Clear-Com WTR-680

WTR-680

Clear-Com WBS UHF Beltpack

Clear-Com WTR-680

Read our blog, or visit our new site
Home > Clear-Com > Wireless > WBS UHF Intercom > WTR-680  
 Clear-Com WTR-680 2-channel frequency UHF wireless beltpack

Clear-Com WTR-680
Product Code: WTR680
Buy Sell Sales Clear-Com WTR-680

review button
 


The WTR-680 beltpacks offer advanced features such as the Wireless- Talk-Around (WTA) and Stage Announce (SA) which provide added flexibility and expands the control of the mobile user.
Specifications of WTR-680
 
BELTPACK
RF Frequency Range: 518 - 608 MHz, 614 - 686 MHz in 18 MHz TX and RX bands
 
Power Requirement: 6 Alkaline “AA” Cells (NiMH optional)
 
Typical Battery Life Alkaline: 14 Hours (Continuous duty with talk light on)
 
Typical Battery Life - Nickel Metal Hydride (1500 mAh): 11 Hours (Continuous duty with talk light on)
 
Current Draw: 140 mA (Push-to-Talk, Talk On)
 
Temperature Range: -4oF to 140oF (20oC to 55oC)
 
Dimensions: 3.75” W x 5.05” H x 1.65” D (9.5 cm x 12.8 cm x 4.2 cm)
 
Weight: 16 oz. (0.454 kg) with batteries 15 oz. (0.425 kg) with batteries
 
Transmit Antenna: 1/4 Wave (supplied), Screw type
 
Receiver Antenna: 1/4 Wave (supplied), Screw type
 
FCC ID: B5DM515
 
Frequency Response: 300 Hz - 8,000 Hz
 
Four-Wire Input: N/A
 
Four-Wire Output: N/A
 
Clear-Com® Party-line Levels: N/A
 
RTS® Party-line Levels: N/A
 
Telex® Party-line Levels: N/A
 
Auxiliary Input: N/A
 
Auliliary Output: N/A
 
 
TRANSMITTER
Type: Synthesized, 720 channels
 
Transmit Power: WTR-680/WTR-670: 50 mW max. (auto-power reduction when close to base)
 
RF Frequency Stability:  0.005%
 
Modulation: FM, 40 KHz Deviation
 
Modulation Limiter: Peak-Responding Compressor
 
Modulation Frequency Range: 300 Hz -8,000 Hz +-2 dB
 
Microphone Audio Input: 30 W - 3,500 W
 
Microphone Input Sensitivity: 9 mV
 
Radiated Harmonics & Spurious: Exceeds FCC specifications
 
FCC Acceptance: Type accepted under FCC Part 74
 
 
RECEIVER
Type: Dual Conversion Super heterodyne, Synthesized, FM, 720 channels
 
RF Sensitivity: <0.7 mV for 12 dB SINAD
 
Signal-to-Noise Ratio: 95 dB
 
IF Selectivity: 3 dB at 230 KHz
 
Image Rejection: 70 dB or better
 
Squelch Quieting: 95 dB
 
RF Frequency Stability: 0.005%
 
Distortion: <1% at full deviation
 
Local Headset Output: 40mW output into 600 W (1% distortion)
 
FCC Acceptance: Notification under FCC Part 15
 

 

Clear-Com

Wired Intercom

Wireless Intercom

Base Stations

FSE BASE
MB-100
MB340ES
BS-121
BS-210
BS-410

Beltpacks

FSE-BP50
FSII-BP19
FSII-BP24
FSII-BP19-O2
FSII-BP24-O2
BP-200
BP-210
BP-340
BP-410

Headsets

WH220

WH340
WH410

System Sets

HME DX100

HME DX121
HME DX210
HME DX410

Splitter & Transceiver

FSII-SPL
FSII-TCVR-19
FSII-TCVR-IP-19
Intercom Headsets
Intercom Microphones

Accessories

email us

Contact us