| Extron XTP T USW 103 Three Input XTP Switcher with
Integrated XTP Transmitter |
Product Code:
XTPTUSW103
 |
The XTP T USW 103 is a
three-input switcher for sending HDMI or RGBHV video, audio,
control, and Ethernet up to 330 feet (100 meters) over a shielded
CATx cable. It is HDCP compliant, and supports 1080p/60 Deep Color
and 1920x1200 signals. The XTP® switcher digitizes incoming
analog video for reliable display on a variety of output devices.
The transmitter also allows Ethernet extension and insertion of
bidirectional RS-232 and IR for LAN access and AV device control at
remote locations. The XTP T USW 103 transmitter works with XTP
Systems® for signal distribution and long-distance
transmission between remote endpoints.
The XTP T USW 103 provides signal extension from up to three remote
sources for high performance transmission of video, audio, control,
and Ethernet over long distances. Analog signals are digitized to
ensure a high quality digital video signal is transmitted to the
output destination. To streamline operations, the transmitter
features auto-switching that allows for simple, unmanaged source
selection from within a lectern or under a table. Switching
priority is configurable when multiple inputs are active. This
three-input switcher is ideally integrated with XTP CP boards
mounted in an XTP CrossPoint® matrix switcher for complete
digital and analog signal extension over one shielded CATx cable
within an enterprise-wide distribution system.
The switcher allows the embedding of separate analog stereo audio
signals via a 3.5 mm TRS connector for extended transmission.
Embedding an audio signal into the output stream helps to reduce
the number of cable runs to the destination. The transmitter also
provides audio input gain and attenuation control plus volume
adjustment to manage the audio signals from the source endpoint.
These features enable the output volume level to be set,
eliminating noticeable volume differences when switching between
sources.
The XTP T USW 103 offers convenient source control options,
including front panel, RS-232, IR, and contact closure for input
selection. For installation flexibility, the transmitter also
provides an RS-232 and IR insertion port to enable bidirectional
control of an AV device using the same, single CATx cable. These
features simplify source management and integration with a control
system.
To further streamline system design, the transmitting switcher can
be powered by the matrix switcher over the same twisted pair cable
that transmits the AV and inserted signals. Additionally,
centralized 10/100 Ethernet communication can be implemented via an
Ethernet port. These capabilities speed up installation at remote
endpoints by eliminating the need to provide AC power to the device
and reducing the number of independent network drops required
within a system. Housed in a 1" (2.5 cm) high, half rack width
metal enclosure, the of the XTP T USW 103 allow for discreet
placement in space-challenged environments.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair
cable, shielded RJ-45 plugs, jacks, and couplers engineered for
optimum signal transmission with Extron XTP Systems. The XTP DTP 24
cable is certified to 475 MHz, and utilizes a SF/UTP design with
four unshielded 24 AWG twisted pair conductors inside an overall
braid and foil shield for superior performance and noise
immunity.
|
• Transmits
HDMI or digitized analog video, audio, bidirectional RS-232 and IR,
and Ethernet up to 330 feet (100 m) over a shielded CATx cable
— The XTP T USW 103 provides high reliability and maximum
performance on an economical and easily installed cable
infrastructure.
• Two HDMI inputs and one VGA input
• Supports computer video up to 1920x1200, including HDTV
1080p/60 Deep Color and 2K — Supports digital signal
transmission up to 330 feet over a shielded twisted pair cable,
maintaining superior image quality at the highest resolutions.
• Compatible with CATx shielded twisted pair cable —
The XTP T USW 103 fully supports a maximum transmission distance of
330 feet (100 meters) for all compatible resolutions when used with
CATx shielded twisted pair cable. Shielded twisted pair cabling
with solid center conductor sizes of 24 AWG or better is
recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly
recommended for optimal performance
• Auto-switching between inputs — Auto-switching allows
for simple, unmanaged installation in locations such as within a
lectern or under a conference table. When multiple inputs are
active, the switching priority is configurable.
• Digital conversion of analog video formats — Analog
signals are digitized, ensuring that a reliable, high quality
digital video signal is sent to the output destination.
• Bidirectional RS-232 and IR insertion for AV device control
— Bidirectional RS-232 control and IR signals can be inserted
into the XTP output, allowing a remote device to be controlled
without the need for additional cabling.
• aaSupported HDMI specification features include data rates
up to 6.75 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio
formats, and CEC pass-through
• HDCP compliant — Ensures display of content-protected
media and interoperability with other HDCP-compliant devices.
• EDID Minder® automatically manages EDID communication
between connected devices — EDID Minder ensures that all
sources power up properly and reliably output content for
display.
• Key Minder® continuously verifies HDCP compliance for
quick, reliable switching — Key Minder authenticates and
maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single
source to multiple displays.
