|
Videosolutions HDMI OVer Fiber
Optic Extender |
|
Product Code: HDMI Fiber Optic
Extender
|
Overview:
|
Extender requires RH-31 optical
receiver and TH-31 optical transmitter. HDMI can be transmitted up
to 10km over single mode fiber. The extender is a quality and
economical solution designed for transmission of HDMI video with
embedded audio over a single mode optical fiber cable. It can be
used for importing unrestricted (No HDCP) HD content from any of
HDMI video sources such as cameras, media players, PC, Videoservers
etc. to long distance in big Studios, Airports, Supermarkets,
Churchs, Security systems etc. The transmitter module receives one
HDMI signal and converts it to optical SDI signal. The receiver
module receives the optical signal from input SC connector, and
then converts it back to the
electrical HDMI signal. The TH-31 transmitter is a class 1 laser
product. Transmitter and Receiver has one additional SDI output for
monitoring on SDI monitors or for any other purpose.
|
Features of HDMI Over Fiber Optic
Extender: |
· Converts
HDMI over Fiber Optic in real time including embedded audio without
delay · Supports: 1920x1080/50i, 1920x1080/59.94i,1280x720/59.94p,
720x576/50i, 720x480/59.94i · Embedded Audio (up to 16
Channels) · Status LED's · Compact
size
|
Specifications of
HDMI Over Fiber Optic Extender: |
Fiber optic |
Wavelength:
1550nm
Type: Single-mode
Optical power: Better than -7 dBm
Data rates: 1485 / 1483 / 270 /143Mbps
Optical connectors: SC
|
Video Input |
HDMI 1.3, EEDID
1920x1080/50i, 1920x1080/59.94i,
1280x720/59.94p, 720x576/50i, 720x480/59.94i
|
Audio Input |
HDMI 1.3. EEDID
Linear PCM, 24bit/48kHz, up to 16ch
|
Video Output |
HDMI 1.3, EEDID
1920x1080/50i, 1920x1080/59.94i,
1280x720/59.94p, 720x576/50i, 720x480/59.94i
|
Audio Output |
HDMI 1.3 EEDID
Linear PCM, 24bit/48k Hz, upto 16ch
|
Control |
Vendor commands
Software and driver for Windows
DIP Switch + LEDs
Manual mode selection/indication
|
Connectors |
HDMI TYPE A (19 pin)
x 1
USB SMALL USB ON THE GO (5 pin) x 1
POWER DC JACK 5.5mm x 1
|
Power
supply |
7-25VDC, 0,5A max, from DC Jack
|
Dimensions, mm |
(H x W x
D): 110 x 60 x 25mm
|
Weight |
0.12kg
|
NOTE:
Device use direct conversion with embedded audio.
Output mode equal input mode.
No scaling or frame rate conversion supported.
|
|
|
|
|