| Display |
| Screen
type |
Active matrix TFT color display |
| Size |
7" (17.8 cm), measured diagonally |
| Resolution |
800x480 |
| Dot/pixel
pitch |
134 dpi |
| Aspect
ratio |
Widescreen |
| Color
depth |
18 bit, 256k colors |
| Transparency |
8 bit alpha channel |
| Brightness |
400 nits (cd/m2) |
| Contrast |
300:1 |
| Backlight |
High bright LED |
| Viewing
angle |
±70° horizontal, +50°/-70°
vertical |
| Touch
screen |
Resistive membrane |
| Memory |
| SDRAM |
128 MB for graphics processing
8 MB for system use |
| Flash |
32 MB for project storage
16 MB for system use |
| Control — Ethernet
interface |
| Ethernet
control/communications port |
With base attached: 1 female RJ-45 connector
Without base: 1 RJ-45 male connector on a pigtail |
| Ethernet
data rate |
10/100Base-T, half/full duplex with
autodetect |
| Ethernet
protocol |
ICMP, IP, TCP (control), UDP, DHCP,
Telnet |
| Default
settings |
Link speed and duplex level: autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off |
| Program
control |
Extron Global Configurator 3.0 or higher
GUI Configurator v1.0 or higher for
Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver.
6 or higher, Telnet |
| Control — touch screen |
| Motion
sensor |
On/off |
| Light
sensor |
On/off |
| External
buttons |
10 backlit, dual color (white, blue), field
labelable |
| Video input — see S-video or composite
video MTP transmitters' specifications |
| Number/signal
type |
1 S-video or composite video |
| Connectors |
With base attached: 1 female RJ-45 connector
Without base: 2 male BNC connectors on pigtails |
| Nominal
levels |
1 Vp-p for Y of S-video and for composite
video
0.3 Vp-p for C of S-video |
| Impedance |
75 ohms |
| Standards |
NTSC, PAL |
| Audio input — see S-video or composite
video MTP transmitters' specifications |
| NOTE |
Audio input is available only
from an Extron MTP transmitter through the RJ-45 connector in the
unit's base. If the base is removed from the TLP 700TV, connections
are via BNC connectors, and there is no audio input. |
|
| Number/signal
type |
1 stereo, balanced/unbalanced, line level, as
part of a set of proprietary signals from an Extron MTP |
| Connector |
1 female RJ-45 (shared with video
input) |
| Audio output |
| Speaker
output |
1 mono, 80 dB SPL, 0.1 watt, 0.1 m, half
space |
| Frequency
response |
500 Hz to 16 kHz, ±5 dB |
| Playback
format(s) |
WAV files: 8 bit PCM, mono, 8 kHz
sampling |
| General |
| Power
supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
| Power
input requirements |
+12 VDC, 0.75 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C)
/ 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
| Cooling |
Convection, vents on top rear |
| Mounting |
|
| Furniture
or wall mount |
Set on tabletop or mount to optional VESA D
75 mm panel mount kit |
| Adjustment
ranges |
Tilts through a 45° range |
| Enclosure
type |
Plastic |
| Enclosure
dimensions |
7.7" H* x 9.4" W x 8.2" D
(19.6 cm H* x 23.9 cm W x 20.7 cm D)
(*Maximum height. Includes base. Total height and depth depends on
screen tilt.) |
| |
|
| Product
weight |
3.8 lbs (1.7 kg) |
| Shipping
weight |
7 lbs (3 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit
Association) |
| Regulatory
compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES,
VCCI |
| Environmental |
Complies with the applicable requirements of RoHS
and WEEE. |
| Warranty |
3 years parts and labor; touchscreen display and
overlay components are covered for 1 year |
| NOTE |
All nominal levels are at
±10%. |
|