Video Solutions 8-channel HD/SD SDI Over Fiber Optic Extender
Product Code: 8CHHDSDIFIBEREXTNDER
Features
- Converts the 2 of serial digital video signals into
light pulses
- Transmitted through the optical cable (Single mode)
- Transceiving of SDI signals via fiber is performed in
1510-1570 nm optical window
- Multiplexing of channels are optical.
-
Extender is used to connect
two distant TV studios (up
to 20 km) or studio with the
transmission center, where
it is necessary to have 4
independent channels of
communication .The
TRANSMITTER converts up to
four channels of serial
digital signals on BNC
connectors to light pulses
that are transmitted over a
single fiber optical
cable(Single mode). The
RECEIVER converts the pulses
back into four HD-SDI
,SD-SDI signals.
Transceiving of SDI signals
via fiber is performed in
1510-1570 nm optical window.
DFB lasers are used .
Multiplexing of channels are
optical. All embedded in SDI
data (audio signals, data,
etc.) are save.
|
|
Max Data rate |
Up to 1,5Gbps for each
SDI input. |
|
SDI Outputs |
4 channels on BNC
connectors. |
|
Cable |
One single mode fiber
optic cable with SC
connectors |
|
Supporting protocols |
SMPTE 259M
(143Mbps,270Mbps),
SMPTE 292M (1.485Gbps
and 1.485/1.001Gbps),
DVB ASI (270Mbps) |
|
Automatic detection |
143Mbps / 270Mbps /
1.483Gbps / 1.485Gbps |
|
Reclocking &
Equalization per each
Channel. |
|
Receiver |
|
Inputs |
1 optical connector SC |
|
Outputs |
8 SDI serial video, 75
ohm on BNC connectors |
|
Transmitter |
|
Output |
1 optical connector SC |
|
Inputs |
8 SDI serial video, 75
ohm on BNC connectors |
|
Bandwidth |
Upto 1.5Gbps for each
SDI input |
|
Fiber Optic Extension |
Upto 20km HD-SDI |
|
Transmitter output power |
-3 dBm |
|
Receiver sensitivity |
-26 dBm |
|
Optical source |
DFB Laser Diode |
|
Operating wavelength |
1550 nm Optical window |
|
Fiber-optic Connection |
SC connectors for single
mode fiber cable |
|
Power Source |
100-240V AC |
|
Dimensions |
1U, 19" rack-mount |
|
|
