Clear Com CellCom Beltpack

CellCom Beltpack

Clear-Com Beltpack

Clear Com CellCom Beltpack

Read our blog, or visit our new site
Home > Clear-Com > Wireless > CellCom > CellCom Beltpack (Discontinued)  
 CellCom 1.8GHz-1.9GHz band digital wireless Mark II beltpack

Clear-Com CellCom Beltpack
Product Code: CellComBeltpack
Discontinued
review button
 


1.8GHz-1.9GHz Band Digital wireless Beltpack with 2 talk and listen keys with integral crosspoint level rotary controls and Answerback/Menu key. LED level and call signalisation and LCD menu. XLR-4M headset connector, PC set-up and DC charging connections included. Comes with single AC charger.

The CellCom wireless beltpack is a feature-rich unit that can be programmed to meet the user’s needs. Two push-to-talk rotary encoders and multi-page display allow up to twelve communication routes to be assigned to each beltpack. These can be any desired combination of group and point-to-point communication assignments. All twelve communication routes may be used simultaneously.

CellCom beltpacks bring audio clarity to users’ ears with full duplex 7 kHz "commentator" bandwidth. This level of audio quality reduces the strain on the users’ ears and improves work flow by reducing the need to repeat messages. The cellular roaming technology used in CellCom continually scans for the best available active antennas to connect with and automatically switches seamlessly to offer unbroken coverage.
 
Specifications of Cellcom BeltPack
Audio Bandwidth: 200 Hz - 7.5KHz (G.722)
 
No. of Pages: 3
 
No. of Full-Duplex Audio Paths: Up to 6 with individual level control (3 pairs)
 
Mode of Operation: Full Duplex on all routes
 
Level/Talk Controls: 2 top-mounted push-totalk rotary encoders
 
“Page” / Menu Scroll Buttons: 2
 
Enter / Answer-Back Button: 1
 
Frequency Spectrum: 1.88GHz – 1.93GHz DECT Cellular auto roaming technology
 
RF Output: 200mW Burst, 17mW average
 
Range: Up to 800ft (50 - 150m typical) in good radio frequency conditions
 
Battery: 4 AA alkaline cells, Rechargeable: 4 AA NiMH cells
 
Battery Charging: In unit, via external power supply connected to beltpack
 
Battery Life: 8 - 10 hours with 4 x Ni-MH – also accepts 4 x Alkaline AA cells
 
Headset Connector: 4-pin male, Clear-Com standard
 
Microphone Type: Electret and Dynamic, selectable in beltpack menu
 
Microphone Level and Headset Limiter: Selectable in beltpack menu
 
Headset Limiter: Selectable from beltpack menu
 
Environmental: -67o F to +158o F (-55o C to +70o C)
 
Dimensions: Tapered design at largest points approx. 1.5 x 3.5 x 5.75 in (38 x 87 x 144 mm) (dwh)
 
Weight: 8.8 oz (0.25 kg) excluding batteries
12.4 oz (0.35 kg) including batteries
 

 

Clear-Com

Wired Intercom

Wireless Intercom

Base Stations

FSE BASE
MB-100
MB340ES
BS-121
BS-210
BS-410

Beltpacks

FSE-BP50
FSII-BP19
FSII-BP24
FSII-BP19-O2
FSII-BP24-O2
BP-200
BP-210
BP-340
BP-410

Headsets

WH220

WH340
WH410

System Sets

HME DX100

HME DX121
HME DX210
HME DX410

Splitter & Transceiver

FSII-SPL
FSII-TCVR-19
FSII-TCVR-IP-19
Intercom Headsets
Intercom Microphones

Accessories

email us

Contact us