Extron XTP SR HDMI

Extron XTP SR HDMI

XTP Scaling Receiver

Home > Extron > XTP Systems > XTP SR HDMI Extron XTP SR HDMIExtron XTP SR HDMI
 Extron XTP SR HDMI XTP Scaling Receiver
Extron XTP SR HDMI
Product Code: XTPSRHDMI
Buy Sell Sales Extron XTP SR HDMI

The Extron XTP SR HDMI is an XTP® receiver that scales HDMI, DVI, RGB, HD component video, and standard definition video to the optimal output resolution for the display. It accepts video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 m) over a shielded CATx cable. The receiver features HDMI audio de-embedding with digital S/PDIF or analog stereo audio outputs. It also allows Ethernet extension and insertion of bidirectional RS-232 and IR for LAN access and AV device control at remote locations. The XTP SR HDMI scaling receiver works with XTP Systems® for signal distribution and long-distance transmission to remote endpoints.

The XTP SR HDMI scaling receiver is HDCP compliant and supports 1080p/60 and 1920x1200 signals. It enables the reliable, long distance scaling and distribution of HDMI signals, supporting Deep Color up to 12-bit, embedded HD lossless audio formats, and CEC pass-through. In addition, DDC channels are actively buffered, allowing EDID and HDCP communication to be maintained between a source and display. Continuous communication ensures device compatibility and optimal signal transmission between devices.

The scaling receiver provides selectable output rates up to 1920x1200, including HDTV 1080p/60, to scale video to the optimal output resolution for the display. It also provides many integrator-friendly features such as Key Minder®, EDID Minder®, picture controls, on-screen menus, and audio controls for simplified installation. The XTP SR HDMI is ideally integrated into XTP Systems for precise and reliable scaling of video for digital displays.

The XTP SR HDMI includes Extron technologies to enhance and simplify integration with HDMI-equipped devices. For HDMI signals with protected content, Key Minder authenticates HDCP encryption to provide quick and reliable transmission across the cable infrastructure. If HDCP-encrypted content is sent to a non-compliant display, a full-screen green signal is sent, providing immediate visual notification that protected content cannot be viewed on the display. Another included Extron technology is EDID Minder, which ensures continuous EDID communication between devices.

In addition to high performance video, the scaling receiver accepts audio signals over the one cable. It provides signal distribution for HDMI embedded audio or audio de-embedding with multi-channel S/PDIF or two-channel balanced/unbalanced analog stereo and PCM audio. To precisely control audio, the XTP SR HDMI provides volume adjustment and muting. This variety of audio transmission and control features helps to simplify system design and reduce the number of cable runs between endpoints.

The XTP SR HDMI includes an RS-232 and IR insertion port, allowing bidirectional control of an AV device using the one cable. This feature simplifies integration with a control system for managing a remote display. Additionally, centralized 10/100 Ethernet communication can be implemented via Ethernet extension port to reduce the number of independent network drops required within a system. Finally, two relays on the receiver can be activated to operate a screen, projector lift, or other environmental element at the display location.

To further simplify system design, the scaling receiver can be powered by the matrix switcher over the same cable that transmits the AV and control signals. This capability speeds up installation at remote endpoints by eliminating the need to provide AC power to the device. Housed in a 1" (2.5 cm) high, half rack width metal enclosure, the remote powering capabilities and low profile design of the XTP SR HDMI allow for discreet placement in space-challenged environments.

Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ-45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron XTP Systems. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.

