Extron DTP T HWP 332D
Long Distance Two Input DTP Transmitter for HDMI - Decora® Wallplate

Extron DTP Systems
Home > Extron > DTP Systems > DTP T HWP 332D
Extron DTP T HWP 332D Long Distance Two Input DTP Transmitter for HDMI - Decora® Wallplate
Extron DTP T HWP 332D
Product Code: DTPTHWP332D
 Buy Sell Sales Extron DTP T HWP 332D

The Extron DTP T HWP 332 D is a two input Decora®-style transmitter for sending HDMI, audio, and control up to 330 feet (100 meters) over a shielded CATx cable to Extron DTP 330-enabled products. It is HDCP compliant and provides two HDMI inputs, both with independent analog stereo audio connections. The DTP T HWP 332 D supports computer video up to 1920x1200, including HDTV 1080p/60 and 2K. The transmitter also offers many integrator-friendly features such as EDID Minder®, auto-switching between inputs, remote power capability, and bidirectional RS-232 and IR pass-through for remote AV device control. The wall-mountable design of the DTP T HWP 332 D provides the convenience of placing input connections precisely where they are needed.
 
• Transmits HDMI, control, and analog audio up to 330 feet (100 meters) over a shielded CATx cable — The DTP T HWP 332 D provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
• Inputs: Two HDMI, two 3.5 mm stereo mini jacks for audio
• Output: One DTP 330 twisted pair output on RJ-45
• Two HDMI inputs — The DTP T HWP 332 D allows for switching between HDMI sources.
• Auto-switching between inputs — Auto-switching allows for simple, unmanaged installation in locations such as in a lectern or floor box. When multiple inputs are active, the highest-numbered input with an active video signal takes priority.
• Supports computer video up to 1920x1200, including HDTV 1080p/60 and 2K — The DTP T HWP 332 D supports digital signal transmission up to 330 feet (100 meters) over a shielded twisted pair cable and maintains superior image quality at the highest resolutions.
• Compatible with CATx shielded twisted pair cable — The DTP T HWP 332 D fully supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
• Independent analog audio inputs — The DTP T HWP 332 D provides two independent stereo analog audio connections for simultaneous transmission over the same shielded twisted pair cable. Analog audio is not embedded onto the digital video signal.
• Supports multiple embedded audio formats — The DTP T HWP 332 D is compatible with a broad range of multi-channel audio signals, providing reliable operation with HDMI sources.
• Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
• Remote power capability — For simplified installation, the transmitter can be remotely powered by a DTP 330-enabled product over the twisted pair connection.
• HDCP compliant — Fully supports HDCP-encrypted sources, with selectable authorization for unencrypted content.
• Supported HDMI specification features include data rates up to 6.75 Gbps, 3D, and HD lossless audio formats
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
• RS-232 control port — Enables the use of serial commands for complete control and configuration via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII commands that allow for quick and easy programming.
• Contact closure control port — Can be used for external control of input switching.
• Front panel USB configuration port
• LED indicators for signal presence, HDCP, and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
• RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
• Compatible with all DTP 330 Series receivers and DTP 330-enabled products — Enables mixing and matching with desktop and wallplate receivers, as well as other DTP 330-enabled products to meet application requirements.
• Mounts in an included two-gang Decora®-style wallplate — The two-gang Decora-style wallplate is available in black or white to blend with a wide range of environments.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient external universal power supply included
 
NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Video
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution range  Up to 1920x1200 or 1080p @ 60 Hz; 8 bit color depth
2048x1080p @ 60 Hz (2K)
   Formats  RGB and YCbCr digital video
   Standards  DVI 1.0, HDMI, HDCP 1.2, EDID 1.3, CEA-861E
Video input
   Number/signal type  2 single link HDMI (or DVI-D*) input
   Connectors  2 female HDMI type A
Interconnection between transmitter and receiver
   Signal type  1 DTP 330 output
   Connectors  1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver
   Termination standards  TIA/EIA T568B
   DTP signal   
      Signal transmission distance  Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
      Cable requirements  Solid conductor, 24 AWG or better
      Cable recommendations  400 MHz bandwidth STP cable
    NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
   Gain  Unbalanced output: 0 dB; balanced output +6 dB
   Frequency response  20 Hz to 20 kHz, ±0.5 dB
   THD + Noise  0.03% @ 20 Hz to 20 kHz at maximum output
   S/N  >90 dB, at maximum output (15 dBu), balanced (unweighted)
   Stereo channel separation  >90 dB @ 1 kHz to 20 kHz
Audio input
   Number/signal type   
      Analog audio (over DTP)  2 stereo, unbalanced
       NOTE     Analog audio is not embedded onto the digital video signal.
      Digital audio  2 embedded digital audio on DTP
      Embedded digital audio source formats  2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
   Connectors  (2) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground)
   Impedance  >10k ohms, DC coupled
   Nominal level  -10 dBV (316 mVrms)
   Maximum level  +7 dBu, unbalanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type   
      Analog audio (over DTP)  1 stereo, unbalanced
      Digital audio  1 embedded digital audio on DTP
      Embedded digital audio source formats  2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
   Connectors  1 female RJ-45 jack
Communications — transmitter
   Serial control port  RS-232 via (1) 3.5 mm, 5-pole captive screw connector for RS-232 control (±5 V) and contact closure input switching
   Baud rate and protocol  9600 baud rate, 8 data bits, 1 stop bit, no parity
   Contact closure remote control  (1) 3.5 mm, 5-pole captive screw connector (connector is shared with RS-232 control port)
   USB control port  1 front panel female mini USB type B
   USB standards  USB 2.0, high speed
   Program control  Extron Simple Instruction Set (SIS™)
Communications — external device (pass-through)
   Serial control pass-through port  Bidirectional RS-232
   Connector   
      DTP output  (1) 3.5 mm captive screw connector, 5-pole
   Baud rates  300 to 38.4k baud
   Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
   IR pass-through control port  TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
      DTP output  (1) 3.5 mm captive screw connector, 2-pole
    NOTE     Protocol is mirrored between the connected DTP 230 or DTP 330 endpoints and the "Over DTP" ports on the DTP T HWP 332 D. Signals from a control device pass into each "Over DTP" port, are embedded with the DTP signal, and sent to the individual endpoints for control of remote sink or source devices.
General
   Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power consumption   
      Transmitter   
         Device  4.8 watts, 12 VDC
         Device and power supply  6.3 watts, 100-240 VAC, 50-60 Hz
    NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Thermal dissipation   
      Transmitter   
         Device  15.3 BTU/hr
         Device and power supply  20.1 BTU/hr
   Mounting   
      Rack mount  Yes, with included rack ears
   Enclosure type  Metal
   Enclosure dimensions   
      Faceplate  Two (2.6" H* x 1.3" W x 0.2" D
[6.6 cm H x 3.3 cm W x 0.6 cm D])
(Fits the opening in a 2 gang Decora©-style wallplate.)
      Device  Two (2.7" H x 3.5" W x 1.9" D
[6.9 cm H x 8.9 cm W x 4.8 cm D])
    NOTE     *Height is 4.2" (10.4 cm) including mounting tabs.
   Product weight  0.4 lbs (0.2 kg)
   Shipping weight  1.8 lbs (0.8 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  c-UL, UL
      EMI/EMC  AS/NZS, CE**, FCC Class A**, ICES, VCCI
         Environmental  Complies with the appropriate requirements of RoHS, WEEE
    NOTE     **CE and FCC testing is conducted with STP cable.
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
 
 

 

View our Articles on line 2023