Extron MPS 602
Media Presentation Switcher with DTP Extension

Extron DTP Systems
Home > Extron > DTP Systems > MPS 602
Extron MPS 602 Media Presentation Switcher with DTP Extension
Extron MPS 602
Product Code: MPS602
 Buy Sell Sales Extron IN1608

The Extron MPS 602 is a simple-to-use, six input media presentation switcher for digital and analog sources. It offers digital video switching with three HDMI inputs and one DTP 230 twisted pair input, and analog video switching with two RGB inputs that are digitized for distribution to the digital outputs. For increased flexibility, the MPS 602 includes a DTP 230 twisted pair output and an HDMI output that are switch-selectable. The DTP 230 input and output work in conjunction with DTP 230 transmitters and receivers to extend HDMI, audio, and bidirectional control signals up to 230 feet (70 meters), and each DTP link requires just a single shielded CATx cable. The MPS 602 also includes several audio switching and processing features, available power amplification, plus flexible control options for complete AV switching and distribution.
 
• Integrates HDMI, RGB, and audio sources into presentation systems
• Inputs: Three HDMI, one DTP 230 twisted pair input on RJ-45, two RGB video on 15-pin HD, five stereo balanced/unbalanced audio inputs on captive screw, one mic/line audio input on captive screw
• Outputs: One selectable DTP 230 twisted pair output on RJ-45 or HDMI output, one RGB video on 15-pin HD, one fixed audio output on captive screw, one variable stereo audio output on captive screw, speaker outputs on 5 mm, 4-pole captive screw connector - MPS 602 SA or on 5 mm, 2-pole captive screw connector - MPS 602 MA
• One DTP 230 input, three HDMI inputs, and two RGB inputs — The MPS 602 allows for switching between HDMI and analog video sources.
• Selectable HDMI or DTP 230 output — The input signal can be routed to either the HDMI output or the DTP 230 output.
• Independent RGB input switching — Allows independent switching of RGB inputs to the local RGB output.
• Integrated DTP 230 input and output support transmission of HDMI, control, and analog audio up to 230 feet (70 meters) over a shielded CATx cable — Supports digital signal transmission of HDMI plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable, providing high reliability and maximum performance on an easily installed cable infrastructure.
• Supports computer video up to 1920x1200, including HDTV 1080p/60 and 2K
• Compatible with CATx shielded twisted pair cable — The MPS 602 fully supports a maximum transmission distance of 230 feet (70 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
• Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal over DTP connections, allowing the remote device to be controlled without the need for additional cabling. Bidirectional control extension eliminates the need for control system wiring to remote devices.
• Remote powering of DTP transmitter and receiver — The MPS 602 can provide power to a DTP 230 transmitter and a DTP 230 receiver over the CATx connections, eliminating the need for separate power supplies at the remote units.
• Compatible with all DTP 230 Series models and DTP 230-enabled products — Enables mixing and matching with desktop and wallplate transmitters and receivers, as well as other DTP 230-enabled products to meet application requirements.
• Digital conversion of analog input signals — Analog signals are digitized, ensuring that a reliable, high quality digital video signal is sent to the output destination.
• HDCP compliant — Fully supports HDCP-encrypted sources, with selectable authorization for unencrypted content.
• Supported HDMI specification features include data rates up to 6.75 Gbps, 3D, and HD lossless audio formats
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
• HDMI audio embedding — Analog input audio signals can be embedded onto the HDMI output signal.
• HDMI audio de-embedding — Embedded HDMI two-channel PCM audio can be extracted to the analog outputs.
• Mic/line input with 48 volt phantom power — A mic or line level audio source can be mixed with program audio. Selectable 48 volt phantom power allows the use of condenser microphones.
• Mic ducking — Automatically reduces program audio when a microphone signal is detected, replacing the need for a separate audio ducking processor.
• Audio breakaway — Provides the capability to break an analog audio signal away from its corresponding video signal and route to the audio outputs, allowing the analog audio channels to be operated as a separate switcher.
• Output volume control — The MPS 602 provides volume control and muting for the program and amplified audio outputs, as well as a separate control for mic volume and muting.
• Available with energy efficient Class D stereo or mono amplifier:
2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
1 x 100 watts @ 70 volts — The MPS 602 SA offers a stereo power amplifier with 50 watts per channel into 4 ohms and 25 watts per channel into 8 ohms, while the MPS 602 MA offers a mono 70 volt power amplifier with 100 watts rms output. Both feature an Extron exclusive, highly efficient, advanced Class D amplifier design with CDRS™ - Class D Ripple Suppression, an Extron patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
• Auto-switching between inputs — Auto-switching allows for simple, unmanaged installation in locations such as in a lectern or under a conference table. When multiple inputs are active, the switching priority is configurable.
• Front panel security lockout — This feature locks out either all front panel functions, or mic volume and muting; all functions however, are available through USB or RS-232 control.
• RS-232 control port — Enables the use of serial commands for complete control and configuration via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII commands that allow for quick and easy programming.
• Front panel USB configuration port — Enables easy configuration without having to access the rear panel.
• RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
• Easy setup and commissioning with Extron's PCS - Product Configuration Software — Conveniently configure multiple products using a single software application.
• Rack-mountable 1U, full rack width metal enclosure
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.
 

