Extron IPL T PCS4
Four Port Power Control and Current Sensor

Extron Configurable Control Systems
Read our blog, or visit our new site
Home > Extron > Configurable Control Systems > IPL T PCS4
Extron IP T PCS4  Four Port Power Control and Current Sensor
Extron IPL T PCS4
Product Code: IPLTPCS4
 Buy Sell Sales Extron IPL T PCS4

The IPL T PCS4 Four Port Power Control and Current Sensor offers centralized power management for up to four AC outlets. The IPL T PCS4 features four 120VAC Edison outlets with a maximum 10 amp load and integrates Ethernet technology into systems, enabling flexible, centralized, Web-based power and device management.
• Four female Edison A/C outlets
• Remote on/off control of individual AC power outlets — Individual AC outlets can be turned ON or OFF from any Web-browser by an administrator and scheduled for automatic powering ON and OFF daily. Users can view the real time status and current schedule for all connected devices. Monitoring AV device status with intelligent sensing capabilities provides proactive maintenance and service capabilities.
• Intelligent current sensing with alarm thresholds — User defined thresholds can be set for specific AV devices denoting full power consumption, standby status or an off and physically disconnected state. Administrators can monitor AV systems for conditions or events that are inappropriate, such as unwanted power down situations or unplanned disconnected products.
• Power up sequencing — Prevents an in-rush power overload. In the event of power loss and restart, power outlet receptacles can be powered on sequentially with a user-configurable delay between each one. The power up sequencing feature precludes all outlets from powering-on at once, averting a power overload spike and a blown fuse or tripped circuit breaker.
• Outlet grouping — Allows two or more receptacles to be linked so that power can be cycled to them simultaneously with one command. This feature works well for computer workstations and other equipment with two or more AC requirements.
• Front panel security lockout — If used in an unsecured environment where easy access is undesirable, a security lock-out feature may be implemented. During lock-out mode, a special button combination is required to operate the front panel.
• Outlet status retention during power loss — The internal memory of the IPL T PCS4 is unaffected with power loss, ensuring that only those devices that were on before the outage will be restarted. In addition, configured outlet grouping, thresholds, and all other user defined settings are retained in the event of power outage.
• Contact closure alarm port — Alarm conditions can actuate a contact closure based on user defined parameters. This is useful for simple alarm notification and diagnostic applications where an enhanced control system is not present.
• Integrated high performance Web server — The IPL T PCS4 features a built-in Web server with memory available for storing device drivers, GlobalViewer, and custom user Web pages.
• 7.25 MB of available flash memory
• Supports industry standard communications protocols — All IP Link models use industry standard communication protocols, including ARP, ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, and Telnet.
• Simultaneous multi-user support — Each IP Link device supports multiple concurrent users, improving system throughput.
• Multiple levels of access with password protection — User access level authorizes limited entry to only pre-designated functions, while administrator access level permits full access to advanced settings.
• Free, easy-to-use Global Configurator software — Global Configurator software, a free Windows® based configuration utility, makes product setup simple and intuitive – no programming knowledge is required.
• Free GlobalViewer® Web-based AV resource management application — When used with GlobalViewer, IP Link control processors provide a powerful, flexible way to manage, monitor, and control both Extron and third-party equipment like projectors, plasmas, monitors, VCRs, DVD players, and other devices using a standard TCP/IP network.
Ethernet control interface
   Connectors  1 female RJ-45 female connector
   Data rate  10/100Base-T, half/full duplex with autodetect
   Protocols  ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
   Default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Web server  Up to 200 simultaneous sessions
960 kB nonvolatile user memory
   Program control  Extron Simple Instruction Set (SIS™)
   Global Viewer requirements  Microsoft® Internet Explorer ver. 6 or higher
AC control interface
   Connectors   
      IPL T PCS4  4 USA/Edison power connectors
      IPL T PCS4i  4 IEC power connectors
   Voltage   
      IPL T PCS4  120 VAC, 50-60 Hz
      IPL T PCS4i  220 VAC, 50-60 Hz
   Minimum AC load   
      IPL T PCS4  20 mA, 2.4 watts at 120 VAC
      IPL T PCS4i  20 mA, 4.4 watts at 220 VAC
   Maximum AC load, aggregate   
      IPL T PCS4  10 A, 1200 watts at 120 VAC
      IPL T PCS4i  10 A, 2200 watts at 220 VAC
   Maximum AC load, individual   
      IPL T PCS4  10 A, 1200 watts at 120 VAC
      IPL T PCS4i  10 A, 2200 watts at 220 VAC
   Current sense   
      Range  5 mA to 10 A
      Resolution  0.1 mA steps from 5 mA to 99.9 mA
1 mA steps from 100 mA to 999 mA
10 mA steps from 1 A to 10 A
      Tolerance  ±20%
Alarm relay control
   Quantity/type  1 normally open relay
   Connector  (1) 3.5 mm captive screw connector, 2 pole
   Contact rating  24 V, 1 A
General
   Power input   
      IPL T PCS4  Internal
120 VAC, 50-60 Hz
15 watts
      IPL T PCS4i  Internal
220 VAC, 50-60 Hz
15 watts
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Mounting   
      Rack mount  Yes, with optional 1U rack shelf
      Furniture mount  Yes, under-furniture mountable with optional mounting kit
   Enclosure type  Metal
   Enclosure dimensions  1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.0 cm W x 24.1 cm D)
(Depth excludes connectors.)
   Product weight  2.6 lbs (1.2 kg)
   Shipping weight  5 lbs (3 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety   
         IPL T PCS4  CE, c-UL, UL
         IPL T PCS4i  CE
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.