.
• Receives video with embedded audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 m) over a shielded CATx cable — The XTP SR HDMI provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
• Scales HDMI, DVI, RGB, HD component video, and standard definition video received from XTP devices
• Selectable output rates from 640x480 to 1920x1200, including HDTV 1080p/60 and 2K — The output rate can be selected using the on-screen menu system or via RS-232 control.
• Compatible with CATx shielded twisted pair cable — The XTP SR HDMI fully supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
• Bidirectional RS-232 and IR insertion for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing the remote display to be controlled without the need for additional cabling.
• Supported HDMI specification features include data rates up to 6.75 Gbps, Deep Color up to 12-bit, HD lossless audio formats, and CEC pass-through
• HDCP compliant — Ensures display of content-protected media and interoperability with other HDCP-compliant devices. Requires an HDCP-compliant transmitter to pass HDCP content with this scaling receiver.
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Key Minder® continuously verifies HDCP compliance for quick, reliable switching — Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching in professional AV environments, while enabling simultaneous distribution of a single source to multiple displays.
• Ethernet extension — Centralized 10/100 Ethernet communication can be implemented via an Ethernet pass-through port to reduce the amount of independent network drops required within a system.
• HDMI audio de-embedding with analog stereo and digital S/PDIF audio outputs — Digital HDMI audio is made available as a balanced or unbalanced analog stereo signal on captive screw connectors.
• Remote power capability — To simplify integration, XTP transmitters and receivers can be powered by the XTP CrossPoint matrix switcher.
• Supports multiple embedded audio formats
• Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
• Selectable HDMI audio pass-through — A rear panel toggle switch enables or disables audio signal pass-through on the HDMI output.
• HDMI to DVI Interface Format Correction — Automatically reformats HDMI source signals for output to a connected DVI display.
• Audio output volume adjustment and muting
• Contact closure device control — Enables control of room functions such as projector lifts, screen operations, and other environmental controls.
•Aspect ratio control — The aspect ratio of the video output can be controlled by selecting a FILL mode, which provides a full screen output, or a FOLLOW mode, which preserves the original aspect ratio of the input signal.
• Image freeze control — A live image can be frozen through RS-232 or Ethernet control.
• Internal test patterns for calibration and setup — Three test patterns are available, including grayscale, color bars, and alternating pixels.
• Comprehensive, LED indicators for signal presence, HDCP, and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
• RJ-45 signal and link status LED indicator for XTP port — Provides a means for validating signal flow and operation from transmitter to receiver, allowing quick identification of connectivity issues.
• Compatible with all XTP integrated system products — XTP is a flexible, reliable signal switching and distribution system that provides a completely integrated solution for multiple digital and analog formats.
• Front panel security lockout — Allows security lockout of front panel buttons except for input selection and volume adjustment.
• Front panel USB configuration port — Provides convenient access for setup, configuration, and firmware updates.
• RS-232 control — Using serial commands, the XTP SR HDMI can be controlled and configured via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.
• UL 2043 plenum rated — The XTP SR HDMI meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling - power supply excluded. Above-the-ceiling placement conceals the scaling receiver to prevent theft, and is convenient for installing equipment when space inside the room is limited.
• 1" (2.5 cm) high, half rack width metal enclosure — The low profile enclosure allows for discreet mounting such as above a projector or behind a flat-panel display.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient external universal power supply included

 

NOTE    

The XTP T HDMI transmitter and XTP SR HDMI receiver can be used together, with twisted pair cables linking the transmitter and receiver, or with other Extron XTP products.

NOTE    

*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

Video

   Gain 

Unity

   Resolution range 

Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking

   Signal type 

Single-link HDMI (or DVI-D*)

   Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz)

   Consumer Electronics
   Control (CEC) 
Pass-through

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Formats 

RGB and YCbCr digital video

   Standards 

DVI 1.0, HDMI, HDCP 1.1

Interconnection between transmitter and receiver

   Connectors 

1 female RJ-45 per unit

   Termination standards 

TIA/EIA T568B

   Signal transmission distance 

330' (100 m) using shielded twisted pair or XTP DTP 24 cable

      Cable requirements 

Solid conductor, 24 AWG or better

      Cable recommendations 

400 MHz bandwidth, STP (Shielded Twisted Pair)

    NOTE    

Extron XTP DTP 24 shielded twisted pair cable is stongly recommended for optimal performance.

