| Extron XTP T HDMI XTP Transmitter for
HDMI |
Product Code:
XTPTHDMI
 |
The Extron XTP T HDMI is an
XTP® transmitter that sends video, audio, bidirectional RS-232
and IR, and Ethernet up to 330 feet (100 m) over a shielded CATx
cable. It is HDCP compliant, and supports 1080p/60 Deep Color and
1920x1200 signals. The transmitter also allows Ethernet extension
and insertion of bidirectional RS-232 and IR for LAN access and AV
device control at remote locations. The XTP T HDMI transmitter
works with XTP Systems® for signal distribution and
long-distance transmission between remote endpoints.
The HDCP-compliant XTP T HDMI enables the reliable, long distance
transmission of HDMI signals, supporting Deep Color up to 12-bit,
3D, HD lossless audio formats, and CEC pass-through. In addition,
DDC channels are actively buffered, allowing EDID and HDCP
communication to be maintained between a source and display.
Continuous communication ensures device compatibility and optimal
signal transmission between devices. As an added benefit, the XTP T
HDMI provides an active HDMI output that includes support of
embedded audio, allowing connection of a local monitor for
operation visibility and troubleshooting.
The transmitter supports multiple embedded digital audio formats
with HDMI embedded audio available on the HDMI connector. It
includes the capability to embed separate balanced/unbalanced
analog stereo audio signals in place of HDMI-embedded audio for
extended transmission. To precisely control the audio, the XTP T
HDMI provides audio input gain and attenuation. This wide variety
of audio transmission and control features helps to simplify system
design and reduce the number of cable runs between endpoints.
The XTP T HDMI includes an RS-232 and IR insertion port, allowing
bidirectional control of an AV device using the one cable. This
feature simplifies integration with a control system for managing
source devices. Additionally, centralized 10/100 Ethernet
communication can be implemented via Ethernet extension port to
reduce the number of independent network drops required within a
system.
To further simplify system design, the transmitter can be powered
by the matrix switcher over the same cable that transmits the AV
and inserted signals. This capability speeds up installation at
remote endpoints by eliminating the need to provide AC power to the
device. Housed in a 1" (2.5 cm) high, half rack width metal
enclosure, the remote powering capabilities and low profile design
of the XTP T HDMI transmitter allow for discreet placement in
space-challenged environments.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair
cable, shielded RJ-45 plugs, jacks, and couplers engineered for
optimum signal transmission with Extron XTP Systems. The XTP DTP 24
cable is certified to 475 MHz, and utilizes a SF/UTP design with
four unshielded 24 AWG twisted pair conductors inside an overall
braid and foil shield for superior performance and noise
immunity.
|
• Transmits
video, audio, bidirectional RS-232 and IR, and Ethernet up to 330
feet (100 m) over a shielded CATx cable — The XTP T HDMI
provides high reliability and maximum performance on an economical
and easily installed cable infrastructure.
• Supports computer video up to 1920x1200, including HDTV
1080p/60 Deep Color and 2K — Supports digital signal
transmission up to 330 feet over a shielded twisted pair cable,
maintaining superior image quality at the highest resolutions.
• Compatible with CATx shielded twisted pair cable —
The XTP T HDMI fully supports a maximum transmission distance of
330 feet (100 meters) for all compatible resolutions when used with
CATx shielded twisted pair cable. Shielded twisted pair cabling
with solid center conductor sizes of 24 AWG or better is
recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly
recommended for optimal performance
• Bidirectional RS-232 and IR insertion for AV device control
— Bidirectional RS-232 control and IR signals can be inserted
into the XTP output, allowing a remote device to be controlled
without the need for additional cabling.
• HDMI loop-through with selectable audio control — The
XTP T HDMI transmitter features an active HDMI output with support
for embedded audio for connection to a local monitor.
• Supported HDMI specification features include data rates up
to 6.75 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio
formats, and CEC pass-through
• HDCP compliant — Ensures display of content-protected
media and interoperability with other HDCP-compliant devices.
• EDID Minder® automatically manages EDID communication
between connected devices — EDID Minder ensures that all
sources power up properly and reliably output content for
display.
• Key Minder® continuously verifies HDCP compliance for
quick, reliable switching — Key Minder authenticates and
maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single
source to multiple displays.
• Ethernet extension — Centralized 10/100 Ethernet
communication can be implemented via an Ethernet pass-through port
to reduce the amount of independent network drops required within a
system.
