|
|
| Videosolutions TH-31 HDMI to Fiber Optic
Converter |
|
|
Product Code: TH31
|
TH-31 is optical
transmitter and intended for real time converting from HDMI to
digital optical signal and simultaneously to SD/HD SDI interfaces.
It can be used for transferring HDMI content to long distance (up
to 10km) from remote sources (studios) such us: media players,
camcorders, video mixers, switchers, PC and other video sources to
HDMI devices such as monitors, encoders, projector etc. The device
receives HDMI signal from input connector, and then converts it to
the
digital optical signal. Transmitter has one additional SDI output
for monitoring on SDI monitors or for any other purpose.
Applications:
Extending of HDMI interfaces in big Studios, Airports,
Supermarkets, Churches, Security systems,
Digital signage systems etc.
|
| Features of TH-31: |
· Converts HDMI to Fiber Optic signal in real time
including embedded audio without delay
· Supports:
1920x1080/50i, 1920x1080/59.94i,1280x720/59.94p, 720x576/50i,
720x480/59.94i
· Embedded Audio (up to 16 Channels)
· Status
LED's
· Compact size
|
| Specifications of TH-31: |
| Video input |
HDMI 1.3, EEDID
1920x1080/50i, 1920x1080/59.94i,
1280x720/59.94p, 720x576/50i, 720x480/59.94i
|
|
Fiber optic
output |
Wavelength: 1310 nm(1550nm)
Type: Single-mode
Optical power: Better than -7 dBm
Data rates: 1485 / 1483 / 270 /143Mbps
Optical connectors: SC
|
| Control SDI Video Output |
SD-SDI SMPTE259M
720x 576/50i(PAL), 720x480/59.94i(NTSC)
HD-SDI SMPTE292M 1920x1080/50i, 1920x1080/59.94i,
1280x720/59.94p
Embedded audio SDI SDI-ANC
SDI-AUD SMPTE291M , SMPTE272M
Linear PCM, 20bit/48kHz, 16ch
|
| Control |
Vendor commands
Software and driver for Windows
DIP Switch + LEDs
Manual mode selection/indication
|
| Connectors |
HDMI TYPE A (19 pin)
x 1
Optical connectors: SC
POWER DC JACK 5.5mm x 1
|
| Power supply |
7-25VDC, 0,5A max, from DC Jack
|
| Dimensions, mm |
(H
x W x D): 110 x 60 x 25mm
|
| Weight |
0.12kg
|
NOTE:
Device use direct conversion with embedded audio.
Output mode equal input mode.
No scaling or frame rate conversion supported.
|
| |
|
|
|
