Audio Technica ATND971 Cardioid Condenser Boundary Microphone with Dante™
Product Code: ATND971
Discontinued
Features
• Bridges the gap between audio and IT
• Transmits audio and control data together over Audinate’s Dante™ network
• Perfect fit for boardrooms and other meeting spaces
• Supports up to 512 bidirectional audio channels
• Easy to install and operate
• Features UniGuard® RFI-shielding technology and UniSteep® low-cut filter
Audio-Technica's ATND971 Cardioid Condenser Boundary Network Microphone bridges the gap between audio and IT as the first wired microphone that transmits audio and
control data together over Audinate's Dante™ network protocol. A simple Ethernet connection allows the Network Microphone to communicate across an existing network of Dante-enabled devices
and, with the microphone's programmable user switch, control any of those devices at the push of a button. |
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
Half-cardioid (cardioid in hemisphere above mounting surface) |
| Frequency Response |
30 - 20,000 Hz |
| Maximum Input Sound Level |
117 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off |
80 Hz, 18 dB/octave |
| Switches |
Local Mode: Touch-sensitive capacitivetype user switch function: toggle (mute
on power up), toggle (talk on power up), momentary on, momentary off; Low-cut
filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB
Remote Mode: Low-cut and Gain via third-party software* |
| Signal-to-Noise Ratio |
68 dB, 1 kHz at 1 Pa |
| Power Requirements |
PoE IEEE802.3af standard (Power consumption 1.5W) |
| Weight |
393 g |
| Dimensions |
110.0 mm (4.33") maximum length,
89.5 mm (3.52") maximum width,
35.8 mm (1.41") maximum height
|
| Output Connector |
RJ45 |
| Cable |
9.8' (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Accessories included |
Soft protective pouch |
|
|
