation in a noise-sensitive environment, CrossPoint
Ultra makes an excellent choice.
Ultra-low power consumption
CrossPoint Ultra is engineered for use in high-demand, rack-mount applications
with other AV signal processing devices. Through efficiency of design and the
careful selection of high-quality, long-life electronic components, CrossPoint
Ultra draws less than 40 watts at 120 VAC under full load, less than a standard
desk lamp. Low power consumption equates to less heat generation which
translates to a lower cost of ownership and an increased product lifespan.
Ultra-reliable architecture
CrossPoint Ultra represents Extron's 5th generation of CrossPoint design and
technological development, resulting in new design architecture that yields
higher performance, utilizes fewer boards and cables, and eliminates many of the
most common failure points. The result is optimum reliability around the clock,
year in and year out.
Ultra-flexible control
With so many makes and models of control systems available, you need a matrix
switcher that can work with any or all of them, and one that does not lock your
system design into a single closed, proprietary control protocol. That's why all
CrossPoint Ultra models come standard with front panel, RS-232/422 serial
control, and Ethernet control. The QuickSwitch™ front panel controller is always
available, whether it's for convenient system testing or day-to-day operation
without a control system.
The RS-232/422 serial control port utilizes Extron's popular SIS™ Simple
Instruction Set command protocol, allowing easy integration with virtually any
control system. The standard Ethernet port enables CrossPoint Ultra to be
controlled, monitored, and accessed from most IP-enabled control systems, or
from any authorized computer connected to a Local Area Network, Wide Area
Network, or the Internet. |
•
Inputs: Video on female BNC connectors; audio on
captive screw connectors
• Outputs: Video on female BNC connectors; audio on captive screw connectors
• Ultra-wideband performance - 525 MHz to 600 MHz (-3 dB), depending on model —
CrossPoint Ultra models provide a minimum of 525 MHz (-3 dB) RGB video
bandwidth, fully loaded, with many models providing 600 MHz (-3 dB) or more.
• Ultra-flat frequency response - ±0.5 dB from 0 to 130 MHz — CrossPoint Ultra
provides an ultra-flat frequency response of ±0.5 dB or less, through the
critical portion of the bandwidth curve, from 0 to 130 MHz. This means that the
matrix switcher is virtually transparent to the AV signal path for the most
demanding, high resolution system designs with multiple levels of signal
processing.
• Ultra-low crosstalk – (-56) dB or better at 100 MHz — CrossPoint Ultra is
engineered to achieve superb channel-to-channel isolation of -56 dB or better at
100 MHz.
• Ultra-low power consumption – Less than 40 watts at full load — Draws less
than 40 watts under full load for increased product life with very low cost of
operation.
• RGBHV switching — Switches separate horizontal and vertical sync to ensure
proper sync polarity, providing a more stable image.
• ADSP™ - Advanced Digital Sync Processing technology — An exclusive,
all-digital process that regenerates the sync signal waveform and restores sync
level to 5.0 V p-p, TTL, specifications. This ensures a stable sync signal for
improved signal compatibility with any LCD, DLP, plasma, or other digital
display device.
• DSVP™ - Digital Sync Validation Processing — Verifies active sources by
polling all inputs for valid sync signals. DSVP then transmits the horizontal
and vertical sync information to the user through the serial or Ethernet ports.
• Compatible with RGBHV, RGBS, RGsB, HDTV, component video, S-video, composite
video, and unbalanced/balanced stereo audio — Separate horizontal and vertical
sync ensures proper sync polarity, providing a more stable image.
• Buffered I/O — Each input and output is individually buffered to provide
maximum performance and virtually no crosstalk or signal interference between
channels.
• Triple-Action Switching™ for RGB delay — Blanks the screen when switching to a
new source. The new sync signals precede the RGB signals, so there is no glitch
shown during the transition. The time delay between the RGB and sync signals is
adjustable up to five seconds through front panel, Ethernet, or serial control.
• HVA models switch both balanced and unbalanced stereo audio
• Audio input gain and attenuation — Allows users to set the level of gain or
attenuation for each audio input channel, eliminating noticeable volume
differences when switching between sources.
• Audio output volume adjustment and muting — Can be set dynamically for each
channel through the front panel or serial control, eliminating the need for an
audio preamplifier in many system designs.
• Audio breakaway — Provides the capability to break an audio signal away from
its corresponding video signal, allowing the audio and video signals from one
source to be switched to different destinations.
• Ultra-flexible control — Standard front panel, RS-232, and Ethernet control
simplifies and enhances integration with any control system.
• QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete, backlit
button for each input and output, allowing for simple, intuitive operation.
• Tri-color, backlit buttons — Can be custom labeled for easy identification.
The buttons illuminate red, green, or amber, depending on function, for ease of
use in low-light environments.
