Audio Technica PRO 47T Cardioid Condenser Thread-mount Gooseneck Microphone, 315mm
Product Code: PRO47T
Features
• Wide-range condenser element with low-mass diaphragm
• Self-contained electronics eliminate need for external power modules
• Flat, smooth frequency response
• Quiet, fixed-placement, long-life gooseneck
• 3.0 m cable permanently attached between microphone and XLRM connector
• Requires 9V to 52V DC phantom power
This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and
other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone's self-contained electronics eliminate need for
external power modules. Available in two lengths: 15.79" (PRO47TL) and 12.40" (PRO47T). |
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
70 - 16,000 Hz |
| Open Circuit Sensitivity |
-37 dB (14.1 mV) re 1V at 1 Pa |
| Impedance |
100 ohms |
| Maximum Input Sound Level |
134 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range |
106 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
66dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
9-52V DC, 2 mA typical |
| Weight |
63 g |
| Dimensions |
12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter |
| Output Connector |
3-pin XLRM-type on cable |
| Cable |
9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector |
| Accessories included |
AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud |
|
|
