Audio Technica U853PMU UniLine Condenser Hanging Microphone, Black
Product Code: U853PMU
Features
• Designed for suspension over choirs, instrumental groups and theater stages
• Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
• UniLine® polar pattern provides narrow 90° acceptance angle
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Low-profile design with low-reflectance finish for minimum visibility
• Available in two colors: black (U853PMU) and white (U853PMWU)
Featuring Audio-Technica’s UniLine® line-cardioid element, the U853PMU condenser hanging microphone comes equipped with a wall/ceiling plate power module for permanent
installation in a standard, single-gang electrical box. The phantom-powered microphone also offers UniGuard® innovations that deliver unsurpassed immunity from radio frequency interference. It
accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. Its 80 Hz low-cut UniSteep® filter reduces pickup of
low-frequency ambient noise. |
| Element |
Fixed-charge back plate, Permanently polarized condenser |
| Polar Pattern |
Line Cardioid |
| Frequency Response |
30 - 20,000 Hz |
| Open Circuit Sensitivity |
-35dB (17.7 mV) re 1V at 1 Pa |
| Impedance |
200 ohms |
| Maximum Input Sound Level |
124 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off |
80 Hz, 18 db/octave |
| Switches |
Flat, roll-off
0 dB/+10 dB gain setting |
| Dynamic Range |
102 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
72 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
11-52V DC, 4 mA typical |
| Weight |
Microphone: 30 g
Power module: 97 g |
| Dimensions |
Microphone: 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameter
Power module: 2.80" (71.0 mm) W x 4.55" (115.5 mm) H x 1.42" (36.0 mm) D |
| Output Connector (Power module) |
Screw Terminals |
| Cable |
25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector |
| Accessories Included |
AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter |
|
|
