| The Extron IPL Pro S3 is a
compact, high-performance control processor with three
bidirectional serial ports. As with all IP Link Pro control
processors, the IPL Pro S3 combines more power, speed and memory.
It features advanced security standards and Gigabit Ethernet, which
ensures compatibility with multiple TouchLink Pro touchpanels using
today’s network infrastructure. It is designed to be used as
a stand-alone control processor in smaller systems configured with
Global Configurator Plus or Professional. It may also be grouped
with an IPCP Pro control processor in more complex systems
configured with Global Configurator Professional. |
• Supports
TouchLink® Pro touchpanels
• Supports secure industry standard communications protocols
— All IP Link Pro models use industry standard communication
protocols, including HTTP (insecure), HTTPS, SSH, SFTP, SMTP, NTP,
Discovery Service, DHCP, DNS, ICMP, and IPv4.
• Two bidirectional RS-232 serial ports with hardware and
software handshaking — Captive screw serial ports that can
control two RS-232 devices.
• One bidirectional RS-232/RS-422/RS-485 serial port with
hardware and software handshaking — Captive screw serial port
that can communicate with one RS-232/RS-422/RS-485 serially
controlled device.
• Supports popular BMS – Building Management System
protocols, such as BACnet, KNX, and DALI — These protocols
allow for centralized monitoring and control of mechanical and
electrical systems that include HVAC, lighting, power, fire, and
security.
• Ethernet monitoring and control — Manage, monitor,
and control AV devices using a standard Ethernet network.
• Power over Ethernet allows the control processor to receive
power and control over a single Ethernet cable, eliminating the
need for a local power supply
• Supports 10/100/1000Base-T
• Supports Ethernet-controllable devices — Allows for
control of multiple Ethernet-enabled AV devices such as displays,
switchers, and sources.
• Automatic clock synchronization allows touchpanel to
display the accurate time and date
• Supports control system synchronization —
Synchronization will allow users to retain and recover the state of
their configured endpoints in case of network or power failure.
• Front panel port status indicators
• Multi-level password protection — Allows security to
be set based on user roles.
• Fully customizable using Extron control system software
— GUI Designer combined with Global Configurator Plus or
Global Configurator Professional.
• Library of enhanced Extron Certified device drivers —
Device drivers allow Extron products to control various display and
source devices, such as projectors, flat-panel displays, and
Blu-ray players. Extron has produced fully tested Ethernet, serial,
and IR device drivers
• 1U, quarter rack width metal enclosure
• Plenum rated - meets UL 2043 for heat and smoke release,
excluding power supply
• Highly reliable, energy-efficient external universal power
supply included |
| Memory |
|
SDRAM |
512 MB |
|
Flash |
512 MB |
| Software and control options |
|
Software |
Extron Global Configurator Plus and
Professional for Windows® |
|
Control
options |
GlobalViewer®,
TouchLink® for Web, TouchLink for
iPad®, or TouchLink Pro touchpanels |
| Ethernet control |
|
Network interface
controllers (NICs) |
1 |
|
Connectors |
1 female RJ-45
connector |
|
Data
rate |
10/100/1000Base-T, half/full duplex
with autodetect |
|
Protocols |
DHCP, DNS, ICMP (ping), HTTP, HTTPS,
NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP |
|
Default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1 |
| Serial control |
|
Quantity/type |
1 bidirectional RS-232, RS-422,
RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3) |
|
Connectors |
(3) 3.5 mm captive screw connectors,
5 pole |
|
Baud rate and
protocol |
300 to 115200 baud (9600 baud =
default); 8 (default) or 7 data bits; 1 (default) or 2 stop
bits;
no parity (default), even, odd, mark, or space
parity |
| NOTE |
These ports support both hardware and software
flow control. The default is no flow control. |
|
|
Pin
configurations |
|
|
Serial, 5-pole
captive screw |
|
RS-232
(default) |
Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 =
RTS, 5 = CTS |
|
RS-422 |
Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 =
Tx+, 5 = Rx+ |
|
RS-485 |
Pins 1 and 2 (tied together) =
data-, 3 = Gnd, 4 and 5 (tied together) = data+ |
| General |
|
Power
supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
|
Power input
requirements |
12 VDC, 1 A, 12 watts, max.
Or power over Ethernet (PoE) (complies with PoE 802.3af, class
3) |
|
Power
consumption |
|
|
Device |
2.0 watts, 12 VDC |
|
Device
and power supply |
2.6 watts, 100-240 VAC, 50-60
Hz |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to
+70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal
dissipation |
|
|
Device |
6.8 BTU/hr |
|
Device
and power supply |
8.7 BTU/hr |
|
Mounting |
|
|
Rack
mount |
Yes, with optional 1U rack shelf or
back of the rack mounting kit |
|
Furniture
mount |
Yes, with optional bracket
kit |
|
Enclosure
type |
Metal |
|
Enclosure
dimensions |
1.7" H x 4.3" W x 6.0" D (1U high,
quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.) |
|
Product
weight |
0.8 lbs (0.4 kg) |
|
Shipping
weight |
2 lbs (1 kg) |
|
Vibration |
ISTA 1A in carton (International
Safe Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL
UL Listed for use in plenum air handling spaces: meets UL 2043 for
heat and smoke release; meets UL 60950 for safety. |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, KCC,
VCCI |
|
Environmental |
Complies with the appropriate
requirements of RoHS, WEEE |
|
Warranty |
3 years parts and
labor |
| NOTE |
All nominal levels are at
±10%. |
|
|
| |
|
|
