| AT849, Stereo Boundary Microphone |
Product Code: AT849
|
With true stereo output and twin XLR output connectors, the AT849 Stereo Condenser Boundary Microphone features closely matched, optimally positioned
elements that deliver the spatial impact and realism of a live sound field. The mic features a low-profile design for minimum visibility.
|
|
| AT849 Features |
• For surface-mount applications in broadcast, professional recording and sound reinforcement
• Closely-matched elements deliver the
impact/realism of a live sound field
•
Switchable low-frequency roll-off; low profile design for minimum visibility
|
|
AT849 Specifications
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
X/Y Stereo |
| Frequency Response |
30-20,000 Hz |
| Low Frequency Roll-off |
150 Hz, 6 dB/octave |
| Open Circuit Sensitivity |
–40 dB (10.0 mV) re 1V at 1 Pa |
| Channel Balance |
?2.5 dB |
| Impedance |
200 ohms balanced |
| Maximum Input Sound Level |
137 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range (Typical) |
110 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
67 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
9-52V DC, 2 mA typical (each channel) |
| Switch(es) |
Flat, roll-off |
| Weight |
149 g (5.3 oz) |
| Dimensions |
92.0 mm (3.62") maximum length, 73.0 mm (2.87") maximum width |
| Output Connector |
Integral 5-pin TB5M |
| Cable(s) |
7.6 m (25') long, shielded, vinyl-jacketed, stereo cable with 5-pin TA5F connector at microphone end, two 3-pin XLRM-type connectors at output end |
| Accessory Included |
Soft protective pouch |
|
|
|
MKH 416
UWP-D11
UWP-D12
UWP-D16
MKE 600
|
