| The Extron IPL T CR48 is a
compact IP Link® control processor with integrated Web server,
four contact input ports, and eight relays. It is designed to
integrate IP - Internet Protocol connectivity into AV systems for
Web-based remote control of screens, timers, lights, motion
sensors, and more. Four contact inputs, TTL only, and eight
normally open relays offer the ability to control a wide variety of
products in an AV presentation environment. |
• Supports
TouchLink® touchpanels
• Eight normally open relays, 24 VDC, 1A
• Four contact inputs, TTL only
• Controls screens, timers, lights, and more
• Supports Ethernet-controllable devices — Allows for
control of up to six Ethernet-enabled AV devices such as displays,
switchers, and sources
• Integrated high performance Web server — Each IP Link
control processor features a built-in Web server with memory
available for storing device drivers, GlobalViewer, and custom user
Web pages.
• Supports industry standard communications protocols —
All IP Link models use industry standard communication protocols,
including ARP, ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, and
Telnet.
• E-mail notification enables proactive support —
Technical support administrators and others can receive failure and
service messages through an e-mail enabled cell phone, PDA,
pager, or Internet e-mail account.
• Multiple levels of access with password protection —
User access level authorizes limited entry to only pre-designated
functions, while administrator access level permits full access to
advanced settings.
• Simultaneous multi-user support — Each IP Link device
supports multiple concurrent users, improving system
throughput.
• Free GlobalViewer®, Web-based AV resource management
application — When used with GlobalViewer, IP Link control
processors provide a powerful, flexible way to manage, monitor, and
control both Extron and third-party equipment like projectors,
plasmas, monitors, VCRs, DVD players, and other devices using a
standard TCP/IP network.
• Free Global Configurator, easy-to-use configuration
software — Global Configurator software, a free Windows®
based configuration utility, makes product setup simple and
intuitive – no programming knowledge is required.
• LED status indicators monitor activity of the device
• Internal real-time clock — Programmable operating
alerts, sequencing, and automatic monitoring, together with the
real-time clock and calendar, allow IP Link control processors to
routinely check configured devices.
• Reset button
• 1U, one-quarter rack width enclosure
• Plenum rated - meets UL 2043 for heat and smoke release,
excluding power supply
• Highly reliable, energy-efficient external universal power
supply included |
| Ethernet control interface |
|
Connectors |
1 RJ-45 female
connector |
|
Data
rate |
10/100Base-T, half/full duplex with
autodetect |
|
Protocols |
ARP, ICMP (ping), IP, TCP, UDP,
DHCP, HTTP, SMTP, Telnet |
|
Default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
|
Web
server |
Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory |
|
Program
control |
Extron Simple Instruction
Set™ (SIS™) |
|
Global Viewer
requirements |
Microsoft® Internet
Explorer® ver. 6 or higher |
| Relay control interface |
|
Quantity/type |
8 normally open
relays |
|
Relay control
connectors |
(2) 3.5 mm captive screw connectors,
8 pole |
|
Relay control contact
rating |
24 V, 1 A |
| Contact closure control
interface |
|
Quantity/type |
4 contact closure
inputs |
|
Contact input control
connector |
(1) 3.5 mm captive screw connector,
5 pole |
|
Contact closure (input
only) |
|
|
Input
voltage range |
0 to 5 VDC, clamped at +5.1
V |
|
Input
impedance |
10k ohms |
|
Threshold |
1.6 VDC |
|
Pin
configurations |
1, 2, 3, 4 = inputs 1, 2, 3, 4; 5 =
GND |
| General |
|
Power |
Supplied by an included external
power supply |
|
External power
supply |
100 VAC to 240 VAC, 50-60 Hz,
external; to 12 VDC, 1 A, regulated |
|
Power input
requirements |
12 VDC, 0.5 A |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to
+70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
|
Cooling |
Convection, no vents |
|
Mounting |
|
|
Rack
mount |
Yes, with optional 1U rack
shelf |
|
Furniture
mount |
Yes, with optional under desk
mounting kit |
|
Pole
mount |
Yes, with optional mini pole mount
kit |
|
Enclosure
type |
Metal |
|
Enclosure
dimensions |
1.7" H x 4.3" W x 3.0" D (1U high,
quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
|
Product
weight |
0.7 lbs (0.3 kg) |
|
Shipping
weight |
2 lbs (1 kg) |
|
Vibration |
ISTA 1A in carton (International
Safe Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and
smoke release, excluding the power supply; meets UL 60950 for
safety. |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES,
VCCI |
|
Warranty |
3 years parts and
labor |
| NOTE |
All nominal levels are at
±10%. |
|
|
| |
|
|
