Audio Technica ES935C6 Cardioid Condenser Gooseneck Microphone
Product Code: ES935C6
Discontinued
Features
• Designed for quality sound reinforcement, professional recording, TV
• Low-profile element provides uniform cardioid polar pattern
• Unobtrusive design with an overall length of only 7.77" (197.3 mm)
• Plugs into any standard XLRF-type connector
• Available interchangeable elements permit angle of acceptance 90º to 360°
• Requires 11V to 52V DC phantom power
This super-compact, small-diameter gooseneck delivers flexible positioning with a sleek, low-profile appearance. The mic’s low-profile element provides a
uniform cardioid polar pattern with 120º acceptance angle. It is equipped with an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone offers unsurpassed
immunity from radio frequency interference thanks to UniGuard® innovations. |
| Element |
Fixed-charge back plate, Permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
30 - 20,000 Hz |
| Open Circuit Sensitivity |
-40dB (10.0 mV) re 1V at 1 Pa |
| Impedance |
250 ohms |
| Maximum Input Sound Level |
138 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off |
80 Hz, 18 db/octave |
| Switches |
Flat, roll-off |
| Dynamic Range |
109 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
65 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
11-52V DC, 4 mA typical |
| Weight |
104 g |
| Dimensions |
197.3 mm (7.77") long, 8.4 mm (0.33") head diameter, 18.9 mm (0.74") base diameter |
| Output Connector (Power module) |
Integral 3-pin XLRM-type |
| Accessories Included |
AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8"-27 to 3/8"-16 threaded adapter |
|
|
