| The IPL T PCS4 Four Port Power
Control and Current Sensor offers centralized power management for
up to four AC outlets. The IPL T PCS4 features four 120VAC Edison
outlets with a maximum 10 amp load and integrates Ethernet
technology into systems, enabling flexible, centralized, Web-based
power and device management. |
• Four female
Edison A/C outlets
• Remote on/off control of individual AC power outlets
— Individual AC outlets can be turned ON or OFF from any
Web-browser by an administrator and scheduled for automatic
powering ON and OFF daily. Users can view the real time status and
current schedule for all connected devices. Monitoring AV device
status with intelligent sensing capabilities provides proactive
maintenance and service capabilities.
• Intelligent current sensing with alarm thresholds —
User defined thresholds can be set for specific AV devices denoting
full power consumption, standby status or an off and physically
disconnected state. Administrators can monitor AV systems for
conditions or events that are inappropriate, such as unwanted power
down situations or unplanned disconnected products.
• Power up sequencing — Prevents an in-rush power
overload. In the event of power loss and restart, power outlet
receptacles can be powered on sequentially with a user-configurable
delay between each one. The power up sequencing feature precludes
all outlets from powering-on at once, averting a power overload
spike and a blown fuse or tripped circuit breaker.
• Outlet grouping — Allows two or more receptacles to
be linked so that power can be cycled to them simultaneously with
one command. This feature works well for computer workstations and
other equipment with two or more AC requirements.
• Front panel security lockout — If used in an
unsecured environment where easy access is undesirable, a security
lock-out feature may be implemented. During lock-out mode, a
special button combination is required to operate the front
panel.
• Outlet status retention during power loss — The
internal memory of the IPL T PCS4 is unaffected with power loss,
ensuring that only those devices that were on before the outage
will be restarted. In addition, configured outlet grouping,
thresholds, and all other user defined settings are retained in the
event of power outage.
• Contact closure alarm port — Alarm conditions can
actuate a contact closure based on user defined parameters. This is
useful for simple alarm notification and diagnostic applications
where an enhanced control system is not present.
• Integrated high performance Web server — The IPL T
PCS4 features a built-in Web server with memory available for
storing device drivers, GlobalViewer, and custom user Web
pages.
• 7.25 MB of available flash memory
• Supports industry standard communications protocols —
All IP Link models use industry standard communication protocols,
including ARP, ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, and
Telnet.
• Simultaneous multi-user support — Each IP Link device
supports multiple concurrent users, improving system
throughput.
• Multiple levels of access with password protection —
User access level authorizes limited entry to only pre-designated
functions, while administrator access level permits full access to
advanced settings.
• Free, easy-to-use Global Configurator software —
Global Configurator software, a free Windows® based
configuration utility, makes product setup simple and intuitive
– no programming knowledge is required.
• Free GlobalViewer® Web-based AV resource management
application — When used with GlobalViewer, IP Link control
processors provide a powerful, flexible way to manage, monitor, and
control both Extron and third-party equipment like projectors,
plasmas, monitors, VCRs, DVD players, and other devices using a
standard TCP/IP network. |
| Ethernet control interface |
|
Connectors |
1 female RJ-45 female
connector |
|
Data
rate |
10/100Base-T, half/full duplex with
autodetect |
|
Protocols |
ARP, ICMP (ping), IP, TCP, UDP,
DHCP, HTTP, SMTP, Telnet |
|
Default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
|
Web
server |
Up to 200 simultaneous sessions
960 kB nonvolatile user memory |
|
Program
control |
Extron Simple Instruction Set
(SIS™) |
|
Global Viewer
requirements |
Microsoft® Internet Explorer
ver. 6 or higher |
| AC control interface |
|
Connectors |
|
|
IPL T
PCS4 |
4 USA/Edison power
connectors |
|
IPL T
PCS4i |
4 IEC power
connectors |
|
Voltage |
|
|
IPL T
PCS4 |
120 VAC, 50-60 Hz |
|
IPL T
PCS4i |
220 VAC, 50-60 Hz |
|
Minimum AC
load |
|
|
IPL T
PCS4 |
20 mA, 2.4 watts at 120
VAC |
|
IPL T
PCS4i |
20 mA, 4.4 watts at 220
VAC |
|
Maximum AC load,
aggregate |
|
|
IPL T
PCS4 |
10 A, 1200 watts at 120
VAC |
|
IPL T
PCS4i |
10 A, 2200 watts at 220
VAC |
|
Maximum AC load,
individual |
|
|
IPL T
PCS4 |
10 A, 1200 watts at 120
VAC |
|
IPL T
PCS4i |
10 A, 2200 watts at 220
VAC |
|
Current
sense |
|
|
Range |
5 mA to 10 A |
|
Resolution |
0.1 mA steps from 5 mA to 99.9
mA
1 mA steps from 100 mA to 999 mA
10 mA steps from 1 A to 10 A |
|
Tolerance |
±20% |
| Alarm relay control |
|
Quantity/type |
1 normally open
relay |
|
Connector |
(1) 3.5 mm captive screw connector,
2 pole |
|
Contact
rating |
24 V, 1 A |
| General |
|
Power
input |
|
|
IPL T
PCS4 |
Internal
120 VAC, 50-60 Hz
15 watts |
|
IPL T
PCS4i |
Internal
220 VAC, 50-60 Hz
15 watts |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to
+70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
|
Cooling |
Convection, no vents |
|
Mounting |
|
|
Rack
mount |
Yes, with optional 1U rack
shelf |
|
Furniture
mount |
Yes, under-furniture mountable with
optional mounting kit |
|
Enclosure
type |
Metal |
|
Enclosure
dimensions |
1.7" H x 8.7" W x 9.5" D (1U high,
half rack wide)
(4.3 cm H x 22.0 cm W x 24.1 cm D)
(Depth excludes connectors.) |
|
Product
weight |
2.6 lbs (1.2 kg) |
|
Shipping
weight |
5 lbs (3 kg) |
|
Vibration |
ISTA 1A in carton (International
Safe Transit Association) |
|
Regulatory
compliance |
|
|
Safety |
|
|
IPL
T PCS4 |
CE, c-UL, UL |
|
IPL
T PCS4i |
CE |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES,
VCCI |
|
Warranty |
3 years parts and
labor |
| NOTE |
All nominal levels are at
±10%. |
|
|
| |
|
|
