Audio Technica ES915SML MicroLine Condenser Gooseneck Microphone with Mute Switch/LED
Product Code: ES915SML
Features
• Designed for professional recording and demanding sound pickup applications
• Low-profile element provides uniform cardioid polar pattern
• Plugs into any standard XLRF-type connector
• Included low-profile isolation mount attenuates noise, shock and vibration
Equipped with Audio-Technica's legendary electro-acoustic design innovations, the ES915SML is a wide-range miniature condenser microphone with a MicroLine polar
pattern and a mute switch/LED. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio
frequency interference thanks to UniGuard® innovations. The ES915SML also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. A mute switch in the base lights when
the mic is "on". The microphone's low-profile element provides a uniform MicroLine polar pattern with narrow 90º acceptance angle. The microphone can be mounted on a
podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface. |
Element |
Fixed-charge back plate, Permanently polarized condenser |
Polar Pattern |
MicroLine |
Frequency Response |
30 - 20,000 Hz |
Open Circuit Sensitivity |
-35dB (17.7 mV) re 1V at 1 Pa |
Impedance |
250 ohms |
Maximum Input Sound Level |
133 dB SPL, 1 kHz at 1% T.H.D. |
Low Frequency Roll Off |
80 Hz, 18 db/octave |
Switches |
Flat, roll-off |
Dynamic Range |
109 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio |
70 dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
11-52V DC, 4 mA typical |
Weight |
ES915SML12 129 g, ES915SML18 139 g, ES915SML21 144 g |
Dimensions |
Length - ES915SML12 423.8 mm, ES915SML15 500.2 mm, ES915SML18: 576.2 mm Head diameter 8.4 mm (all models), Base diameter 18.9 mm (all models) |
Output Connector (Power module) |
Integral 3-pin XLRM-type |
Accessories Included |
AT8138 MicroLine® foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8”-27 to 3/8”-16 threaded adapter |
|
|