Video — VGA
   Gain  Unity
   Bandwidth  170 MHz (-3 dB)
   Crosstalk  -50 dB @ 10 MHz, -30 dB @ 100 MHz
Video — HDMI and DTP
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution  1920x1200 @ 60 Hz or 1080p @ 60 Hz, and 2K
   Formats  RGB and YCbCr digital video
   Standards  DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input
   Number/signal type   
      VGA inputs  2 VGA-QXGA, RGBHV, RGBS
      HDMI inputs  3 HDMI (or single link DVI-D, with appropriate DVI-HDMI adapters)
      DTP input  1 DTP 230 input
   Connectors   
      VGA inputs  2 female 15-pin HD
      HDMI inputs  3 female HDMI, type A
      DTP input  1 RJ-45 female
   Nominal level   
      VGA inputs  0.7 Vp-p for RGB
   Minimum/maximum levels   
      VGA inputs  Analog 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 145 kHz
   Vertical frequency  30 Hz to 170 Hz
   Return loss  <-40 dB @ 5 MHz
Video output
   Number/signal type   
      Local VGA output  1 VGA-QXGA RGBHV, RGBS
      HDMI outputs  1 HDMI (or single link DVI-D)
      DTP output  1 DTP 230 output
      DTP signal   
         Transmission distance  up to 230' (70 m) using CAT 5e/6/6a/7 cable or XTP DTP 24 TP cable
         Cable requirements  Solid conductor, 24 AWG or better
         Cable recommendations  400 MHz bandwidth, STP (shielded twisted pair)
       NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
   Connectors   
      Local VGA output  1 female 15-pin HD
      HDMI outputs  1 female HDMI type A
      DTP output  1 RJ-45 jack
    NOTE     Outputs are selectable from either the HDMI output or DTP output. The switcher does not output to both connectors simultaneously. Analog RGB inputs are digitized for output from either the HDMI or DTP output.
   Nominal level   
      VGA outputs  0.7 Vp-p for RGB
   Minimum/maximum levels   
      VGA outputs  Analog, 0.3 V to 1.5 Vp-p
   Impedance  75 ohms
   Return loss (VGA output)  <-40 dB @ 5 MHz
   DC offset (max. allowable, VGA output)  ±5 mV with input at 0 offset
Sync — VGA Inputs Only
   Input type  RGBHV, RGBS
   Local VGA output  RGBHV, RGBS
   Input level  1.9 Vp-p to 5.0 Vp-p
   Output level  TTL: 5.0 Vp-p (unterminated) for RGBHV, RGBS
   Input impedance  510 ohms
   Output impedance  75 ohms
   Max. input voltage  5.0 Vp-p
   Max. propagation delay  30 ns
   Max. rise/fall time  4.2 ns
   Polarity  Positive or negative (follows input)
Audio — individual audio groups (VGA, HDMI)
   Gain  Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, ±0.5 dB
   THD + Noise   
      MPS 602  0.01% @ 1 kHz at nominal level
      MPS 602 SA/MA  <0.1% @ 1 kHz 3 dB below clipping
   S/N   
      MPS 602  >90 dB at maximum output (unweighted)
      MPS 602 SA/MA  >90 dB 20 Hz to 20 kHz, unweighted
   Crosstalk  <-72 dB @ 1 kHz or below, <-45 dB @ 20 kHz
   Stereo channel separation  >80 dB @ 1 kHz
   CMRR  >60 dB @ 1 kHz
Audio input — (VGA, and HDMI video)
   Number/signal type   
      VGA inputs  2 stereo, unbalanced/balanced
      HDMI inputs  3 stereo, unbalanced/unbalanced, or
3 embedded digital audio from HDMI
      DTP input  1 stereo, unbalanced analog,
1 embedded digital audio from DTP
      Embedded digital audio source formats  2-ch PCM
   Connectors   
      VGA inputs  (2) 3.5 mm, 5-pole captive screw connectors
      HDMI inputs  (3) 3.5 mm 5-pole captive screw connectors
3 female HDMI type A
      DTP input  1 female RJ-45 connector
   Input impedance  >10k ohms unbalanced, 20k ohms balanced
   Nominal level  +4 dBu balanced, -10 dBV unbalanced configurable
   Maximum level  +15.2 dBu, balanced, +9.2 dBu unbalanced
   CMRR  >60 dB typical @ 1 kHz
   Input gain adjustment  -18 dB to +24 dB, adjustable per input
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type  2 stereo, balanced/unbalanced (fixed and variable outputs)
1 DTP 230 analog audio and 1 embedded digital audio on DTP signal
1 embedded digital audio on HDMI
   Connector  (2) 3.5 mm captive screw connector, 5-pole
1 RJ-45
1 female HDMI type A
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.5 dB channel to channel
   Nominal level when the main volume is set to default  -2 dBu (632 mVrms) balanced output
   Maximum level  +15.2 dBu balanced, +9.2 dBV unbalanced
   Talk-over (ducking) response time (typical)
      Attack time  Instant
      Release delay  5 seconds
      Release time  1 second