• Remote power capability — To simplify integration,
XTP transmitters and receivers can be powered by the XTP CrossPoint
matrix switcher.
• Supports multiple embedded audio formats — The XTP T
HDMI is compatible with a broad range of multi-channel audio
signals, providing reliable operation with HDMI sources.
• Selectable analog stereo audio input embedding — By
embedding stereo audio into the signal stream, the transmitter
supports balanced/unbalanced audio for extended transmission. This
feature enables direct connection of separate stereo audio signals
from a laptop, Blu-ray Disc player, or other device.
• Audio input gain and attenuation — Allows the level
of gain or attenuation to be set, eliminating noticeable volume
differences when switching between sources.
• Supports EDID and HDCP transmission — DDC channels
are actively buffered, allowing continuous communication between
source and display.
• Comprehensive, LED indicators for signal presence, HDCP,
and power — Provides visual indication of system status for
real-time feedback and monitoring of key performance
parameters.
• RJ-45 signal and link status LED indicator for XTP ports
— Provides a means for validating signal flow and operation
from transmitter to receiver, allowing quick identification of
connectivity issues.
• Compatible with all XTP integrated system products —
XTP CrossPoint is a flexible, reliable signal switching and
distribution system that provides a completely integrated solution
for multiple digital and analog formats.
• Front panel USB configuration port
• UL 2043 plenum rated — The XTP T HDMI meets UL 2043
for smoke and heat release for installation within a plenum
airspace above a drop ceiling - power supply excluded.
Above-the-ceiling placement conceals the transmitter to prevent
theft, and is convenient for installing equipment when space inside
the room is limited.
• 1" (2.5 cm) high, half rack width metal enclosure —
Compact, low profile enclosure for discreet placement and
concealment.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient external universal power
supply included
|
|
NOTE
|
The XTP T HDMI transmitter and
XTP R HDMI receiver can be used together, with twisted pair
cables linking the transmitter and receiver, or with other Extron
XTP products.
|
|
|
NOTE
|
*Appropriate HDMI to DVI-D cables or adapters are
required for DVI signal input/output.
|
|
| Video |
|
Gain
|
Unity
|
|
Resolution range
|
Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking
|
|
Signal type
|
Single-link HDMI (or DVI-D*)
|
|
Digital
video
|
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital
component video (HDMI), actively buffered (supports all single-link
DVI (if using an optional adapter) and HDMI standards from 640x480
@ 60 Hz to 1920x1200 @ 60 Hz)
|
|
Consumer
Electronics Control (CEC)
|
Pass-through
|
|
EDID
and DDC
|
Supports Extended Display Identification Data (EDID) and
Display Data Channel (DDC) data using DVI and HDMI standards.
EDID and DDC signals are actively buffered.
|
|
HDCP
|
Compliant with High-bandwidth Digital Content Protection (HDCP)
using DVI and HDMI standards
|
|
HPD
|
Supports hot plug detection (HPD) of display as a pass-through
signal.
|
|
Maximum data rate
|
6.75 Gbps (2.25 Gbps per color)
|
|
Maximum pixel clock
|
165 MHz
|
|
Formats
|
RGB and YCbCr digital video
|
|
Standards
|
DVI 1.0, HDMI; HDCP 1.1
|
| Interconnection between transmitter and
receiver |
|
Connectors
|
1 female RJ-45 per unit
|
|
Termination
standards
|
TIA/EIA T568B
|
|
Signal transmission
distance
|
330' (100 m) using shielded twisted pair or XTP DTP 24
cable
|
|
Cable
requirements
|
Solid conductor, 24 AWG or better
|
|
Cable
recommendations
|
400 MHz bandwidth, STP (Shielded Twisted
Pair)
|
|
NOTE
|
Extron
XTP DTP
24 shielded twisted pair cable is stongly recommended for optimal
performance.
