Audio Technica ATM350 Cardioid Condenser Clip-On Microphone
Product Code: ATM350
Features
• Ataches to brass, reeds, piano, acoustic bass, snare, toms and violin
• UiMount® clip permits accurate positioning
• Uique violin mount
• Cisp, clear, well-balanced response, even at high SPLs
• Crdioid polar pattern reduces pickup of sounds from the sides and rear
• Iterchangeable elements available
Supplied with Audio-Technica's versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone
designed to clip to brass, reeds, piano, snare, toms, violin and all percussive instruments. With its compact and discreet design, the ATM350 is able to fin into smaller spaces. The microphone offers a
crisp, clear, well-balanced response, even at high SPLs. |
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
40 - 20,000 Hz |
| Open Circuit Sensitivity |
-49 dB (3.5 mV) re 1V at 1 Pa |
| Impedance |
50 ohms |
| Maximum Input Sound Level |
149 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequencey Roll Off |
80 Hz, 12 dB/octave |
| Switches |
Flat, roll-off |
| Dynamci Range |
122 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
67 dB, 1 kHz at 1 Pa |
| Phantom Power Reqirements |
11-52V DC, 3.5 mA typical |
| Weight |
Microphone: 14.5 g (0.5 oz)
Power module: 81.2 g (2.9 oz) |
| Dimensions |
Microphone: 37.8 mm (1.49") long, 12.2 mm (0.48") diameter
Power module: 92.9 mm (3.66") long, 18.9 mm (0.74") diameter |
| Output Connector |
Power module: ntegral 3-pin XLRM-type |
| Cable |
4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector |
| Accessories |
AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch |
|
|
