|
Tempest CP-222 2.4GHz 2-channel, dual listen wireless BeltStation |
|
Product Code: CP222
|
The CP-222 is a
2-channel wireless BeltStation that operates in conjunction with
the CM-222 or CM-244 Tempest2400 BaseStations. There are 3 modes of
operation for a BeltStation - Normal, Split and Shared. By
switching to Shared or Split Mode, an unlimited number of
BeltStations can be registered to each BaseStation using shared
resources. Each BeltStation user may simultaneously Talk/Listen on
A and B or toggle between A and B in “Single Listen”
mode. Volume is set by rotating the CH A or CH B rotary
control.
There are two Talk buttons on each BeltStation, one for each
channel. The Talk button enables the microphone signal for the
assigned intercom channels. Each Talk button has individual LED
indicators. The Talk button can be latching or momentary. The Call
button sends a 2-wire compatible call signal to any wireless
BeltStation and any hardwired intercom device on the intercom
channel.
BeltStations are provided with a rechargeable Li-Polymer battery
capable of 9+ hours of operation or can be powered by (3) Standard
AA Alkaline batteries. Each BeltStation has its own back-lit
display and menu functions which allow settings to be changed at
the beltstation locally.
|
|
Description |
Audio
Each full-duplex BeltStation establishes a unique audio
path (point-to-point) with the associated CM-222 or CM-244
BaseStation delivering an individualized mix minus signal to other
BeltStations in the system. Therefore, each BeltStation can monitor
a unique mix of intercom channels and other audio sources.
Durability
The CP-222 BeltStations are made of a weather-resistant ABS
co-polymer blend with a high performance polyurethane
over-mold.
Tempest2400
Seamless Roaming
Tempest2400 Seamless Roaming is the ability for one or more
Tempest2400 BeltStations to move freely from one BaseStation to
another without any intervention from the end user. This allows the
implementation of a Tempest2400 wireless intercom system which can
cover large areas with multiple zones or areas in a facility that
would not be adequately supported by a single antenna
installation.
A BeltStation can roam between as many as 16 different BaseStations
(coverage areas or zones). In addition, all Tempest operational
modes (Normal, Shared and Split) are supported for seamless roaming
operation.
|
| Key Features and Benefits: |
• 2-channel,
full-duplex BeltStation
• 2.4GHz, license free operation
• Dual Talk/Listen operation
• Backlit LCD screen shows battery life, RF signal strength
and more
• Stage Announce output with relay closure
• Lithium-Polymer rechargeable battery (or 3 Alkaline AA
batteries)
• Weather resistant enclosure
|
| Roaming Features |
• Seamless
roaming of BeltStation between BaseStations
• Supports Normal, Shared and Split Modes
• Scalable architecture allows for seamless linked roaming
zones
• Seamless handoffs between roaming zones –
automatic |
| |
| System
Specifications |
| RF Frequency: |
2400 to 2480
GHz
|
| RF
Scheme: |
FHSS with TDMA
|
| Effective Radiated Power: |
100mW using
2dBi antenna
|
| Receiver
Sensitivity: |
-93 dBm for 10-5 BER
|
| Radio Certification: |
FCC Part
15.247 and ETS 300.328 rules, license free
|
| Transmission
Range: |
Up to 1,000ft (305m); 500 -
900ft (150 - 275m) typical
|
| Audio Dynamic Range: |
>94dB
|
| Audio Frequency
Response: |
300Hz - 3.8KHz with proprietary
audio voice shaping
|
| BeltStation Specifications |
| Intercom Audio Channels: |
2
|
| Headset
Connector: |
4-pin male XLR
|
| MicrophoneType: |
Dynamic or
Electret, Auto-Selected
|
| Antenna
Internal: |
+2 dBi patch
|
| Charger Input: |
100-240V,
0.3A, 50-60Hz
|
| Charger
Output: |
5V, 1.25A
|
| Battery Charging: |
via mini USB
connector using supplied charger
|
Battery Life,
Rechargeable
Lithium-Polymer: |
Up to 9+ hours
|
Charge Time, Rechargeable
Lithium-Polymer: |
2 3/4
hours in beltstation; 2 1/2 hours in charger (from empty)
|
| Optional
Power: |
3 Standard AA alkaline cells
|
| Battery Life, Alkaline: |
Approximately
4 hours
|
| Environmental |
-4o – 122o F (-20o –
50o C)
|
| Dimensions |
4.0 in W x 6.1
in H x 1.75 in D
(102 mm x 156 mm x 44.5 mm)
|
| Weight |
14.3 oz (0.41 kg)
|
| |
|
|
|
|
|