• RS-232 and RS-422 control port — Using serial commands, CrossPoint Ultra can
be controlled and configured via the included Windows-based control software, or
integrated into a control system. Extron products use the SIS™ - Simple
Instruction Set command protocol, a set of basic ASCII code commands that allow
for quick and easy programming. The serial port also makes it easy to install
firmware updates.
• Control software — Provides a graphical, drag-and-drop interface for I/O
configuration and other customization functions via RS-232 and RS-422 remote
control. This software also offers an emulation mode for configuration of an
offsite matrix switcher; the I/O configuration may be saved for future
downloading to the matrix switcher.
• Ethernet monitoring and control — Enables CrossPoint Ultra to be proactively
monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP
protocols. Ethernet control provides for remote selection of input and output
ties, adjustment and control of audio input and output levels, and advanced
system diagnostics.
• View I/O mode — Users can easily view which inputs and outputs are actively
connected.
• I/O grouping — Allows the matrix switcher to be virtually divided into smaller
sub-switchers, making installation and control easier. I/O grouping allows
specific outputs, like those designated for a specific video format, to be
grouped together.
• Front panel security lockout — Prevents unauthorized use in non-secure
environments. In lockout mode, a special button combination is required to
operate the switcher from the front panel controller.
• Rooming — All models can be programmed to group selected outputs into specific
"rooms," each with its own set of unique presets. Each room can support up to 16
outputs. A total of 10 rooms, with 10 presets per room, are available.
• Global presets — Frequently used I/O configurations may be saved and recalled
either from the front panel, Ethernet, or serial control. This time-saving
feature allows I/O configurations to be set up and stored in memory for future
use.
• Optional remote controls — Available control panels and keypads provide the
flexibility to control the matrix switcher from a remote location.
• Rack-mountable metal enclosure — CrossPoint Ultra is housed in 19-inch wide
metal enclosure and features integrated rack ears for ease of installation.
• Highly reliable, energy-efficient internal universal power supply — The
100-240 VAC, 50/60 Hz, international power supply provides worldwide power
compatibility with high demonstrated reliability. |
|
Video |
|
Routing |
|
84 Series |
8
x 4 matrix |
|
88 Series |
8
x 8 matrix |
|
128 Series |
12 x 8 matrix |
|
1212 Series |
12 x 12 matrix |
|
168 Series |
16 x 8 matrix |
|
1616 Series |
16 x 16 matrix |
|
Gain |
Unity |
|
Bandwidth |
|
84/88/128 Series |
600 MHz (-3 dB), fully loaded |
|
0 - 10 MHz |
No more than ±0.1 dB |
|
0 - 130 MHz |
No more than ±0.3 dB |
|
1212/168/1616 Series |
525 MHz (-3 dB), fully loaded |
|
0 - 10 MHz |
No more than ±0.30 dB |
|
0 - 130 MHz |
No more than ±0.50 dB |
|
Crosstalk |
|
84/88/128 Series |
-85 dB @ 1 MHz
-73 dB @ 5 MHz
-70 dB @ 10 MHz
-63 dB @ 30 MHz
-56 dB @ 100 MHz |
|
1212/168/1616 Series |
-92 dB @ 1 MHz
-80 dB @ 5 MHz
-78 dB @ 10 MHz
-75 dB @ 30 MHz
-70 dB @ 100 MHz |
|
Switching speed |
200 ns (max.) |
|
Video input |
|
Number/signal type |
8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
composite video |
|
Connectors |
|
84/88 Series |
8
x 5 female BNC |
|
128/1212 Series |
12 x 5 female BNC |
|
168/1616 Series |
16 x 5 female BNC |
|
Nominal level |
1
Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
Analog: 0.2 V to 2.25 Vp-p with no offset |
|
Impedance |
75 ohms |
|
Horizontal frequency |
15 kHz to 150 kHz |
|
Vertical frequency |
30 Hz to 150 Hz |
|
Return loss |
<-40 dB @ 5 MHz |
|
DC offset (max. allowable) |
1.47 V |
|
Video output |
|
Number/signal type |
4, 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video |
|
Connectors |
|
84 Series |
4
x 5 female BNC |
|
88/128/168 Series |
8
x 5 female BNC |
|
1212 Series |
12 x 5 female BNC |
|
1616 Series |
16 x 5 female BNC |
|
Nominal level |
1
Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
0
V to 1.8 Vp-p (follows input) |
|
Impedance |
75 ohms |
|
Return loss |
-40 dB @ 5 MHz |
|
DC offset |
±7 mV with input at 0 offset |
|
Switching type |