      Ducking level  0 dB to 30 dB, adjustable; default = +6 dB
Audio output — power amplifier
   Number/signal type   
      MPS 602 SA  1 stereo (default) or 2 mono, 2 channels total
      MPS 602 MA  1 mono, 70V line
   Connector   
      MPS 602 SA  (1) 5 mm screw lock captive screw connector, 4-pole
      MPS 602 MA  (1) 5 mm screw lock captive screw connector, 2-pole
   Load impedance   
      MPS 602 SA  4 ohms minimum
      MPS 602 MA  50 ohms minimum
   Output power   
      MPS 602 SA  25 watts rms per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts rms per channel, 4 ohms, 1 kHz, 0.1% THD
      MPS 602 MA  100 watts rms 70V, 1 kHz, 0.1% THD
   THD + Noise  0.1% @ 1 kHz, 3 dB below clipping
   Amplifier type  Class D
Mic/line input
   Number/signal type  1 mono balanced/unbalanced
   Connector  (1) 3.5 mm captive screw connector
   Impedance  10k ohms unbalanced, 20k ohms balanced
   Nominal level  -60 dBV (1 mV), +4 dBu, -10 dBV, adjustable
   Equivalent input noise  <-117 dBV (1.4 uVrms) when gain is set to 40 dB
   Maximum level  +12 dBV (2 Vrms) when gain is set to 0 dB
   CMRR  >60 dB typical @ 1 kHz
   Input gain adjustment  -18 dB to +60 dB, 1 dB steps, adjustable per input
   Microphone volume range  -66 dB to +12 dB
   Microphone DC power  +48 VDC +10% phantom power, can be turned on or off
    NOTE     Mic/Line audio is not embedded on DTP analog audio output or digital embedded audio.
Control/remote — switcher
   Serial control port  1 RS-232, 3.5 mm captive screw connector, 3-pole, rear panel
   Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configuration  2 = Tx, 3 = Rx, 5 = GND
   USB control ports  1 front panel female mini USB B
   USB standards  USB 2.0, high speed
   Program control  Extron Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS)
Control/remote — external device (pass-through, unidirectional or bidirectional)
    NOTE     Protocol is mirrored between the connected DTP 230 endpoints and the "Over DTP" input and output ports. Signals from a control device pass into each "Over DTP" port, are embedded with the DTP signal, and sent to individual DTP 230 Tx or Rx endpoints for control of remote sink or source devices.The "Over DTP" ports are pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from the MPS 602 control ports to the "Over DTP" ports.
   Quantity/type  (2) RS-232 and IR via (2) 3.5 mm 5-pole captive screw connectors
   Serial control pass-through ports  (2) bidirectional RS-232
      Input/DTP Tx  (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port)
      Output/DTP Rx  (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port)
   Baud rates  300 to 38400 baud
   Protocol  8 or 7 data bits, 1 or 2 stop bits, no parity (default), even or odd parity
   Serial control pin configuration  1 = Tx, 2 = Rx, 3 = GND
   IR pass-through control ports  2 bidirectional TTL level (0 to 5 V) modulated infrared control
from 30 kHz up to 60 kHz
      Input/DTP Tx  (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with RS-232 port)
      Output/DTP Rx  (1) RS-232 (1) 3.5 mm 5-pole captive screw connector
(shared with RS-232 connector)
   IR control pin configuration  3 = GND, 4 = IR Tx, 5 = IR Rx
General
   Power supply  Internal
Input: 100-240 VAC, 50-60 Hz, 44W
   Power consumption   
      MPS 602  Full Load, 22 W
      MPS 602 SA  Full load, amp at 1/8 power: 44 W
      MPS 602 MA  Full load, amp at 1/8 power: 44 W
   Remote power capability  Supports up to two endpoints (one DTP Tx, one DTP Rx)
   Temperature/humidity  Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Power consumption  22 watts
   Thermal dissipation   
      MPS 602  Full load, 69 BTU/hr
      MPS 602 SA  Full load, amp at 1/8 power: 102 BTU/hr
      MPS 602 MA  Full load, amp at 1/8 power: 102 BTU/hr
   Mounting   
      Rack mount  Yes, with included brackets
   Enclosure type  Metal
   Enclosure dimensions  1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 43.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
   Product weight  7.0 lbs (3.2 kg)
   Shipping weight  10 lbs (5 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, ICES, FCC Class A, VCCI, ICES
      Environmental  Complies with the appropriate requirements of RoHS, WEEE
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
 
 

 

View our Articles on line 2023