Audio Technica PRO 44 Unidirectional Condenser Boundary Microphone
Product Code: PRO44
Features
• Very low-profile design for minimum visibility
• Wide-range condenser element with low-mass diaphragm
• Self-contained electronics eliminate need for external power modules
• Rugged design and construction
• 25' (7.6 m) detachable cable (TA3F to XLRM-type)
• Dimensions 73mm x 90.5mm x 15mm
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO 44 is ideal for conference tables, podiums, lecterns and
other installed-sound uses. This versatile boundary mic’s self-contained electronics eliminate the need for external power modules. The PRO 44 is equipped with a wide-range
condenser element with low-mass diaphragm for superior performance. |
| Element |
Condenser |
| Polar Pattern |
Half-cardioid (cardioid in hemisphere above mounting surface) |
| Frequency Response |
70 - 16,000 Hz |
| Open Circuit Sensitivity |
-25 dB (56.2 mV) re 1V at 1 Pa |
| Impedance |
100 ohms |
| Maximum Input Sound Level |
114 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range |
86 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
66dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
9-52V DC, 2 mA typical |
| Weight |
67 g |
| Dimensions |
2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height |
| Output Connector |
Integral 3-pin XLRM-type |
| Cable |
25' (7.6 m) long, with TA3F and XLRM-type connectors |
|
|
