| The Extron IPL T SFI244 is a
compact IP Link® control processor with an integrated high
performance Web server, two RS-232 ports, four Flex I/O ports, four
IR ports, and an IR Learner. The IPL T SFI244 is designed to
integrate IP - Internet Protocol connectivity into AV systems,
giving users the ability to remotely and proactively monitor and
troubleshoot projectors, flat-panel displays, switchers, and other
products. |
• Ethernet
monitoring and control
• Supports TouchLink® touchpanels
• Two bidirectional RS-232 serial ports — For remotely
and proactively monitoring and troubleshooting projectors,
flat-panel displays, switchers, and other serially controlled
devices.
• Four IR ports — Allow users to control professional
and consumer devices that are controllable only through IR, such as
DVD players.
• Four Flex I/O ports — Can be configured as analog
inputs, digital inputs, or digital outputs and can interface with a
variety of devices such as sensors, switches, LEDs, and relays.
• Serial port pass-through — Enables commands to be
passed through from one serial port to another to control a single
device.
• Supports Ethernet-controllable devices — Allows for
control of up to six Ethernet-enabled AV devices such as displays,
switchers, and sources
• Free Global Configurator, easy-to-use configuration
software — Global Configurator software, a Windows®
based configuration software, makes product setup simple and
intuitive – no programming knowledge is required.
• Extensive library of Extron Certified device drivers
— Device drivers allow Extron products to control various
display and source devices, such as projectors, flat-panel
displays, and DVD players. Extron has produced thousands of fully
tested and uniformly modeled RS-232 and IR device drivers.
• Integrated IR learner — For capturing IR remote codes
from a device's handheld remote control.
• Integrated high performance Web server — Each IP Link
control processor features a built-in Web server with memory
available for storing device drivers, GlobalViewer, and custom user
Web pages.
• Supports industry standard communications protocols —
All IP Link models use industry standard communication protocols,
including ARP, ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, and
Telnet.
• E-mail notification enables proactive support —
Technical support administrators and others can receive failure and
service messages through an e-mail enabled cell phone, PDA, pager,
or Internet e-mail account.
• Multiple levels of access with password protection —
User access level authorizes limited entry to only pre-designated
functions, while administrator access level permits full access to
advanced settings.
• Free GlobalViewer®, Web-based AV resource management
application — When used with GlobalViewer, IP Link control
processors provide a powerful, flexible way to manage, monitor, and
control both Extron and third-party equipment like projectors,
plasmas, monitors, VCRs, DVD players, and other devices using a
standard TCP/IP network.
• Internal real-time clock — Programmable operating
alerts, sequencing, and automatic monitoring, together with the
real-time clock and calendar, allow IP Link control processors to
routinely check configured devices.
• 7.25 MB of available flash memory
• Simultaneous multi-user support — Each IP Link device
supports multiple concurrent users, improving system
throughput.
• Plenum rated - meets UL 2043 for heat and smoke release,
excluding power supply
• Highly reliable, energy-efficient external universal power
supply included |
| Ethernet control interface |
|
Connectors |
1 female RJ-45
connector |
|
Data
rate |
10/100Base-T, half/full duplex with
autodetect |
|
Protocols |
ARP, ICMP (ping), IP, TCP, UDP,
DHCP, HTTP, SMTP, Telnet |
|
Default
settings |
Link speed and duplex level =
autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
|
Web
server |
Up to 200 simultaneous
sessions |
|
IPL T
SFI244 |
7.25 MB nonvolatile user
memory |
|
Program
control |
Extron Simple Instruction Set
(SIS™) |
|
Global Viewer
requirements |
Microsoft® Internet
Explorer® ver. 6 or higher |
| Serial control interface |
|
Quantity/type |
2 RS-232 only |
|
Connector |
(1) 3.5 mm captive screw connector,
5 pole |
|
Baud rate and
protocol |
300 to 115200 baud
Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit,
no parity |
|
Pin
configurations |
COM1: pin 1 = TX, 2 = RX, 3 =
GND
COM2: pin 4 = TX, 5 = RX, 3 = GND |
| Flex I/O control interface |
|
Quantity/type |
4 analog input or digital
input/output(configurable) |
|
Connectors |
(1) 3.5 mm captive screw connector,
5 pole |
|
Digital
inputs |
|
|
Input
voltage range |
0 to 24 VDC, clamped at +30
VDC |
|
Input
impedance |
28k ohms |
|
Programmable
pullup |
2k ohms to +5 VDC |
|
Threshold
low to high |
Programmable range: 100 mV to 24
VDC, default = 2 VDC |
|
Threshold
high to low |
Programmable range: 100 mV to 24
VDC, default = 1 VDC |
|
Digital
outputs |
250 mA sink from 24 VDC
max. |
|
Analog
inputs |
12 bit A/D, 0 to 24
VDC |
|
Pin
configurations |
1, 2, 3, 4 = digital I/Os 1, 2, 3,
4; 5 = GND |
| IR control interface |
|
Quantity/type |
4 IR |
|
Connectors |
(1) 3.5 mm captive screw connector,
8 pole |
|
IR output carrier
frequency |
30 kHz to 1 MHz |
|
Pin
configurations |
Pins 1, 3, 5, 7 = S 1, S2, S3,
S4
Pins 2, 4, 6, 8 = GND |
|
IR learning carrier
frequency |
30 kHz to 1 MHz |
|
IR learning capture
distance |
2" (5.1 cm) to 12" (30.5 cm) from
the front panel |
| General |
|
Power |
Supplied by an included external
power supply |
|
External power
supply |
100 VAC to 240 VAC, 50-60 Hz,
external; to 12 VDC, 1 A, regulated |
|
Power input
requirements |
12 VDC, 0.5 A |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to
+70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing |
|
Cooling |
Convection, no vents |
|
Mounting |
|
Rack
mount |
Yes, with optional 1U rack
shelf |
|
Furniture
mount |
Yes, with optional under-desk
mounting kit |
|
Pole
mount |
Yes, with optional mini pole mount
kit |
|
Enclosure
type |
Metal |
|
Enclosure
dimensions |
1.7" H x 4.3" W x 3.0" D (1U high,
quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
|
Product
weight |
0.7 lbs (0.3 kg) |
|
Shipping
weight |
2 lbs (1 kg) |
|
Vibration |
ISTA 1A in carton (International
Safe Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and
smoke release, excluding the power supply; meets UL 60950 for
safety |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES,
VCCI |
|
Warranty |
3 years parts and
labor |
| NOTE |
All nominal levels are at
±10%. |
|
|
| |
|
|
