| The Extron IPCP Pro 350 is a
versatile, high-performance control processor designed for
centralized AV control in mid-sized applications. As part of the IP
Link® Pro Series, the IPCP Pro 350 is engineered to be faster
and more secure in almost every way. It features advanced security
standards and Gigabit Ethernet, which ensures compatibility with
multiple TouchLink® Pro touchpanels using today’s
network infrastructure. It also supports Extron LinkLicense™
which enables the use of third party devices as primary control
interfaces. The IPCP Pro 350 is an ideal choice for controlling
multiple devices and signal types within an AV
system. |
• Supports
TouchLink Pro touchpanels
• Supports secure industry standard communications protocols
— All IP Link Pro models use industry standard communication
protocols, including HTTP (insecure), HTTPS, SSH, SFTP, SMTP, NTP,
Discovery Service, DHCP, DNS, ICMP, and IPv4.
• Supports LinkLicense — Enables the use of third party
devices as primary control interfaces.
• Two bidirectional RS-232 serial ports with software
handshaking — Captive screw serial ports that can control two
RS-232 devices.
• One bidirectional RS-232/RS-422/RS-485 serial port with
hardware and software handshaking — Captive screw serial port
that can communicate with one RS-232/RS-422/RS-485 serially
controlled device.
• Two IR/Serial ports for one-way control of external
devices
• Four Digital I/O ports — Allows for interfacing with
other systems in the room.
• Four relays for controlling room functions — Enables
control of lighting, screen settings, and other device
functions.
• Ethernet monitoring and control — Manage, monitor,
and control AV devices using a standard Ethernet network.
• Supports popular BMS – Building Management System
protocols, such as BACnet, KNX, and DALI — These protocols
allow for centralized monitoring and control of mechanical and
electrical systems that include HVAC, lighting, power, fire, and
security.
• Integrated three port network switch — Allows for
easy connection of touchpanels or other network controlled
devices.
• Supports 10/100/1000Base-T
• Supports Ethernet-controllable devices — Allows for
control of multiple Ethernet-enabled AV devices such as displays,
switchers, and sources.
• Integrated IR Learning capability — Captures IR
remote codes from a device’s handheld remote control.
• Automatic clock synchronization allows touchpanel to
display the accurate time and date
• Supports control system synchronization —
Synchronization will allow users to retain and recover the state of
their configured endpoints in case of network or power failure.
• Front panel port status indicators
• Multi-level password protection — Allows security to
be set based on user roles.
• Fully customizable using Extron control system software
— GUI Designer combined with Global Configurator Plus or
Global Configurator Professional.
• Library of enhanced Extron Certified device drivers —
Device drivers allow Extron products to control various display and
source devices, such as projectors, flat-panel displays, and
Blu-ray players. Extron has produced fully tested Ethernet, serial,
and IR device drivers.
