Paralinx
Arrow-X HDMI HD Video Transmitter System
|

Product
Code: ARROWX HDMI

 |
The Paralinx Arrow-X HDMI System is
a revolutionary HD Video Transmission system offering Realtime Wireless HD with
robust long range for your Television, Film, Broadcast, Industrial or UAV/UAS
application.
The Paralinx Arrow-X transmits full-HD 1080p/60 with a range of up to 700
feet (215m) with default antennas (longer range possible with optional antennas)
and still maintains an incredible sub 1ms latency glass-to-glass.
Both the Arrow-X HDMI transmitter and receiver feature 2-Pin Lemo power
connectors capable of a wide 7-17V unregulated input voltage. The Arrow-X
features HDMI input (transmitter) and dual 3G-HDSDI outputs (receiver). A 3G-SDI
transmitter is also available.
Much like the popular Paralinx Tomahawk, the Arrow-X transmits Full-HD video
(up to 1080p/60 4:2:2) with less than 1 millisecond delay and is capable of
handling up to 4 simultaneous receivers. The transmitter weighs approximately
6.3oz/178g (without antennas) and the receiver weighs 12 oz/340g (without
antennas).
|
• Lightweight Minimalist design
for Handheld, Steadicam, Gimbal, and UAV Payload
• Transmitter features HDMI input. Receiver features dual 3G-SDI outputs.
• Rugged machined-aluminum enclosure for the transmitter and ABS enclosure for
receiver
• Long-range transmission - Up to 700 feet (215 meters) *
• REAL-TIME viewing - Less than 1 millisecond latency
• Uncompressed full-HD video signal allow critically accurate monitoring
• Multicast capable
• 128 bit AES Encryption - Secure transmission
• Operates on 5gHz frequency band
• Conforms to major technical and environmental standards including FCC, CE, MIC
(TELEC) and RoHS Specifications
|
Dimensions (Tx): |
4" x 2.5" x 0.8" (not including antennas) 108mm x 67mm x 21mm |
Weight (Tx): |
6.6oz / 178g (without antennas) |
Dimensions (Rx): |
5" x 5.6" x 1.3" (not including antennas) 143mm x 128mm x 33mm |
Weight (Rx): |
12oz / 340g (without antennas) |
In the box: |
• 1 Arrow-X HDMI transmitter w/stock 2dbi antennas
• 1 Arrow-X receiver w/stock 2dbi antennas (dual-SDI outputs)
• 1 18in/45cm PTap to Lemo power cable
• 1 18in/45cm BNC Cable (right-angle to right-angle)
• 1 AC power adapter with 2-pin Lemo-type connector (per receiver)
• 1 Remote control and IR cable (for menu access only)
• 1 mini-USB to USB cable (for firmware updates only) |
|
|
|
|
|
|