Audio Technica U857RL UniLine Condenser Adapter-mount Gooseneck Microphone, 421mm

Audio Technica U857RL
Audio Technica U857RL

Audio Technica U857RL UniLine Condenser Adapter-mount Gooseneck Microphone, 421mm

Product Code: U857RL

Buy Sell Sales Audio Technica U857RL


Features
• Designed for high-quality sound reinforcement
• UniLine® polar pattern provides narrow 90° acceptance angle
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology
• UniSteep® filter provides a steep low-frequency attenuation
• Accepts interchangeable elements

The 16.58" version of U857R, the U857RL cardioid condenser adapter-mount gooseneck microphone features a small-diameter gooseneck with virtually no “memory.” Its ultra-flexible, robust design permits easy adjustment into desired shape while resisting inadvertent repositioning. This cardioid condenser adapter-mount gooseneck microphone direct mounts to any 5/8"-27 stand. Equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference, the U857RL accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30 - 20,000 Hz
Open Circuit Sensitivity -39 dB (11.2 mV) re 1V at 1 Pa
Impedance 250 ohms
Maximum Input Sound Level 139 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off
Dynamic Range 115 dB, 1 kHz at Max SPL
Signa;-to-Noise Ratio 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight Microphone: 131 g
Power Module: 81 g
Dimensions Microphone: 16.58" (421.0 mm) long, 0.48" (12.2 mm) head diameter
Power Module: 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
Output Connector Integral 3-pin XLRM-type
Cable 9.8' (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories included AT8538 power module; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; AT8153 two-stage foam windscreen