|
The new Engineered Sound.
Contractor-exclusive innovations for
every acoustical challenge. And safe
haven from Radio Frequency
Interference (RFI).
This
low-profile omnidirectional
condenser boundary microphone is
designed for clear, highly
intelligible sound reinforcement,
professional recording and
teleconferencing in table-,
ceiling-, or panel-mount
applications. The microphone is
equipped with a self-contained power
module with an XLRM-type output
connector, eliminating the need for
an external power module. The
microphone offers unsurpassed
immunity from radio frequency
interference thanks to
Audio-Technica’s UniGuard®
innovations. Protected by a rugged
all-metal case with a two-layer
steel mesh grille, the microphone
has a 360° pickup angle, and is
available in two colors: black
(ES945) and white (ES945W).
|
|
Element |
Fixed-charge back plate,
Permanently polarized
condenser |
|
Polar Pattern |
Half-Cardioid |
|
Frequency Response
|
40 - 12,000 Hz |
|
Open Circuit
Sensitivity |
-42dB (7.9 mV)
re 1V at 1 Pa
|
|
Impedance |
200 ohms |
|
Maximum Input Sound
Level |
142 dB SPL, 1 kHz at 1%
T.H.D. |
|
Dynamic Range |
113
dB, 1 kHz at Max SPL |
|
Signal-to-Noise Ratio |
65 dB, 1 kHz at 1 Pa |
|
Phantom Power
Requirements |
11-52V DC, 2 mA typical |
|
Weight
|
64 g (2.3
oz) |
| Dimensions |
69.0 mm (2.72") long,
30.0 mm (1.18") diameter
|
|
Output Connector |
Integral 3-pin
XLRM-type |
|
Accessories Included |
One pair isolators |
|
|