Video processing

   Digital sampling 

24 bit, 8 bits per color, 165 MHz standard

   Colors 

16.78 million

Video output

   Number/signal type 

1 single link HDMI (or DVI-D*)

   Connectors 

1 female HDMI type A

   Scaled resolutions 

640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV: 480p
7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz, 9 = 75 Hz.

Audio

   Gain 

Unbalanced output: 0 dB; balanced output: +6 dB

   Frequency response 

20 Hz to 20 kHz, ±0.5 dB

   THD + Noise 

<0.1%, 20 Hz - 20 kHz at nominal level

   S/N 

>90 dB, at maximum balanced output (unweighted)

   Crosstalk 

≤-80 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>80 dB @ 1 kHz

   Sampling rates 

32 kHz, 44.1 kHz, 48 kHz, 96 kHz

   Bit depths 

16, 20, 24 bit

    NOTE    

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

   Number/signal type 

1 combined with the HDMI video output
1 analog stereo, balanced/unbalanced
1 digital audio via S/PDIF output connector

   Connectors 

(1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
1 female RCA jack (tip, ring)

   Supported formats 

 

      HDMI 

LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2 Channel

      S/PDIF 

LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog 

Analog stereo audio

      Analog 

50 ohms unbalanced, 100 ohms balanced

      S/PDIF 

75 ohms

   Maximum level (Hi-Z) 

>+12 dBV balanced; +6 dBV unblanced

   Gain error 

±0.5 dB channel to channel

   Volume control 

-100 dB to 0 dB (control 0 to 100 in 1 dB steps)

    NOTE    

Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Control/remote — receiver

   Serial control port 

1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole

   Baud rate and protocol 

9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity

Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = GND

   USB control ports 

1 front panel female mini USB B

   USB standards 

USB 2.0, low speed

   Program control 

Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS
)

Control/remote — external device (pass-through, unidirectional or bidirectional)

Serial control port input/output 

1 set of proprietary signals on a female RJ-45 jack

Serial control port output/input 

RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port)

   Baud rates 

Up to 115200 baud

   Protocol 

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

   Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = GND

   Ethernet pass-through port 

1 female RJ-45 connector

   Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

   IR control port 

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz

   IR control pin configuration 

3 = GND, 4 = IR Tx, 5 = IR Rx

   Relay number/type 

2 normally open relays

   Relay control connectors 

(1) 3.5 mm captive screw connectors, 4 pole

   Relay control contact rating 

24 V, 1 A

General

   External power supply 

External
Input: 100-240 VAC, 50-60 Hz 6 W max.
Output: 12 VDC, 1 A, regulated

   Power consumption 

      Device 

10.3 watts, 12 VDC

      Device and power supply 

12.3 watts, 12 VDC

    NOTE    

Each XTP transmitter or receiver can be powered either locally by an external power supply or remotely using an optional power injector.

   Temperature/humidity 

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

   Cooling 

Convection, no vents

   Thermal dissipation 

      Device 

33.8 BTU/hr

      Device and power supply 

40.9 BTU/hr

   Mounting

      Rack mount 

Yes, with optional 1U rack shelf

      Furniture mount 

Yes, with optional under-desk mounting kit

      Pole mount 

Attachable to a projector mount pole with optional PMK 350 kit

   Enclosure type 

Metal

   Enclosure dimensions 

1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)

   Product weight 

1.6 lbs (0.7 kg)

   Shipping weight 

4 lbs (2 kg)

   Vibration 

ISTA 1A in carton (International Safe Transit Association)

   Regulatory compliance 

      Safety 

CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.

      EMI/EMC 

CE**, C-tick, FCC Class A**, ICES, VCCI

      Environmental 

Complies with the appropriate requirements of RoHS, WEEE.

    NOTE    

**CE and FCC testing is conducted with STP (shielded twisted pair) cable.

   Warranty 

3 years parts and labor

    NOTE    

All nominal levels are at ±10%.

 
 

 

View our Articles on line 2023