Audio Technica ES935ML6 MicroLine Condenser Gooseneck Microphone
Product Code: ES935ML6
Discontinued
Features
• Designed for professional recording and demanding sound pickup applications
• Low-profile element provides uniform MicroLine polar pattern
• Unobtrusive design with an overall length of only 316.3 mm
• Plugs into any standard XLRF-type connector
• Included shock mount attenuates noise, shock and vibration
This super-compact, small-diameter gooseneck delivers flexible positioning with a sleek, low-profile appearance. The mic's low-profile element provides a
uniform MicroLine polar pattern with narrow 90º acceptance angle. It is equipped with an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The
microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations |
| Element |
Fixed-charge back plate, Permanently polarized condenser |
| Polar Pattern |
MicroLine |
| Frequency Response |
30 - 20,000 Hz |
| Open Circuit Sensitivity |
-35dB (17.7 mV) re 1V at 1 Pa |
| Impedance |
250 ohms |
| Maximum Input Sound Level |
133 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off |
80 Hz, 18 db/octave |
| Switches |
Flat, roll-off |
| Dynamic Range |
109 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
70 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
11-52V DC, 4 mA typical |
| Weight |
108 g |
| Dimensions |
Length 316.3 mm, Head Diameter 8.0 mm, Base Diameter 18.9 mm |
| Output Connector (Power module) |
Integral 3-pin XLRM-type |
| Accessories Included |
AT8138 MicroLine foam windscreen, AT8474 universal isolation mount, AT8473 quick-mount stand adaptor, 5/8"-27 to 3/8"-16 threaded adaptor |
|
|
