|
Overview Extender
is used to connect two distant TV studios (up to 20 km) or studio with the
transmission center, where it is necessary to have two independent channels of
communication in the both sides. Each of devices of transceiver pairs converts
the 2 of serial digital video signals into light pulses transmitted through the
optical cable (Single mode) and simultaneously converts the light pulses
received from the optical cable back into the SD-SDI signals. Transceiving of
SDI signals via fiber is performed in 1510-1570 nm optical window. DFB lasers
are used . Multiplexing of channels are optical. All embedded in SDI data (audio
signals, data, etc.) are save.
Specifications:
Max. Data Rate Up to 1,5Gbps for each SDI input.
SDI Outputs 2 channels on BNC connectors.
Cable one single mode fiber optic cable with SC connectors.
Supports following protocols:
SMPTE 259M (143Mbps,270Mbps),
DVB ASI (270Mbps)
Reclocking & Equalization per each Channel.
Receiver:
INPUTS: 1 optical connector SC.
OUTPUTS: 2 SDI serial video, 75Ω on BNC connectors.
Transmitter:
OUTPUT: 1 optical connector SC.
INPUTS: 2 SDI serial video, 75Ω on BNC connectors.
BANDWIDTH: Up to 1,5Gbps for each SDI input.
FIBER OPTIC EXTENSION: Up to 20km HD-SDI.
Transmitter output power: -3 dBm
Receiver sensitivity: -26dBm.
Optical source- DFB Laser diode.
Operating wavelength: 1510, 1530, 1550, 1570 nm.
FIBER-OPTIC CONNECTION: SC connectors for single mode fiber cable.
POWER SOURCE: 100-240V AC.
DIMENSIONS: 1U, 19" rack mount .
|