Triple-Action™ |
|
Sync |
|
Input type |
RGBHV, RGBS, RGsB, RsGsBs |
|
Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
|
Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
|
Output level |
AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
|
Input impedance |
Inputs 1 to 4: 75 or 510 ohms, switchable
Inputs 5 to 8, 12, or 16: 510 ohms |
|
Output impedance |
75 ohms |
|
Max. input voltage |
5.0 Vp-p |
|
Max. propagation delay |
<120 ns |
|
Max. rise/fall time |
4
ns |
|
Polarity |
Positive or negative (follows input) |
|
Audio — audio models only |
|
Routing |
|
84 Series |
8
x 4 stereo matrix |
|
88 Series |
8
x 8 stereo matrix |
|
128 Series |
12 x 8 stereo matrix |
|
1212 Series |
12 x 12 stereo matrix |
|
168 Series |
16 x 8 stereo matrix |
|
1616 Series |
16 x 16 stereo matrix |
|
Gain |
Unbalanced output: -6 dB; balanced output 0 dB |
|
Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
|
THD + Noise |
0.01% @ 1 kHz at nominal level |
|
S/N |
>105 dB, balanced, at maximum output (21 dBu), unweighted |
|
Crosstalk |
<-89 dB @ 1 kHz, fully loaded |
|
Stereo channel separation |
>-105 dB @ 1 kHz |
|
CMRR |
>-83 dB @ 20 Hz to 20 kHz |
|
Audio input — audio models only |
|
Number/signal type |
8, 12, or 16 stereo, balanced/unbalanced |
|
Connectors |
(8, 12, or 16) 3.5 mm captive screw connectors, 5 pole |
|
Impedance |
>10k ohm, balanced/unbalanced, DC coupled |
|
Nominal level |
+4 dBu (1.228 Vrms) |
|
Maximum level |
+21 dBu, (balanced or unbalanced) at 0.01% THD+N |
|
Input gain adjustment |
-18 dB to +24 dB (default = 0 dB), adjustable per input by RS-232/422,
Ethernet, or front panel |
| NOTE |
0
dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — audio models only |
|
Number/signal type |
4, 8, 12, or 16 stereo, balanced/unbalanced |
|
Connectors |
(4, 8, 12, or 16) 3.5 mm captive screw connectors, 5 pole |
|
Impedance |
50 ohms unbalanced, 100 ohms balanced |
|
Gain error |
±0.1 dB channel to channel |
|
Maximum level (Hi-Z) |
>+21 dBu, balanced or unbalanced at 1.0% THD+N |
|
Maximum level (600 ohm) |
>+20 dBm, balanced or unbalanced at 1.0% THD+N |
|
Output volume range |
0
to 64 (-75.8 dB to 0 dB) in 1 dB increments from steps 1 to 64, in 12 dB
increment from step 0 to 1; default = 64 = 0 dB |
|
Control/remote — switcher |
|
Serial host control port |
1
bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232, front panel 2.5 mm mini stereo jack |
|
Baud rate and protocol |
9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1
stop bit, no parity |
|
Serial control pin configurations |
|
RS-232 |
9-pin D connector: 2 = Tx, 3 = Rx, 5 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND |
|
RS-422 |
9-pin D connector: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ |
|
Ethernet control port |
1
female RJ-45 connector |
|
Ethernet data rate |
10/100Base-T, half/full duplex with autodetect |
|
Ethernet protocol |
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet |
|
Ethernet default settings |
Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off |
|
Web server |
Up to 200 simultaneous sessions
1.24 MB nonvolatile user memory |
|
Program control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set™ (SIS™)
Microsoft® Internet Explorer®, Telnet |
|
General |
|
Power |
100 VAC to 240 VAC, 50-60 Hz, internal |
|
84/88/128 Series |
35 watts (typical)
38 watts (loaded) |
|
1212/168/1616 Series |
45 watts (typical)
52 watts (loaded) |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Mounting |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
Enclosure dimensions (Depth excludes
connectors. Width excludes rack ears.) |
|
84/88/128 Series |
5.25" H x 17.0" W x 9.4" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 23.9 cm D) |
|
1212/168/1616 Series |
10.5" H x 17.0" W x 9.7" D (6U high, full rack wide)
(26.7 cm H x 43.2 cm W x 24.6 cm D) |
|
Product weight |
|
84/88/128 Series |
14.4 lbs (6.5 kg) |
|
1212/168/1616 Series |
19.4 lbs (8.8 kg) |
|
Shipping weight |
|
84/88/128 Series |
21 lbs (10 kg) |
|
1212/168/1616 Series |
26 lbs (12 kg) |
|
DIM weight, international |
|
84/88/128 Series |
25 lbs (12 kg) |
|
1212/168/1616 Series |
34 lbs (15.5 kg) |
|
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
|
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick,
FCC Class A, ICES, VCCI |
| Warranty |
3 years parts
and labor |
|
| |
|
|
