Audio Technica ES915H Hypercardioid Condenser Gooseneck Microphone
Product Code: ES915H
Features
• Designed for professional recording and demanding sound pickup applications
• Low-profile element provides uniform hypercardioid polar pattern
• Plugs into any standard XLRF-type connector
• Included low-profile isolation mount attenuates noise, shock and vibration
Equipped with Audio-Technica's legendary electro-acoustic design innovations, the ES915H is ideal for applications where quality sound and flexible performance are imperative.
This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency
interference thanks to UniGuard® innovations. The ES915H also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone's low-profile element provides a
uniform hypercardioid polar pattern with 100º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and
vibration transmitted through the mounting surface. |
| Element |
Fixed-charge back plate, Permanently polarized condenser |
| Polar Pattern |
Hypercardioid |
| Frequency Response |
80 - 20,000 Hz |
| Open Circuit Sensitivity |
-40dB (10.0 mV) re 1V at 1 Pa |
| Impedance |
250 ohms |
| Maximum Input Sound Level |
138 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off |
80 Hz, 18 db/octave |
| Switches |
Flat, roll-off |
| Dynamic Range |
109 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
65 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
11-52V DC, 4 mA typical |
| Weight |
ES915H12 125 g, ES915H18 135 g, ES915H21 140 g, ES915H24 145 g |
| Dimensions |
Length - ES915H12 304.8 mm, ES915H18 457.2 mm, ES915H21: 533.4 mm, ES915H24 609.6mm
Head diameter 8.4 mm (all models),
Base diameter 18.9 mm (all models) |
| Output Connector (Power module) |
Integral 3-pin XLRM-type |
| Accessories Included |
AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8"-27 to 3/8"-16 threaded adapter |
|
|
