|
Professional prompter VSS-19P is
constructed under the
traditional scheme and intended
for a projection of the readable
text to the translucent glass
located in front of the camera
lens. The text are completely
reflected in the direction of
the announcer, without falling
into formed by the camera the
video signal. Provides video
shootings with any types of
videocameras.
Uses a special mirror
(Broadcast Quality Ultraclear
Beamsplitter) with the main,
semi-transparent layer of
amalgam 70/30 ( transparency /
reflectance) and an additional
anti-reflection (AR) coating,
minimizing unwanted reflections
from inner side of the mirror to
prevent ghosting.
The basis of this design of
prompter is Base plate platform
made of polished stainless steel
tubes, where are three movable
mounting plates and mounting
hardware for front part of the
prompter (tube with a mirror and
a monitor). The upper mounting
plate is designed to mount the
camcorder. The lower plate
provides mount on a pedestal or
tripod. The back plate - for set
the counterweight for balancing
system.
The base plate provides free
horizontal movement of the
mouting plates, fixing them in
the desired position, and
provides vertical movement up /
down of the tubes with the
mirror and the monitor relative
to a fixed base plate with
camera and fixing in position
that allows to adapt the design
to use camera of any size.
There is ability to change
the angle of the mirror up to 55
degrees, it is allows you to use
the camera with a wide angle
lens.
Loose (non-rigid)
fixing the mirror inside the
hood makes it easy to remove it
for replace, to clean and to
safe transportation.
Options:
- Sunlight readable monitor
1000nits
- Tally light,
normal or sevensegments.
-
Talent Feedback Monitor (from
10’ to 40’)
- Spare
beamsplitter
- Foot and Hand
pedals
- Time Code Display
- Contour Shuttlexpress
- VGA
cable extender 20m
- Extender
cable for pedals
- Presenter
|
