Extron DTP T USW 233
Three Input Switcher with Integrated DTP Transmitter

Extron DTP Systems
Home > Extron > DTP Systems > DTP T USW 233
Extron DTP T USW 233 Three Input Switcher with Integrated DTP Transmitter
Extron DTP T USW 233
Product Code: DTPTUSW233
 Buy Sell Sales Extron DTP T USW 233

The Extron DTP T USW 233 is a three input switcher for sending HDMI or analog video, audio, and control up to 230 feet (70 meters) over a shielded CATx cable to Extron DTP-enabled products. It is HDCP compliant and provides two HDMI inputs, one VGA or component video input, and one DTP 230 twisted pair output. The DTP T USW 233 supports computer video up to 1920x1200, including 1080p/60 and 2K. It digitizes incoming analog video for reliable display on a variety of output devices. The switcher also offers many integrator-friendly features such as EDID Minder®, auto-switching between inputs, audio input assignment, and remote power capability. These features plus the low profile enclosure make the DTP T USW 233 ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.
 
• Transmits HDMI or analog video, control, and analog audio up to 230 feet (70 meters) over a shielded CATx cable — The DTP T USW 233 provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
• Inputs: Two HDMI, one VGA or component video on 15-pin HD, one 3.5 mm stereo mini jack for audio
• Output: One DTP 230 twisted pair output on RJ-45
• Two HDMI inputs and one VGA or component video input — The DTP T USW 233 allows for switching between HDMI and analog video sources.
• Auto-switching between inputs — Auto-switching allows for simple, unmanaged installation in locations such as in a lectern or under a conference table. When multiple inputs are active, the switching priority is configurable.
• Supports computer video up to 1920x1200, including HDTV 1080p/60 and 2K — The DTP T USW 233 supports digital signal transmission up to 230 feet (70 meters) over a shielded twisted pair cable and maintains superior image quality at the highest resolutions.
• Compatible with CATx shielded twisted pair cable — The DTP T USW 233 fully supports a maximum transmission distance of 230 feet (70 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
• Accepts additional analog stereo audio signals — The DTP T USW 233 accepts stereo analog audio signals for simultaneous transmission over the same shielded twisted pair cable. Analog audio is not embedded onto the digital video signal.
• Audio input assignment — The analog audio input can be assigned to any video input, or it can be set to follow the input switch.
• Supports multiple embedded audio formats — The DTP T USW 233 is compatible with a broad range of multi-channel audio signals, providing reliable operation with HDMI sources.
• Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
• Remote power capability — For simplified installation, the transmitter can be remotely powered by a DTP-enabled product over the twisted pair connection.
• Digital conversion of analog input signals — Analog signals are digitized, ensuring that a reliable, high quality digital video signal is sent to the output destination.
• HDCP compliant
• Supported HDMI specification features include data rates up to 6.75 Gbps, 3D, and HD lossless audio formats
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
• Front panel security lockout — This feature locks out all front panel functions; all functions however, are available through USB or RS-232 control.
• RS-232 control port — Enables the use of serial commands for complete control and configuration via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII commands that allow for quick and easy programming.
• Contact closure remote control with tally output — Allows for remote selection of an input channel, while a tally output provides +5 VDC to light an LED to indicate the currently selected input.
• Front panel USB configuration port — Enables easy configuration without having to access the rear panel.
• LED indicators for signal presence, HDCP, and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
• RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
• Compatible with all DTP 230 Series receivers and DTP-enabled products — Enables mixing and matching with desktop and wallplate receivers, as well as other DTP-enabled products to meet application requirements.
• Easy setup and commissioning with Extron's PCS - Product Configuration Software — Conveniently configure multiple products using a single software application.
• 1" (2.5 cm) high, half rack width metal enclosure — With a low profile enclosure, the device can be installed discreetly wherever needed.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient external universal power supply included
 
