AJA D10CEA SDI to Analog audio and Video Converter |
Product Code:D10CEA
 |
The AJA D10CEA converts SD-SDI video with embedded audio to 10-bit component or composite analog video and 4 channel balanced analog
audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU N10), RGB, 1 composite or 1 Y/C (S-Video). The 4 ch analog audio outputs can be wired in a balanced or unbalanced
configuration.
The 4 audio output channels can be selected as group 1-4 from SMPTE embedded audio. Audio level has 4 settings. Audio and video output connections are available on a 25 pin "D"
subminiature connector – a break-out cable is supplied. All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also
outputs two re-clocked loop-thru SDI outputs.
|
| Features of D10CEA |
• SD-SDI to Analog Audio and Video Converter
• SDI with Embedded Audio Input
• 2 Re-clocked, Loop-Thru SDI Outputs
• 10-bit Component or Composite Analog Video Outputs
• 4 ch Balanced Analog Audio Output
• Selectable Audio level
• Selectable Audio Channel Group
• External Dip Switch Configuration
• 5 Year Warranty
|
| Technical Specifications of D10CEA |
| Inputs |
• SD-SDI (SMPTE 259M) w/embedded audio
• 1 x BNC
|
| Outputs |
• Video: YPbPr - SMPTE
Betacam
RGB
NTSC
PAL
YC (S-Video)
10-bits
•Audio: 4 Channel Balanced/Unbalanced
Video/Audio outputs on 25-pin D connector 2 SDI Re-clocked loop-thru
2 x BNC
• Video, +/-.25db to 5.5 Mhz Y
• Audio, +/-.5db to 20Khz
|
| User Controls |
• External Dipswitch
• Video Format
• Pedestal
• H&V blanking
• Audio group 1,2,3,4
• Audio Level, adjustable via switch selection:+24, +18, +15, +12 dBu
• Full Scale Digital
|
Size
|
• 5.8" x 3.1" x 1" (147 x 79 x 25 mm)
|
| Power |
• +5VDC Regulated, 4 watts, Power Supply Required (sold separately)
|
|
|
|
|