|
|
| Video output |
|
Number/signal type
|
1 single link HDMI (or DVI-D*)
|
|
Connectors
|
1 female HDMI type A
|
| Audio |
|
Gain
|
Unbalanced output: 0 dB; balanced output: +6
dB
|
|
Frequency response
|
20 Hz to 20 kHz, ±0.05 dB
|
|
THD + Noise
|
<0.1% @ 20 Hz - 20 kHz at nominal level
|
|
S/N
|
>90 dB, at maximum balanced output
(unweighted)
|
|
Crosstalk
|
≤-80 dB @ 1 kHz, fully loaded
|
|
Stereo channel
separation
|
>80 dB @ 1 kHz
|
|
Sampling rates
|
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
|
|
Bit depths
|
16, 20, 24 bit
|
| Audio output |
|
Number/signal type
|
1 analog stereo (2-channel), balanced/unbalanced
1 digital audio, embedded with HDMI output
1 digital audio via S/PDIF output connector
|
|
Connectors
|
(1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
1 female RCA jack
|
|
Supported formats
|
|
HDMI
|
LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital
Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0
Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES
Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2
Channel
|
|
S/PDIF
|
LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital
5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete
6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2
Channel
|
|
Analog
|
Analog stereo audio
|
|
Impedance
|
|
Analog
|
50 ohms unbalanced, 100 ohms balanced
|
|
Digital
|
75 ohms (for S/PDIF output)
|
|
Maximum level
(Hi-Z)
|
>+12 dBV balanced; +6 dBV unbalanced
|
|
Gain error
|
±0.5 dB channel to channel
|
|
Volume control
range
|
-100 dB to 0 dB (control 0 to 100 in 1 dB
steps)
|
|
NOTE
|
Attenuation = volume number minus 64. The default
is 0 dB = volume number 64.
|
|
|
NOTE
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈
2 dBu
|
|
| Control/remote —
receiver |
|
USB control ports
|
1 front panel female mini USB B
|
|
USB standards
|
USB 2.0, low speed
|
|
Program control
|
Extron
control/configuration program for
Windows®
Extron Simple Instruction Set (SIS™)
|
| Control/remote — external device
(pass-through, unidirectional or
bidirectional) |
|
Serial control port
input/output
|
1 set of proprietary signals on a female RJ-45
jack
|
|
Serial control port
output/input
|
RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector
(uses 3 poles) (connector is shared with IR control
port)
|
|
Baud rates
|
Up to 115200 baud
|
|
Protocol
|
Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
|
|
Serial control pin
configuration
|
1 = Tx, 2 = Rx, 3 = GND
|
|
Ethernet pass-through
port
|
1 female RJ-45 connector
|
|
Ethernet data rate
|
10/100Base-T, half/full duplex with
autodetect
|
|
IR control port
|
(1) 3.5 mm, captive screw connector, 5 pole (connector is
shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to
40 kHz
|
|
IR control pin
configuration
|
3 = GND, 4 = IR Tx, 5 = IR Rx
|
|
Relay number/type
|
2 normally open relays
|
|
Relay control
connectors
|
(1) 3.5 mm captive screw connectors, 4 pole
|
|
Relay control contact
rating
|
24 V, 1 A
|
| General |
|
Power supply
|
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
|
|
Power consumption
|
|
Device
|
8.9 watts, 12 VDC
|
|
Device
and power supply
|
10.8 watts, 12 VDC
|
|
NOTE
|
Each XTP receiver can be powered either locally by
an external power supply or remotely using an optional power
injector.
|
|
|
Temperature/humidity
|
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%,
noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing
|
|
Cooling
|
Convection, vents on sides and top
|
|
Thermal dissipation
|
|
Device
|
29.9 BTU/hr
|
|
Device
and power supply
|
36.6 BTU/hr
|
|
Mounting
|
|
Rack
mount
|
Yes, with optional 1U high rack shelf
|
|
Furniture
mount
|
Yes, with optional under-desk mounting kit
|
|
Enclosure type
|
Metal
|
|
Enclosure
dimensions
|
1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
|
|
Product weight
|
1.6 lbs (0.7 kg)
|
|
Shipping weight
|
4 lbs (2 kg)
|
|
Vibration
|
ISTA 1A in carton (International Safe Transit
Association)
|
|
Regulatory
compliance
|
|
Safety
|
CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and
smoke release, excluding the power supply.
|
|
EMI/EMC
|
CE**, C-tick, FCC Class A**, ICES, VCCI
|
|
Environmental
|
Complies with the appropriate requirements of RoHS,
WEEE.
|
|
NOTE
|
**CE and FCC testing is conducted with STP
(shielded twisted pair) cable.
|
|
|
Warranty
|
3 years parts and labor
|
|
NOTE
|
All nominal levels are at
±10%.
|
|
|
| |
|
|
| |
|
|
