Video Solutions 2-channel Duplex HD/SD SDI Over Fiber Optic 
				Extender
				
				Product Code: 2CHHDSDIFIBEREXTNDER
				
					
						| 2-Ch HD 
						SDI Over Fiber Optic Extender |  | 
					
						| 2-Ch SD SDI 
						Over Fiber Optic Extender |  | 
				
				
				
				
				 
				
				Features
				
					- Converts the 2 of serial digital video signals into 
					light pulses
- Transmitted through the optical cable (Single mode) 
- Transceiving of SDI signals via fiber is performed in 
					1510-1570 nm optical window
- Multiplexing of channels are optical.
 
			
				
					
						
							| 
								
								
									
										
											
												| 
													
													
													Extender is used to connect 
													two distant TV studios (up 
													to 20 km) or studio with the 
													transmission center, where 
													it is necessary to have two 
													independent channels of 
													communication in the both 
													sides. Each of devices of 
													transceiver pairs converts 
													the 2 of serial digital 
													video signals into light 
													pulses transmitted through 
													the optical cable (Single 
													mode) and simultaneously 
													converts the light pulses 
													received from the optical 
													cable back into the HD-SDI, 
													SD-SDI signals. Transceiving 
													of SDI signals via fiber is 
													performed in 1510-1570 nm 
													optical window. DFB lasers 
													are used. Multiplexing of 
													channels are optical. All 
													embedded in SDI data (audio 
													signals, data, etc.) are 
													save. |  
									
										
											
												| 
													
														| Max Data rate | Up to 1,5Gbps for each 
														SDI input. |  
														| SDI Outputs | 2 channels on BNC 
														connectors. |  
														| Cable | One single mode fiber 
														optic cable with SC 
														connectors |  
														| Supporting protocols | SMPTE 259M 
														(143Mbps,270Mbps), SMPTE 292M (1.485Gbps 
														and 1.485/1.001Gbps),
 DVB ASI (270Mbps)
 |  
														| Automatic detection | 143Mbps / 270Mbps / 
														1.483Gbps / 1.485Gbps |  
														| Reclocking & 
														Equalization per each 
														Channel. |  
														| Receiver |  
														| Inputs | 1 optical connector SC |  
														| Outputs | 2 SDI serial video, 75 
														ohm on BNC connectors |  
														| Transmitter |  
														| Output | 1 optical connector SC |  
														| Inputs | 2 SDI serial video, 75 
														ohm on BNC connectors |  
														| Bandwidth | Upto 1.5Gbps for each 
														SDI input |  
														| Fiber Optic Extension | Upto 20km HD-SDI |  
														| Transmitter output power | -3 dBm |  
														| Receiver sensitivity | -26 dBm |  
														| Optical source | DFB Laer Diode |  
														| Operating wavelength | 1510, 1530, 1550, 1570 
														nm |  
														| Fiber-optic Connection | SC connectors for single 
														mode fiber cable |  
														| Power Source | 100-240V AC |  
														| Dimensions | 1U, 19" rack-mount |  |  |