• Ethernet extension — Centralized 10/100 Ethernet
communication can be implemented via an Ethernet pass-through port
to reduce the amount of independent network drops required within a
system.
• Remote power capability — To simplify integration,
XTP transmitters and receivers can be powered by the XTP CrossPoint
matrix switcher.
• Supports multiple embedded audio formats — The XTP T
USW 103 is compatible with a broad range of multi-channel audio
signals, providing reliable operation with HDMI sources.
• Selectable analog stereo audio input embedding — By
embedding stereo audio into the signal stream, the transmitter
supports balanced/unbalanced audio for extended transmission. This
feature enables direct connection of separate stereo audio signals
from a laptop, Blu-ray Disc player, or other device.
• Audio input gain and attenuation — Allows the level
of gain or attenuation to be set, eliminating noticeable volume
differences when switching between sources.
• Supports EDID and HDCP transmission — DDC channels
are actively buffered, allowing continuous communication between
source and display.
• RS-232 control port — Enables the use of serial
commands for complete control and configuration via the Extron
Windows®-based control program, or integrated into a control
system. Extron products use the SIS™ - Simple Instruction Set
command protocol, a set of basic ASCII commands that allow for
quick and easy programming.
• Contact closure control port — Can be used for
external control of input switching.
• LED indicators for signal presence, HDCP, and power —
Provides visual indication of system status for real-time feedback
and monitoring of key performance parameters.
• RJ-45 signal and link status LED indicator for XTP port
— Provides a means for validating signal flow and operation
from transmitter to receiver, allowing quick identification of
connectivity issues.
• Compatible with all XTP integrated system products —
An XTP System is a flexible, reliable signal switching and
distribution system that provides a completely integrated solution
for multiple digital and analog formats.
• Front panel USB configuration port
• UL 2043 plenum rated — The XTP T USW 103 meets UL
2043 for smoke and heat release for installation within a plenum
airspace above a drop ceiling - power supply excluded.
Above-the-ceiling placement conceals the transmitter to prevent
theft, and is convenient for installing equipment when space inside
the room is limited.
• 1" (2.5 cm) high, half rack width metal enclosure —
Compact, low profile enclosure for discreet placement and
concealment.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient external universal power
supply included
|
|
NOTE
|
The XTP switcher can be used with other
Extron XTP products, with twisted pair cables connecting the
units.
|
|
|
NOTE
|
*Appropriate DVI-D to HDMI or DisplayPort to HDMI
cables or adapters are required for DVI or DisplayPort signal
input.
|
|
| Video |
|
Gain
|
Unity
|
|
Resolution range
|
|
Digital
|
Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking
|
|
Analog
|
Up to 1920x1200* or 1080p (HDTV)
* reduced blanking
|
|
Signal type
|
Single-link HDMI (or DVI-D*)
|
|
Digital
video
|
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital
component video (HDMI), actively buffered (supports all single-link
DVI (if using an optional adapter) and HDMI standards from 640x480
@ 60 Hz to 1900x1200 @ 60 Hz)
|
|
Consumer
Electronics Control (CEC)
|
Pass-through
|
|
EDID
and DDC
|
Supports Extended Display Identification Data (EDID) and
Display Data Channel (DDC) data using DVI and HDMI standards.
EDID and DDC signals are actively buffered.
|
|
HDCP
|
Compliant with High-bandwidth Digital Content Protection (HDCP)
using DVI and HDMI standards
|
|
HPD
|
Supports hot plug detection (HPD) of display as a pass-through
signal.
|
|
Maximum data rate
|
6.75 Gbps (2.25 Gbps per color)
|
|
Maximum pixel clock
|
165 MHz
|
|
Formats
|
RGB and YCbCr digital video
|
|
Standards
|
DVI 1.0, HDMI, HDCP 1.1
|
| Video input |
|
Number/signal type
|
1 analog RGBHV
2 single link HDMI (DVI-D or DisplayPort*) input
|
|
Connectors
|
1 female 15-pin HD
2 female HDMI type A
|
|
Nominal level
|
0.7 Vp-p for RGB
|
|
Minimum/maximum
levels
|
0.3 V to 1.45 V p-p
|
|
Impedance
|
75 ohms
|
|
Horizontal
frequency
|
30 kHz to 100 kHz
|
|
Vertical frequency
|
24 Hz to 120 Hz
|
| Interconnection between transmitter and
receiver |
|
Connectors
|
1 female RJ-45 per unit
|
|
Termination
standards
|
TIA/EIA T568B
|
|
Signal transmission
distance
|
330' (100 m) using shielded twisted pair or XTP DTP 24
cable
|
|
Cable
requirements
|
Solid conductor, 24 AWG or better
|
|
Cable
recommendations
|
400 MHz bandwidth, STP (Shielded Twisted
Pair)
|
|
NOTE
|
Extron
XTP DTP
24 shielded twisted pair cable is stongly recommended for optimal
performance.
