Hollyland LARK 150 is a compact 2.4 GHz digital wireless microphone system. It consists of 2 TX & 1 RX Combo, it is widely using by videographers, vloggers and mobile journalists. Plug and play, the
system can make you focus on getting the shot.
The transmitter designed with a built-in omnidirectional microphone and also can use it as a lavalier mic. The receiver Equipped with a OLED display shows battery
status, audio level, signal strength and more. Hollyland LARK 150 is delivering professional-grade sound quality of a range up to 100m with a 5ms ultra low latency. It provides 3 recording modes, mono, stereo and safety mode.
The receiver’s 3.5mm TRS output sends a mic-level signal, making it compatible with an array of devices such as DSLRs, portable audio recorders, computer and so on. And the charging case design that serves easy charging,
auto-pairing, upgrade and storage for the whole system.
- 5ms latency with range up to 100m
- Combo 2 TX and 1 RX
- 2.4 GHz wireless digital transmission with clear sound under any conditions
- Compact size with light weight
- Professional-grade sound quality
-
Integrated lithium batteries, with an ultra long run time
- 21-stage digital gain adjustment
- Contact charging in the case
- Multiple systems using in one location
| System |
|
| Wireless Transmission |
Digital 2.4 GHz |
| Configuration |
Transmitter, Receiver, Charging Case |
| Transmission Range |
100m |
| Latency |
5ms |
| Dynamic Range |
100 dBA |
| Encryption |
128-Bit |
| Max Systems per Setup |
8 |
| Transmitter |
|
| Installation |
Lavalier |
| Dimensions |
37*37*17.5mm |
| Weight |
20.5g |
| OLED Display |
None |
| MIC |
Support Built-In and Lavalier Mic |
| Interface |
1 x 3.5 mm TRS Female Input（For Lavalier Mic） 1 x Charging/Upgrading Contacts
|
| Polar Pattern |
Omnidirectional |
| Frequency Response |
20Hz~20KHz |
| Reference Audio Input Level |
-65 dBV |
| Power |
200mAh Built-In Battery |
| Battery Type |
Rechargeable |
| Battery Charging Time |
1.5h |
| Battery Life |
4.5h |
| Indicators |
1 x LED（Link Status） 1 x LED (Battery Status)
|
| Receiver |
|
| Installation |
Belt Clip |
| Dimensions |
67*41*20.5mm |
| Weight |
51g |
| OLED Display |
Yes |
| Interface |
1 x 3.5 mm TRS Output Interface 1 x 3.5mm Headset Interface
1 x Charging/Upgrading Contacts |
| Gain Range |
-10~+10dB |
| Audio Output Level Change Range |
21-State：45dB |
| Power |
530mAh Built-In Battery |
| Battery Type |
Rechargeable |
| Battery Charging Time |
2h |
| Battery Life |
7.5h |
| Display & Indicators |
1 x OLED（Recording Mode, UV Level, Battery Status, Signal Strength） 2 x LED（Link Status） |
| Charging Case |
|
| Dimensions |
121*61*43.5mm |
| Weight |
227.5g |
| Interface |
1 x USB Type-C Interface |
| Power |
3350mAh Built-In Battery or DC |
| Battery Type |
Rechargeable |
| Battery Charging Time |
2.5h |
| Microphone |
|
| Polar Pattern |
Omnidirectional |
| Sound Field |
Mono/Streo |
| Frequency Range |
20Hz~20KHz |
| Maximum Input Sound Pressure Level |
100dB SPL（1KHz@1m） |
|