• 1U, half rack width metal enclosure
• Highly reliable, energy-efficient external universal power
supply included |
| Memory |
|
SDRAM |
512 MB |
|
Flash |
4.5 GB |
| Software and control options |
|
Software |
Extron Global Configurator Plus and
Professional for Windows® |
|
Control
options |
GlobalViewer®,
TouchLink® for Web, TouchLink for
iPad®, or TouchLink Pro touchpanels |
| Ethernet control |
|
Network interface
controllers (NICs) |
1 |
|
Network
switch |
1 unmanaged 3 port
switch |
|
Connectors |
3 female RJ-45
connectors |
|
Data
rate |
10/100/1000Base-T, half/full duplex
with autodetect |
|
Protocols |
DHCP, DNS, HTTP, HTTPS, ICMP, NTP,
SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP |
|
Default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1 |
| Serial control |
|
Quantity/type |
1 bidirectional RS-232, RS-422,
RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3) |
|
Connectors |
(1) 3.5 mm captive screw connector,
5 pole
(2) 3.5 mm captive screw connectors, 3 pole |
|
Baud rate and
protocol |
300 to 115200 baud (9600 baud =
default); 8 (default) or 7 data bits; 1 (default) or 2 stop
bits;
no parity (default), even, odd, mark, or space
parity |
| NOTE |
The 5-pole ports support both hardware and
software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow
control. |
|
|
Pin
configurations |
|
|
Serial, 5-pole
captive screw |
|
RS-232
(default) |
Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 =
RTS, 5 = CTS |
|
RS-422 |
Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 =
Tx+, 5 = Rx+ |
|
RS-485 |
Pins 1 and 2 (tied together) =
data-, 3 = Gnd, 4 and 5 (tied together) = data+ |
|
Serial,
3-pole captive screw |
Pin 1 = Tx, 2 = Rx, 3 =
Gnd |
| Digital I/O control |
|
Quantity/type |
4 digital input/output
(configurable) |
|
Connectors |
(1) 3.5 mm captive screw connector,
5 pole |
|
Digital
inputs |
|
|
Input
voltage range |
0 to 24 VDC, clamped at +30
VDC |
|
Input
impedance |
29k ohms |
|
Programmable
pullup |
1k ohms to +5 VDC |
|
Threshold
low to high |
>2.8 VDC |
|
Threshold
high to low |
<2.0 VDC |
|
Digital
outputs |
250 mA sink from 24 VDC
max. |
|
Pin
configurations |
1, 2, 3, 4 = digital I/Os 1, 2, 3,
4; 5 = Gnd |
| IR/serial control |
|
Quantity/type |
2 programmable: unidirectional
RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and
non-carrier) up to 300 kHz |
|
Connector |
(1) 3.5 mm captive screw connector,
5-pole |
|
Baud rate and protocol
(RS-232) |
300 to 115200 baud (9600 baud =
default); 8 (default) or 7 data bits; 1 (default) or 2 stop
bits;
no parity (default), even, odd, mark, or space
parity |
|
Pin
configurations |
For each port, pin 1 = signal,
2 = Gnd |
|
IR output carrier
frequency |
30 kHz to 300 kHz |
|
IR learning carrier
frequency |
30 kHz to 300 kHz |
|
IR learning capture
distance |
2" (5.1 cm) to 12" (30.5 cm) from
the front panel |
| Relay control |
|
Quantity/type |
4 normally open
relays |
|
Relay control
connectors |
(1) 3.5 mm captive screw connector,
6 pole |
|
Relay control contact
rating |
24 VDC, 1 A |
| General |
|
Power
supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
|
Power input
requirements |
12 VDC, 1 A, 12 watts,
max. |
|
Power
consumption |
|
|
Device |
9.8 watts, 12 VDC |
|
Device
and power supply |
11.9 watts, 100-240 VAC, 50-60
Hz |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to
+70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal
dissipation |
|
|
Device |
12.9 BTU/hr |
|
Device
and power supply |
19.9 BTU/hr |
|
Mounting |
|
|
Rack
mount |
Yes, with optional 1U rack
shelf |
|
Enclosure
type |
Metal |
|
Enclosure
dimensions |
1.7" H x 8.7" W x 10.5" D (1U high,
half rack wide)
(4.3 cm H x 22.1 cm W x 26.7 cm D)
(Depth excludes connectors.) |
|
Product
weight |
1.4 lbs (0.6 kg) |
|
Shipping
weight |
4 lbs (2 kg) |
|
DIM
weight |
7 lbs (3 kg) |
|
Vibration |
ISTA 1A in carton (International
Safe Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL
UL Listed for use in plenum air handling spaces: meets UL 2043 for
heat and smoke release; meets UL 60950 for safety. |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, KCC,
VCCI |
|
Environmental |
Complies with the appropriate
requirements of RoHS, WEEE |
|
Warranty |
3 years parts and
labor |
| NOTE |
All
nominal levels are at ±10%. |
|
|
| |
|
|