Video
   VGA   
      Gain  Unity
      Bandwidth  170 MHz (-3 dB)
      Crosstalk  -50 dB @ 10 MHz, -30 dB @ 100 MHz
      Switching speed  <5 ms. (max)
   HDMI   
      Maximum data rate  6.75 Gbps (2.25 Gbps per color)
      Maximum pixel clock  165 MHz
      Resolution range  Up to 1920x1200 or 1080p @ 60 Hz; 2k
      Formats  RGB and YCbCr digital video
      Standards  DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input — HDMI
   Number/signal type  2 HDMI inputs (or single-link DVI-D with the appropriate DVI-HDMI adapters)
   Connectors  2 female HDMI type A
Video input — VGA
   Number/signal type  1 VGA-QXGA; RGBHV; Y, R-Y, B-Y
   Connectors  1 female 15-pin HD
   Nominal level  1 Vp-p for Y of YUV
0.7 Vp-p for RGB, R-Y, and B-Y
   Min./max. level  Analog, 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 145 kHz
   Vertical frequency  30 Hz to 170 Hz
   Return loss  <-40 dB @ 5 MHz
    NOTE     The VGA input is digitized and output as DTP. The VGA signal is not scaled.
Sync — VGA
   Input type  RGBHV, bi-level and tri-level sync
   Input level  1.9 V to 5.0 Vp-p
   S/N  >90 dB at maximum input (unweighted)
   Max. input voltage  5.0 Vp-p
Interconnection between transmitter and receiver
   Number/signal type  1 DTP 230 output
   Connector  1 female RJ-45
   Termination standard  TIA/EIA T568B
   Transmission distance  Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable
      Cable requirements  Solid conductor, 24 AWG or better
      Cable recommendations  400 MHz bandwidth, STP (shielded twisted pair)
       NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
   Gain  Unbalanced output: 0 dB; balanced output +6 dB
   Frequency response  20 Hz to 20 kHz, ±0.5 dB
   THD + Noise  0.01% @ 1 kHz at nominal level
   S/N  >90 dB, at maximum input (unweighted)
   Crosstalk  <-45 dB @ 20 kHz, or -72 dB @ 1 kHz or below
   Stereo channel separation  >80 dB @ 1 kHz to 20 kHz
Audio input
   Number/signal type  1 analog stereo, unbalanced or
2-digital audio, embedded in the HDMI
    NOTE     Analog audio is not embedded onto the digital video signal.
   Connectors  1 female 3.5 mm mini stereo jack
2 female HDMI Type A (shared with video input)
   Source formats   
      HDMI  LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
      Analog  Analog stereo audio
   Impedance  10k ohms, DC coupled
   Nominal level  -10 dBV
   Maximum level  +6dBV, unbalanced
   CMRR  >60 dB typ @ 1 kHz
   Input gain adjustment  -18 dB to +24 dB, 1 dB steps, adjustable per input
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type  1 analog audio over DTP signal, or
1 embedded digital audio over DTP signal
   Connectors  1 RJ-45 jack
Control/remote — switcher
   Serial control port  RS-232 via (1) 3.5 mm, 3 pole captive screw connector
   Serial control pin configuration  Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd
   Baud rate and protocol (RS-232)  9600 baud, 8 data bits, 1 stop bit, no parity
   Tally port  (1) 3.5 mm, 4 pole captive screw connector
   Tally port pin configuration  Pin 1 = input 1 tally, pin 2 = input 2 tally, pin 3 = input 3 tally, pin 4 = +5 VDC
   Contact closure remote control  (1) 3.5 mm, 4 pole captive screw connector
   Contact closure pin configuration  Pin 1 = input 1, pin 2 = input 2, pin 3 = input 3, pin 4 = Gnd
   USB control port  1 front panel female mini USB, type B
   USB standards  USB 2.0, high speed
   Program control  Extron Simple Instruction Set (SISTM)
Control/remote — (RS-232/IR over DTP)
    NOTE     Protocol is mirrored between the connected DTP 230 Rx and the Over DTP output port. Signals from a control device pass into the Over DTP port, are embedded with the DTP signal, and sent to the DTP 230 Rx endpoint for control of remote sink and source devices.

The Over DTP port is a pass-through connection to the DTP endpoint. There is no RS-232 or IR insertion from the DTP T USW 233 control port to the Over DTP port.
   Serial control pass-through port  1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw connector
   Serial control pin configuration  Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd
   Baud rates  300 to 38400 baud
   Protocol  8 or 7 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
   IR pass-through control port  TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
   IR control pin configuration  3 = GND, 4 = IR Tx, 5 = IR Rx
General
   Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power consumption   
      Device  5.5 watts
      Device and power supply  7.2 watts
    NOTE     The DTP T USW 233 can be powered either locally by the external power supply or remotely by a receiver on the other end of the twisted pair cable.
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, vents on top and sides
   Thermal dissipation   
      Device  15.4 BTU/hour
      Device and power supply  21.0 BTU/hour
   Mounting
      Rack mount  Yes, with optional 1U high rack shelf
      Furniture mount  Yes, with optional under-desk mounting kit
   Enclosure type  Metal
   Enclosure dimensions  1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight  0.6 lbs (0.3 kg)
   Shipping weight  2 lbs (1 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE**, C-tick, FCC Class A**, ICES, VCCI
      Environmental  Complies with the appropriate requirements of RoHS, WEEE
    NOTE     **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.

 
 
 

 

View our Articles on line 2023