|
|
| Audio |
|
Gain
|
|
Range
|
Adjustable, -18 dB to +18 dB
|
|
Default
|
Unbalanced output: 0 dB; balanced output +6
dB
|
|
Frequency response
|
20 Hz to 20 kHz, ±0.05 dB
|
|
THD + Noise
|
0.01% @ 1 kHz at nominal level
|
|
S/N
|
>90 dB, at maximum output, balanced
(unweighted)
|
|
Crosstalk
|
<-45 dB @ 20 kHz, -72 dB @ 1 kHz or below
|
|
Stereo channel
separation
|
>80 dB @ 20 Hz to 20 kHz
|
|
Sampling rates
|
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
|
|
Bit depths
|
16, 20, 24 bit
|
| Audio input |
|
Number/signal type
|
1 analog stereo, unbalanced or
2 digital audio, embedded from HDMI
|
|
Connectors
|
1 female 3.5 mm mini audio jack
2 female HDMI type A (shared with video input)
|
|
Source formats
|
LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital
Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0
Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES
Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2
Channel
|
|
Impedance
|
>10k ohms, unbalanced, DC coupled
|
|
Nominal level
|
+4 dBu (1.23 mVrms) balanced or -10 dBV (316 mVrms)
unbalanced
|
|
Maximum level
|
+7 dBv unbalanced
|
|
NOTE
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0
dBV ≈ 2 dBu
|
|
| Control/remote —
switcher |
|
Serial control port
|
1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw
connector, 3 pole
|
|
Baud rate and
protocol
|
9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no
parity
|
|
Serial control pin
configuration
|
1 = Tx, 2 = Rx, 3 = GND
|
|
USB control ports
|
1 front panel female mini USB B
|
|
USB standards
|
USB 2.0, low speed
|
|
Contact closure
|
(1) 3.5 mm captive screw connector, 4 pole
|
|
Contact closure pin
configuration
|
1 = input 1, 2 = input 2, 3 = input 3, 4 =
GND
|
|
Program control
|
Extron
control/configuration program for
Windows®
Extron Simple Instruction Set (SIS™)
|
| Control/remote — external device
(pass-through, unidirectional or
bidirectional) |
|
Serial control port
input/output
|
RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw
connector (uses 3 poles) (connector is shared with IR control
port)
|
|
Serial control port
output/input
|
1 set of proprietary signals on a female RJ-45
jack
|
|
Baud rates
|
Up to 115200 baud
|
|
Protocol
|
Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
|
|
Serial control pin
configuration
|
1 = Tx, 2 = Rx, 3 = GND
|
|
Ethernet pass-through
port
|
1 female RJ-45 connector
|
|
Ethernet data rate
|
10/100Base-T, half/full duplex with
autodetect
|
|
IR control port
|
(1) 3.5 mm, captive screw connector, 5 pole (connector is
shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to
40 kHz
|
|
IR control pin
configuration
|
3 = GND, 4 = IR Tx, 5 = IR Rx
|
| General |
|
Power supply
|
External
Input: 100 to 240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
|
|
Power consumption
|
|
Device
|
9.3 watts, 12 VDC
|
|
Device
and power supply
|
11.3 watts, 100-240 VAC, 50-60 Hz
|
|
NOTE
|
Each XTP switcher, transmitter, receiver can be
powered either locally by an external power supply or remotely
using an optional power injector.
|
|
|
Temperature/humidity
|
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%,
noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing
|
|
Cooling
|
Convection, no vents
|
|
Thermal dissipation
|
|
Device
|
29.4 BTU/hr
|
|
Device
and power supply
|
36.3 BTU/hr
|
|
Mounting
|
|
Rack
mount
|
Yes, with optional 1U high rack shelf
Back of the rack mountable with optional back-of-the-rack mounting
kit
|
|
Furniture
mount
|
Yes, with optional under-desk mounting kit
|
|
Enclosure type
|
Metal
|
|
Enclosure
dimensions
|
1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
|
|
Product weight
|
1.6 lbs (0.7 kg)
|
|
Shipping weight
|
4 lbs (2 kg)
|
|
Vibration
|
ISTA 1A in carton (International Safe Transit
Association)
|
|
Regulatory
compliance
|
|
Safety
|
CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and
smoke release, excluding the power supply.
|
|
EMI/EMC
|
CE**, C-tick, FCC Class A**, ICES, VCCI
|
|
Environmental
|
Complies with the appropriate requirements of RoHS,
WEEE.
|
|
NOTE
|
**CE and FCC testing is conducted with STP
(shielded twisted pair) cable.
|
|
|
Warranty
|
3 years parts and labor
|
|
NOTE
|
All nominal levels are at
±10%.
|
|
|
| |
|
|
| |
|
|
